Question

In: Computer Science

For the following IP A & B, do subnetting and give the first 5 Network IDs...

For the following IP A & B, do subnetting and give the first 5 Network IDs (Subnets) with first, last available IP addresses, and broadcast address.

  1. Class B: 150.5.0.0/16
    A small company needs Cisco best practice: 500 Hosts per Network
  1. Class A: 10.0.0.0/8

The corporation needs: 1000 Hosts per Network

Solutions

Expert Solution


Related Solutions

Classful Subnetting Given the following IP address of 212.134.99.112 with a subnet mask of 255.255.255.224 Class...
Classful Subnetting Given the following IP address of 212.134.99.112 with a subnet mask of 255.255.255.224 Class of the IP address: Net ID for this IP address: Total number of subnets: First address (subnet ID) and the Last address (broadcast address) that 21.134.99.112 belongs to: Find the subnet masks that create the following number of valid subnets in a Class B address.      # Valid Subnets Needed Subnet Mask 2 250 30 510 5 120 Give the maximum number of total...
Build the subnetting tables for the following data (Classful addressing): IP: 138.134.11.66 Mask:255.255.192.0
Build the subnetting tables for the following data (Classful addressing): IP: 138.134.11.66 Mask:255.255.192.0
Consider a Class B network 180.60.0.0, subdivide this network into 4 subnets, and find A IP...
Consider a Class B network 180.60.0.0, subdivide this network into 4 subnets, and find A IP address on each Subnet B Subnet Mask for each Subnet C Broadcast address for each Subnet. D Maximum possible number of hosts in the whole network
Give a formal proof for the following tautology by using the IP rule. (A →B) ^...
Give a formal proof for the following tautology by using the IP rule. (A →B) ^ (B →C) →(A v B →C)
IP Addressing Subnet the following IP network: 160.1XY.0.0/16 (XY is the last two digits of your...
IP Addressing Subnet the following IP network: 160.1XY.0.0/16 (XY is the last two digits of your Student ID) to accommodate 5 subnets, each subnet will subsequently have 300, 180, 65, 30 and 4 PCs. For each subnet find the subnet mask, network ID, broadcast IP and valid host range and complete the below table:
1. Give an example of the application for each of the following network models. (Do not...
1. Give an example of the application for each of the following network models. (Do not explain model with layers. Provide examples where these models are used). a. DoD model b. OSI c. RINA
What is the network address if given this IP address and the following subnet mask?  Please note...
What is the network address if given this IP address and the following subnet mask?  Please note that the network may be different if the subnet mask is different. IP address 178.47.188.176 How many network bits if the following subnet masks? 255.254.0.0 255.255.252.0 255.255.255.248    4. 255.128.0.0     
For the following two network interfaces, identify their IP address, host name, subnet id, prefix, and...
For the following two network interfaces, identify their IP address, host name, subnet id, prefix, and subnet mask. en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500      ether 6c:96:cf:d9:3f:0f      inet6 fe80::cb3:7b1b:362f:48bc%en0 prefixlen 64 secured scopeid 0x5      inet 10.21.136.95 netmask 0xffff0000 broadcast 10.21.255.255      nd6 options=201<PERFORMNUD,DAD>      media: autoselect      status: active awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484      ether 26:db:01:45:50:73      inet6 fe80::24db:1ff:fe45:5073%awdl0 prefixlen 64 scopeid 0x7      nd6 options=201<PERFORMNUD,DAD>      media: autoselect      status: active
IP Address: 37.124.67.99 Subnet Mask: 255.240.0.0 find Network address, Broadcast address, first valid host address, last...
IP Address: 37.124.67.99 Subnet Mask: 255.240.0.0 find Network address, Broadcast address, first valid host address, last valid host address and number of valid hosts in the network. show very clear steps for all the calculations.
Why do we need a TCP/IP-OSI hybrid (5) model, when we already have the TCP/IP model?
Why do we need a TCP/IP-OSI hybrid (5) model, when we already have the TCP/IP model?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT