Question
In: Physics
A cold air-standard Otto cycle has a compression ratio of 6 and the temperature and pressure...
A cold air-standard Otto cycle has a compression ratio of 6 and the temperature and pressure at the beginning of the compression process are 520°R and 14.2 lbf/in.2, respectively. The heat addition per unit mass of air is 500 Btu/lb. Assume constant specific heats evaluted at 520°R. Determine:
(a) the maximum temperature, in °R.
(b) the maximum pressure, in lbf/in.2
(c) the percent thermal efficiency.
(d) the mean effective pressure, in lbf/in.2
Solutions
genius_generous answered 2 years agoRelated Solutions
An ideal cold air-standard Otto cycle has a compression ratio of 9.2. At the end of...
An ideal cold air-standard Otto cycle has a compression ratio of
9.2. At the end of the expansion process, the pressure is 110 psi,
the temperature is 1020 °R and the specific volume is 3.435
ft3/lbm. The heat rejection from the cycle is 92 BTU/lbm of air.
Evaluate specific heat at 100 °F and calculate the following by
hand: What is the mean effective pressure (psi)? The correct answer
is 231.8 psi. Show every step and calculation with units
necessary.to...
The compression ratio is 10 in the air standard Otto cycle. Pressure at the beginning of...
The compression ratio is 10 in the air standard Otto cycle.
Pressure at the beginning of the compression stroke is 1XY kPa and
the temperature is 15 ºC. The heat transfer to the air for each
cycle is 18XY kJ / kg air. Draw the T-s and P-v diagrams. (x=9
y=8).
Note: Accept that specific temperatures do not change with temperature. Take k = 1.4 and Cp = 1.0031 kJ / kg-K.
a)
For question 1, we draw the temperature...
An air-standard Otto cycle operates with a compression ratio of 8. At the start of the...
An air-standard Otto cycle operates with a compression ratio of
8. At the start of the compression stroke, the pressure is 15 psia
and the temperature is 80 degrees F. The maximum pressure in the
cycle is 550 psia. Find a) the thermal efficiency of the cycle, b)
the specific volume at the start of the compression stroke, c) the
specific volume at the end of the compression stroke, and d)
maximum temperature in the cycle.
The compression ratio of an air-standard Otto cycle is 9.5. Prior to the isentropic compression process,...
The compression ratio of an air-standard Otto cycle is 9.5.
Prior to the isentropic compression process, the air is at 100 kPa,
35°C and 600 cm3 . The temperature at the end of the isentropic
expansion process is 800 K. Using specific heat values at room
temperature (25°C), determine
(a) the highest temperature and pressure in the cycle
(b) the amount of heat transferred in during the cycle (kJ)
(c) the thermal efficiency
(d) the mean effective pressure
Part (a)...
Thermodynamics problem: An engine operates on an air-standard Otto cycle. The pressure and temperature of the...
Thermodynamics problem:
An engine operates on an air-standard Otto cycle. The pressure
and temperature of the isentropic compression 100 kPa and 40 °C,
respectively. The pressure at the end of compression is 2.0 MPa and
the net work is 87,000 J/mol. Assume ideal air-standard cycle.
Determine the following:
pressure, volume, and temperature at end of each step.
compression ratio.
heat input and heat rejected per mol of working fluid.
thermal efficiency of the cycle.
An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 7. At the
beginning of the compression process, air is at 98 kPa, 30oC and
766 kJ/kg of heat is transferred to air during the constant-volume
heat addition process. Determine (a) the pressure (p3) and
temperature (T3) at the end of the heat addition process, (b) the
net work output, (c) the thermal efficiency and (d) the mean
effective pressure for the cycle. Use the IG model
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8. At the
beginning of the compression process, air is at 95 kPa and 27°C,
and 900 kJ/kg of heat is transferred to air during the
constant-volume heat-addition process. Taking into account the
variation of specific heats with temperature, determine
(a) the pressure and temperature at the end of the
heat-addition process, (b) the net work output,
(c) the thermal efficiency, and (d) the mean
effective pressure for the cycle
An ideal Otto cycle has a compression ratio of 8.5 At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8.5 At the
beginning of the compression process, air is at 98 kPa and 27∘C, If
the Tmax cannot exceed 2300K and 3e-5 kg of. assuming constant
specific heats at ambient temperature, determine (a) the pressure
and temperature at the end of each process. (b) the net work
output, (c) the thermal efficiency, and (d) the mean effective
pressure for the cycle.
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8. At the
beginning of the compression process, air is at 95 kPa and 27°C,
and 730 kJ/kg of heat is transferred to air during the
constant-volume heat-addition process. Take into account the
variation of specific heats with temperature. The gas constant of
air is R = 0.287 kJ/kg·K.
Determine:
(a) the pressure and temperature at the end of the heat addition
process
(b) the net work output
(c) the thermal...
At the beginning of the compression process of an air standard Otto cycle, p1 = 1...
At the beginning of the compression process of an air standard
Otto cycle, p1 = 1 bar, T1
= 300 K. The maximum temperature in the cycle is 2250 K and
the compression ratio is 9.8. The engine has 4 cylinders and an
engine displacement of Vd = 2.0 L. Determine
per cylinder:
a) the volume at state 1.
b) the air mass per cycle.
c) the heat addition per cycle, in kJ.
d) the heat rejection per cycle, in
kJ.
e) the net work...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- 1.) Think back to August 6, 1945. The United States has just dropped an atomic weapon...
- Carry out the equipment and operating procedures between injection molding of thermoplastics and injection molding of...
- The cumulative timing approach was used to time a job and its elements. Use the following...
- absorption refection scattering refraction and diffraction can all have an impact on RF signal strength. Identify...
- This is my code I need to complete it? //The code package arraylists; import java.util.ArrayList; import...
- Organization management function at Tesla, and how can they improve the structure
- A company orders every 8 weeks. 52 weeks/8 weeks per order = 6.5 orders per year....
ADVERTISEMENT