A series RLC circuit connected to a 24-V AC source has a current of 150 mA...

A series RLC circuit connected to a 24-V AC source has a current of 150 mA when the AC source is set to 85 Hz. The voltage on the capacitor is measured to be 36 V. When the frequency of the source is adjusted in any way the current decreases. Calculate the values of R L, and C.

In P4, the frequency of the AC source is increased until the voltage on the capacitor has dropped to 12 V. Calculate the voltage on the inductor at this frequency

.

Expert Solution

genius_generous answered 8 months ago

A series RLC circuit is connected to a 240V AC generator that operates at 99Hz. In...

A series RLC circuit is connected to a 240V AC generator that operates at 99Hz. In the circuit, R = 4.325 kΩ and C = 0.71mF. You must have a circuit diagram, wherever necessary, to receive full credit on this question. (a) Determine the inductance, L, such that the current in the circuit is 19.1mA. (b) Using the value determined for L in part (a), determine the frequency at which the current in the circuit is maximized. What do physicists...

(Transient Current) An RLC series circuit has a voltage source given by E(t) = 20sin(t) V,...

(Transient Current) An RLC series circuit has a voltage source given by E(t) = 20sin(t) V, an inductor of 3 H, a resistor 6 Ω, and a capacitor of 1/3 F. Find the current I(t) in this circuit for t > 0 if I(0) = 2, I'(0) = 0. Find the moment of time when the transient current is equal to zero

I need to model a series RLC circuit with a AC voltage source using simulink which...

I need to model a series RLC circuit with a AC voltage source using simulink which measures current and voltage across each component. Please include the formulas your model is based off of. thanks. R = 1ohm L = 1 millhenery C = 1 microfarad

Consider an RLC circuit that is driven by an AC source with an adjustable frequency. Is...

Consider an RLC circuit that is driven by an AC source with an adjustable frequency. Is possible for the maximum voltage drop across the capacitor to exceed the maximum voltage? Explain in 100 words or less. I know the answer is yes, but can you explain this conceptually, not mathmatically? thanks.

An ac circuit has a resistance of 40 Ω connected in series to an inductor of...

An ac circuit has a resistance of 40 Ω connected in series to an inductor of inductive reactance equal to 30 Ω at a frequency of 50 Hz. Find the inductance of the inductor.

An RLC circuit consists of an AC voltage source with a maximum voltage of 122 Volts...

An RLC circuit consists of an AC voltage source with a maximum voltage of 122 Volts connected in series to a resistor, a capacitor, and an inductor. At the resonant frequency, the inductive reactance is 13 Ohms and the total impedance of the circuit is 23 Ohms. What is the average power produced by the battery at 2.6 times the resonant frequency in Watts?

An RLC circuit consists of an AC voltage source with a maximum voltage of 135 Volts...

An RLC circuit consists of an AC voltage source with a maximum voltage of 135 Volts connected in series to a resistor, a capacitor, and an inductor. At the resonant frequency, the inductive reactance is 15 Ohms and the total impedance of the circuit is 24 Ohms. What is the average power produced by the battery at 2.6 times the resonant frequency in Watts?

10.An AC voltage source is connected in series to an inductor, a capacitor, and a resistor...

10.An AC voltage source is connected in series to an inductor, a capacitor, and a resistor of 8 Ohms. At the frequency when the phase angle is zero, capacitive reactance is 7 Ohms. What is the phase angle between the current and voltage at a frequency which is a factor of 3.2 times less than this frequency? answer in degresss and if negative 6. the resistance of a coil spun in a generator is 2 Ohms. the coil is in...

Develop a series RLC circuit that increases the capacitor voltage to the source voltage as fast...

Develop a series RLC circuit that increases the capacitor voltage to the source voltage as fast as possible with no more than a 20% overshoot. The source voltage is 99V, the capacitance is 9F the and the inductance is 23 H. You can adjust the resistance since that the inductance are the two easiest parameters to adjust. I suggest you find ω0 for your circuit and the value of R that results in a critically damped circuit. Plot this vs....

A circuit has a 2.9 V battery connected in series with a switch. When the switch...

A circuit has a 2.9 V battery connected in series with a switch. When the switch is closed, the battery powers two paths in parallel, one of which has a resistor of resistance R1 = 80 Ω in series with an inductor of inductance L = 1×10−2 H , while the other has a resistor of resistance R2 = 230 Ω . What is the current supplied by the battery at a time t = 0.25 ms after the switch...

Question