Question

You are given a block of IP address 200.128.1.0/24. Create a network with four subnets
each having equal number of addresses. Connect two nodes in each subnet and configure the
arrangement so that any node is able to communicate with the remaining nodes (within the
subnet as well as in other subnets). Identify and analyze the configuration requirements. Verify
the communication setup and reach ability with Ping diagnostic command.
Your report should include the following:
i. Network diagram (screenshots),
ii. Explain what devices are used for the setup of the network, explanation of IP addresses
used for the setup, routing tables, connected routes, static routes, default routes and any
other configuration required
iii. Confirm the configuration is achieved according to the plan (commands, screenshots)
iv. and finally Verify that the two computers can communicate with each other using
reachability tests (screenshots),

Answer 1

Subnet	Mask	Subnet Size	Host Range	Broadcast
200.128.1.0	255.255.255.192	62	200.128.1.1 to 200.128.1.62	200.128.1.63
200.128.1.64	255.255.255.192	62	200.128.1.65 to 200.128.1.126	200.128.1.127
200.128.1.128	255.255.255.192	62	200.128.1.129 to 200.128.1.190	200.128.1.191
200.128.1.192	255.255.255.192	62	200.128.1.193 to 200.128.1.254	200.128.1.255

I have created 4 subnet as size was not given

Second network configuration

PC configuraiton

Communicaiton

You will need 1 router and 4 switch

if you have any doubt then please ask me without any hesitation in the comment section below , if you like my answer then please thumbs up for the answer , before giving thumbs down please discuss the question it may possible that we may understand the question different way and i can edit and change the answers if you argue, thanks :)