Consider a Class B network 180.60.0.0, subdivide this network into 4 subnets, and find A IP...

Consider a Class B network 180.60.0.0, subdivide this network into 4 subnets, and find

A IP address on each Subnet
B Subnet Mask for each Subnet
C Broadcast address for each Subnet.
D Maximum possible number of hosts in the whole network

Solutions

Expert Solution

venereology answered 1 year ago

Next > < Previous

Related Solutions

Consider a network with network ID. 192.168.56.0/24: Split the network into two subnets, A and B...

Consider a network with network ID. 192.168.56.0/24: Split the network into two subnets, A and B and provide the IP range, network ID, and broadcast of each. Show your work What is TCP three-step handshake? What happens if the handshake is not successfully completed? What technological development led to the CSMA/CD protocols becoming obsolete? Give an example of a networking protocol that we have discussed in class that utilizes UDP over TCP. Provide two pros and two cons to switiching...

Consider a Class C network 200.100.100.0. and divide it into 10 subnets, according the following requirements...

Consider a Class C network 200.100.100.0. and divide it into 10 subnets, according the following requirements of number of hosts on each subnet. Draw a diagram clearing labelling each subnet with its name (i.e. A, B, C etc.) and subnet ID. (Use variable length subnet mask) 30 Hosts 12 Hosts 28 Hosts 10 Hosts 25 Hosts 25 Hosts 30 Hosts 5 Hosts 15 Hosts 10 Hosts

You are given a block of IP address 200.128.1.0/24. Create a network with four subnets each...

You are given a block of IP address 200.128.1.0/24. Create a network with four subnets each having equal number of addresses. Connect two nodes in each subnet and configure the arrangement so that any node is able to communicate with the remaining nodes (within the subnet as well as in other subnets). Identify and analyze the configuration requirements. Verify the communication setup and reach ability with Ping diagnostic command. Your report should include the following: i. Network diagram (screenshots), ii....

18) For the network 192.168.140.68/27 determine: a) All the subnets b) Address ranges c)...

18) For the network 192.168.140.68/27 determine: a) All the subnets b) Address ranges c) Host ranges d) Network IDs e) Broadcast addresses

How many subnets and hosts are provided by the network 192.168.254.0/26 a. 4 networks with 64...

How many subnets and hosts are provided by the network 192.168.254.0/26 a. 4 networks with 64 hosts b. 4 networks with 62 hosts c. 254 networks with 62 hosts d. 2 network with 62 hosts

For the following IP A & B, do subnetting and give the first 5 Network IDs...

For the following IP A & B, do subnetting and give the first 5 Network IDs (Subnets) with first, last available IP addresses, and broadcast address. Class B: 150.5.0.0/16 A small company needs Cisco best practice: 500 Hosts per Network Class A: 10.0.0.0/8 The corporation needs: 1000 Hosts per Network

What is the range of IP addresses on a network if: A) IP: 192.168.1.1 Subnet mask...

What is the range of IP addresses on a network if: A) IP: 192.168.1.1 Subnet mask is: 255.255.255.0. B) 179.23.0.0/ 16 C) 10.0.0.0 Class A network.

Why is UDP/IP used to transmit and receive packetized voice signals over and IP network and...

Why is UDP/IP used to transmit and receive packetized voice signals over and IP network and not TCP/IP used in VoIP?

Consider a router with the: IP address 192.168.1.254/26 Subnet mask: 255.255.255.192 Network Address: 192.168.1.192 Write the...

Consider a router with the: IP address 192.168.1.254/26 Subnet mask: 255.255.255.192 Network Address: 192.168.1.192 Write the relevant DHCP subnet configuration text for this network where the first 50 addresses will be dynamically allocated to hosts.

You are planning to redesign a Classful 172.31.0.0 network to accommodate 3540 subnets with 10 hosts...

You are planning to redesign a Classful 172.31.0.0 network to accommodate 3540 subnets with 10 hosts per subnet. In your own words, explain what subnet masks you could use to satisfy this new requirement. You must use concepts such as host bits, hosts and subnets to justify your answer. Simply listing out subnet masks won’t be awarded any marks.

Subjects