Air within a piston–cylinder assembly, initially at 15 lbf/ in.2, 510°R, and a volume of 6...

Air within a piston–cylinder assembly, initially at 15 lbf/ in.², 510°R, and a volume of 6 ft³, is compressed isentropically to a final volume of 1.75 ft³.

Assuming the ideal gas model with k = 1.4 for the air, determine the:

(a) mass, in lb.

(b) final pressure, in lbf/in.²

(c) final temperature, in °R.

(d) work, in Btu.

Expert Solution

Amanda K answered 6 months ago

Steam, initially at 700 lbf/in.2, 550°F undergoes a polytropic process in a piston–cylinder assembly to a...

Steam, initially at 700 lbf/in.2, 550°F undergoes a polytropic process in a piston–cylinder assembly to a final pressure of 2200 lbf/in.2 Kinetic and potential energy effects are negligible. Determine the heat transfer, in Btu per lb of steam, for a polytropic exponent of 1.4, (a) using data from the steam tables. (b) assuming ideal gas behavior.

A piston–cylinder assembly contains 2 lb of water, initially at 100 lbf/in.2 and 600°F. The water...

A piston–cylinder assembly contains 2 lb of water, initially at 100 lbf/in.2 and 600°F. The water undergoes two processes in series: a constant-pressure process followed by a constant volume process. At the end of the constant-volume process, the temperature is 300°F and the water is a two-phase liquid–vapor mixture with a quality of 50%. Neglect kinetic and potential energy effects. Determine the work and heat transfer for each process, all in Btu.

A piston-cylinder assembly has initially a volume of 0.3 m3 of air at 25 oC. Mass...

A piston-cylinder assembly has initially a volume of 0.3 m3 of air at 25 oC. Mass of the air is 1 kg. Weights are put on the piston until the air reaches to 0.1 m3 and 1,000 oC, in which the air undergoes a polytropic process (PVn = const). Assume that heat loss from the cylinder, friction of piston, kinetic and potential effects are negligible. 1) Determine the polytropic constant n. 2) Determine the work transfer in kJ for this...

Seven lbm of ammonia in a piston-cylinder assembly, initially at p1 = 60 lbf/in2 and T1...

Seven lbm of ammonia in a piston-cylinder assembly, initially at p1 = 60 lbf/in2 and T1 = 120 (one hundred twenty) oF, undergoes an isobaric process to a final state. The work done on a system is 90 Btu. At the final state, determine the temperature (in oF) and the quality of ammonia.

A piston/cylinder system initially holds air at a pressure of 5.5 psig in a volume of...

A piston/cylinder system initially holds air at a pressure of 5.5 psig in a volume of 1 ft^3. The ambient pressure oitside the cylinder is 14.5 psia. The cylinder sits in an insulated bath containing 60 lbm of water. The contents are compressed to 100 psia. Intially they both have a temp of 50 F. After compression both air and water have a final temp of 51 F a) Find the mass of air in cylinder in lbm b) Hiw...

Air is contained in a piston-cylinder. Initially, the 0.35 kg of air is at 2 MPa...

Air is contained in a piston-cylinder. Initially, the 0.35 kg of air is at 2 MPa and 350°C. The air is first expanded isothermally to 500 kPa, then compressed polytropically with a polytropic exponent of 1.25 to the initial pressure, and finally compressed at the constant pressure to the initial state. Calculate the net heat transfer during the polytropic process in kJ assuming constant specific heats at 300 K (with 3 significant figures).

Air within a piston-cylinder assembly execute an ideal Carnot power cycle within maximum and minimum temperatures...

Air within a piston-cylinder assembly execute an ideal Carnot power cycle within maximum and minimum temperatures of 600 K and 300 k, respectively. The heat added at the high temperature is 250 kJ/kg. The lowest pressure in the cycle is 75 kPa. Assuming the ideal gas model for the air (constant cv, cp, k, with the following properties: kair = 1.4, cv,air = 0.717 J/g.K, Mair = 28.97 g/mol, Universal Gas Constant 8.314 /( . ) _ R = J...

A piston–cylinder assembly contains propane, initially at 27°C, 1 bar, and a volume of 0.1 m3....

A piston–cylinder assembly contains propane, initially at 27°C, 1 bar, and a volume of 0.1 m3. The propane undergoes a process to a final pressure of 4 bar, during which the pressure–volume relationship is pV1.1 = constant. For the propane, evaluate the work and heat transfer, each in kJ. Kinetic and potential energy effects can be ignored.

Air within a piston cylinder assembly executes a Carnot refrigeration cycle between hot and cold reservoirs...

Air within a piston cylinder assembly executes a Carnot refrigeration cycle between hot and cold reservoirs at TH=500 K and TC=300 K, respectively. The magnitude of the heat transfer rejected to the high temperature reservoir is 250 kJ per kg of air. The pressure at the start of the isothermal expansion is 325 kPa. The air can be modeled as an ideal gas with constant specific heat. For the air as a system, determine a. (5) the coefficient of performance....

Consider a piston cylinder device with a volume of 0.04 m3 and initially contains air at 293 K and 1 bar.

Consider a piston cylinder device with a volume of 0.04 m3 and initially contains air at 293 K and 1 bar. It is desired to reverse the cycle and use it as a refrigerator. In this case the process would begin with PV1.36 = constant process from an initial state of 293 K and a pressure of 10 Bars. The gas is allowed to expand to a volume 3.5 times the volume of state 1. It then follows a...

Question