An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...

An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles per minute, in kW. d) the thermal efficiency. e) the mean effective pressure, in kPa.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...

An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.25 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...

An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...

An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.75 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...

An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2...

An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...

At the beginning of the compression process of an air-standard dual cycle with a compression ratio...

At the beginning of the compression process of an air-standard dual cycle with a compression ratio of 18, the temperature is 300K and the pressure is 0.1 MPa. The pressure ratio for the constant volume part of the heating process is 1:5:1. The volume ratio for the constant pressure part of the heating process is 1:2:1. Determine: (a.) The temperature and pressure at the end of each process of the cycle. (b.) The thermal efficiency. (c.) The mean effective pressure.

At the beginning of compression process of an air standard dual cycle operating with a compression...

At the beginning of compression process of an air standard dual cycle operating with a compression ratio of 15.88, the pressure is 95 kPa and the temperature is 300 K. The cutoff ratio for the cycle is 1.15. Determine the thermal efficiency of cycle, if the pressure increases by a factor of 2.15 during the constant volume heat addition process. Use table F2 for variation of specific heats with temperature in the analysis.

The compression ratio of an air-standard Otto cycle is 9.5. Prior to the isentropic compression process,...

The compression ratio of an air-standard Otto cycle is 9.5. Prior to the isentropic compression process, the air is at 100 kPa, 35°C and 600 cm3 . The temperature at the end of the isentropic expansion process is 800 K. Using specific heat values at room temperature (25°C), determine (a) the highest temperature and pressure in the cycle (b) the amount of heat transferred in during the cycle (kJ) (c) the thermal efficiency (d) the mean effective pressure Part (a)...

An ideal cold air-standard Otto cycle has a compression ratio of 9.2. At the end of...

An ideal cold air-standard Otto cycle has a compression ratio of 9.2. At the end of the expansion process, the pressure is 110 psi, the temperature is 1020 °R and the specific volume is 3.435 ft3/lbm. The heat rejection from the cycle is 92 BTU/lbm of air. Evaluate specific heat at 100 °F and calculate the following by hand: What is the mean effective pressure (psi)? The correct answer is 231.8 psi. Show every step and calculation with units necessary.to...

A cold air-standard Otto cycle has a compression ratio of 6 and the temperature and pressure...

A cold air-standard Otto cycle has a compression ratio of 6 and the temperature and pressure at the beginning of the compression process are 520°R and 14.2 lbf/in.2, respectively. The heat addition per unit mass of air is 500 Btu/lb. Assume constant specific heats evaluted at 520°R. Determine: (a) the maximum temperature, in °R. (b) the maximum pressure, in lbf/in.2 (c) the percent thermal efficiency. (d) the mean effective pressure, in lbf/in.2

An air-standard Otto cycle operates with a compression ratio of 8. At the start of the...

An air-standard Otto cycle operates with a compression ratio of 8. At the start of the compression stroke, the pressure is 15 psia and the temperature is 80 degrees F. The maximum pressure in the cycle is 550 psia. Find a) the thermal efficiency of the cycle, b) the specific volume at the start of the compression stroke, c) the specific volume at the end of the compression stroke, and d) maximum temperature in the cycle.

The compression ratio is 10 in the air standard Otto cycle. Pressure at the beginning of...

The compression ratio is 10 in the air standard Otto cycle. Pressure at the beginning of the compression stroke is 1XY kPa and the temperature is 15 ºC. The heat transfer to the air for each cycle is 18XY kJ / kg air. Draw the T-s and P-v diagrams. (x=9 y=8). Note: Accept that specific temperatures do not change with temperature. Take k = 1.4 and Cp = 1.0031 kJ / kg-K. a) For question 1, we draw the temperature...

Subjects