Question

In: Mechanical Engineering

An air-standard dual cycle has a compression ratio of 14. At the beginning of compression, p1...

An air-standard dual cycle has a compression ratio of 14. At the beginning of compression, p1 = 14.5 lbf/in.2, V1 = 0.5 ft3, and T1 = 50°F. The pressure doubles during the constant-volume heat addition process.


For a maximum cycle temperature of 3500°R, determine:

(a) the heat addition to the cycle, in Btu.

(b) the net work of the cycle, in Btu.

(c) the percent thermal efficiency.

(d) the mean effective pressure, in lbf/in.2

Solutions

Expert Solution

samet mamat answered 5 months ago
Next > < Previous

Related Solutions

At the beginning of the compression process of an air-standard dual cycle with a compression ratio...
At the beginning of the compression process of an air-standard dual cycle with a compression ratio of 18, the temperature is 300K and the pressure is 0.1 MPa. The pressure ratio for the constant volume part of the heating process is 1:5:1. The volume ratio for the constant pressure part of the heating process is 1:2:1. Determine: (a.) The temperature and pressure at the end of each process of the cycle. (b.) The thermal efficiency. (c.) The mean effective pressure.
At the beginning of compression process of an air standard dual cycle operating with a compression...
At the beginning of compression process of an air standard dual cycle operating with a compression ratio of 15.88, the pressure is 95 kPa and the temperature is 300 K. The cutoff ratio for the cycle is 1.15. Determine the thermal efficiency of cycle, if the pressure increases by a factor of 2.15 during the constant volume heat addition process. Use table F2 for variation of specific heats with temperature in the analysis.
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2...
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.25 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2...
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.75 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles...
At the beginning of the compression process of an air standard Otto cycle, p1 = 1...
At the beginning of the compression process of an air standard Otto cycle, p1 = 1 bar, T1 = 300 K. The maximum temperature in the cycle is 2250 K and the compression ratio is 9.8. The engine has 4 cylinders and an engine displacement of Vd = 2.0 L. Determine per cylinder: a)    the volume at state 1. b)    the air mass per cycle. c)    the heat addition per cycle, in kJ. d)    the heat rejection per cycle, in kJ. e)    the net work...
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1...
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1 = 100 kPa and T1 = 310 K. The compression ratio is 18 and the cutoff ratio is 1.5. Determine: (a) the maximum temperature, in K. (b) the pressure at the end of the expansion, in kPa. (c) the net work per unit mass of air, in kJ/kg. (d) the percent thermal efficiency.
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1...
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1 = 100 kPa and T1 = 310 K. The compression ratio is 18 and the cutoff ratio is 1.5. Determine: (a) the maximum temperature, in K. (b) the pressure at the end of the expansion, in kPa. (c) the net work per unit mass of air, in kJ/kg. (d) the percent thermal efficiency
At the beginning of the compression process of an air standard Otto cycle, p1 = 1...
At the beginning of the compression process of an air standard Otto cycle, p1 = 1 bar, T1 = 300 K. The maximum temperature in the cycle is 2250 K and the compression ratio is 9.8. The engine has 4 cylinders and an engine displacement of Vd = 2.6 L. Determine per cylinder: a) the volume at state 1. (IN LITERS) I have tried 2.8L 0.945 L and 0.789 L but i keep getting it wrong. b) the air mass...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT