THERMODYNAMIC The specifications of a typical reciprocating internal combustion engine coupled with a generator are given...

THERMODYNAMIC

The specifications of a typical reciprocating internal combustion engine coupled with a
generator are given in Table Q2. With the aid of a P-v diagram, determine the following
engine performance characteristics by using constant specific heat at room temperature:
i) the total mass contained in the cylinder per cycle,
ii) the mass of fuel burned per cycle,
iii) the mean effective pressure,
iv) the engine power in kW, and
v) the specific fuel consumption in g/kWh .

Table Q2
Item Specification
Cycle 4-stroke
Fuel Type Diesel
Fuel Calorific Value 43 MJ/kg
Combustion Efficiency(%) 95
Compression Ratio 19
No. of Cylinder 4
Engine Capacity (cc) 2000
Intake Pressure (kPa) 95 kPa
Intake Temperature (°C) 30
AFR 28:1
Engine Speed (rpm) 1800

Solutions

Expert Solution

samet mamat answered 4 months ago

Next > < Previous

Related Solutions

Research how an internal combustion engine operates. Describe four steps of a combustion cycle. What materials...

Research how an internal combustion engine operates. Describe four steps of a combustion cycle. What materials go in and out of the engine during each step? How many cylinders are involved in one cycle? What energy processes take place during each stroke? In which steps is work done?

combustion engine. Discuss the thermodynamics of the Otto cycle for a combustion engine. Why does the...

combustion engine. Discuss the thermodynamics of the Otto cycle for a combustion engine. Why does the efficiency depend on the compression ratio? What is the problem with that? Why is the Otto cycle better than a steam engine? Or, what is the main innovation

The displacement volume of an internal combustion engine is 2.19 liters. The processes within each cylinder...

The displacement volume of an internal combustion engine is 2.19 liters. The processes within each cylinder of the engine are modeled as an air-standard Diesel cycle with a cutoff ratio of 2.5. The state of the air at the beginning of compression is fixed by p1 = 1.6 bar, T1 = 325 K and V1 = 2.36 liters. If the cycle is executed 2100 times per min, determine: a) the compression ratio, b) the net work per cycle, in kJ,...

The displacement volume of an internal combustion engine is 2.22 liters. The processes within each cylinder...

The displacement volume of an internal combustion engine is 2.22 liters. The processes within each cylinder of the engine are modeled as an air-standard Diesel cycle with a cutoff ratio of 2.5. The state of the air at the beginning of compression is fixed by p1 = 1.6 bar, T1 = 325 K and V1 = 2.36 liters. If the cycle is executed 2100 times per min, determine: a) the compression ratio, b) the net work per cycle, in kJ,...

The displacement volume of an internal combustion engine is 2.21 liters. The processes within each cylinder...

The displacement volume of an internal combustion engine is 2.21 liters. The processes within each cylinder of the engine are modeled as an air-standard Diesel cycle with a cutoff ratio of 2.5. The state of the air at the beginning of compression is fixed by p1 = 1.6 bar, T1 = 325 K and V1 = 2.36 liters. If the cycle is executed 2100 times per min, determine: a) the compression ratio, b) the net work per cycle, in kJ,...

1- You need to analyze the operation and performance of a four-stroke, spark-ignition internal combustion engine...

1- You need to analyze the operation and performance of a four-stroke, spark-ignition internal combustion engine (automobile engine). a- Would you analyze the engine as an Open System or a Closed System? b- How many properties of the engine exhaust would you need to measure in order to determine the Thermodynamic State of the exhaust gas? c- Identify a set of properties of the exhaust gas that you might measure to establish its state. d- Are these properties Intensive or...

1. Buyers of new cars can consider Internal Combustion Engine (ICE) cars or new electric cars...

1. Buyers of new cars can consider Internal Combustion Engine (ICE) cars or new electric cars (EVs). If the price of ICE cars goes up because of a higher carbon tax, then the demand for EV cars will increase. Is it True or False? 2. An increase in the cost of aluminium will cause the supply of soft-drink cans to increase. Is it True or False? 3.The incidence of a tax is shared between buyers and sellers in the long...

Create a thermodynamic argument for how ATP hydrolysis can be coupled to drive endergonic reactions.

The thermodynamic properties of foods can be discussed in terms of the enthalpy of combustion per...

The thermodynamic properties of foods can be discussed in terms of the enthalpy of combustion per gram of food. Do you get more energy from the metabolism of one gram of sugar or one gram of fat? Answer this question quantitatively and with as much thermodynamic detail as possible. Use two of the following three methods to quantify your answer: (A) arithmetic method, (B) calorimetry, and/or (C) computational.

An engine is coupled to a rotating drum by a friction clutch which has a single...

An engine is coupled to a rotating drum by a friction clutch which has a single plate faced on each side with a ring of friction material. The inner and outer diameters of the friction faces are 224 mm and 300 mm respectively. The coefficient of friction is 0,3. Other data available are: axial pressure on plate = 1350 N ; engine torque is constant at 40,7 N.m inertia of engine equivalent to a flywheel of mass 20,7 kg; and...

Subjects