Question

In: Other

An ideal dual cycle has a compression ratio of 15 and a cutoff ratio of 1.4....

An ideal dual cycle has a compression ratio of 15 and a cutoff ratio of 1.4. The pressure ratio during constant-volume heat addition process is 1.1. The state of the air at the beginning of the compression is P1 = 98 kPa and T1 = 24°C. Calculate the cycle’s net specific work, specific heat addition, and thermal efficiency. Use constant specific heats at room temperature.

Solutions

Expert Solution


Related Solutions

An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression process, air is at 98 kPa, 30oC and 766 kJ/kg of heat is transferred to air during the constant-volume heat addition process. Determine (a) the pressure (p3) and temperature (T3) at the end of the heat addition process, (b) the net work output, (c) the thermal efficiency and (d) the mean effective pressure for the cycle. Use the IG model
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 95 kPa and 27°C, and 900 kJ/kg of heat is transferred to air during the constant-volume heat-addition process. Taking into account the variation of specific heats with temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle
An ideal Otto cycle has a compression ratio of 8.5 At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8.5 At the beginning of the compression process, air is at 98 kPa and 27∘C, If the Tmax cannot exceed 2300K and 3e-5 kg of. assuming constant specific heats at ambient temperature, determine (a) the pressure and temperature at the end of each process. (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle.
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 95 kPa and 27°C, and 730 kJ/kg of heat is transferred to air during the constant-volume heat-addition process. Take into account the variation of specific heats with temperature. The gas constant of air is R = 0.287 kJ/kg·K. Determine: (a) the pressure and temperature at the end of the heat addition process (b) the net work output (c) the thermal...
An air-standard dual cycle has a compression ratio of 14. At the beginning of compression, p1...
An air-standard dual cycle has a compression ratio of 14. At the beginning of compression, p1 = 14.5 lbf/in.2, V1 = 0.5 ft3, and T1 = 50°F. The pressure doubles during the constant-volume heat addition process. For a maximum cycle temperature of 3500°R, determine: (a) the heat addition to the cycle, in Btu. (b) the net work of the cycle, in Btu. (c) the percent thermal efficiency. (d) the mean effective pressure, in lbf/in.2
At the beginning of the compression process of an air-standard dual cycle with a compression ratio...
At the beginning of the compression process of an air-standard dual cycle with a compression ratio of 18, the temperature is 300K and the pressure is 0.1 MPa. The pressure ratio for the constant volume part of the heating process is 1:5:1. The volume ratio for the constant pressure part of the heating process is 1:2:1. Determine: (a.) The temperature and pressure at the end of each process of the cycle. (b.) The thermal efficiency. (c.) The mean effective pressure.
In an ideal standard dual cycle, the pressure and temperature at the beginning of compression are...
In an ideal standard dual cycle, the pressure and temperature at the beginning of compression are 1 bar and 47°C, respectively. The heat supplied in the cycle is 1250kJ/kg, two third of this heat is being added at constant volume and the remaining heat is added at constant pressure. If the compression ratio is 16, determine i. the maximum temperature in cycle ii. thermal efficiency of the cycle iii. the mean effective pressure
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2...
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.25 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT