Question
In: Electrical Engineering
Simulate a single phase to three phase converter. Show a) the circuit b) values used for...
Simulate a single phase to three phase converter. Show
a) the circuit
b) values used for each component
c) input and output waveform
d) explain how the circuit works
Solutions
Expert Solution
page no:1
simulink
model for (a) bit
Page no:2
input
waveform
Page no:3
Output
waveform
Page no:4
page
no:5
Order for this
Manojponduru answered 1 year agoRelated Solutions
Present the single-phase equivalent circuit of a synchronous generator.
Present the single-phase equivalent circuit of a synchronous
generator.
The single-phase equivalent-circuit parameters for a three-phase induction motor in ohms-per-phase are R1=0.17 R2=0.24 X1=1.05 X2=0.87...
The single-phase equivalent-circuit parameters for a three-phase
induction motor in ohms-per-phase are
R1=0.17 R2=0.24 X1=1.05
X2=0.87 Xm=82.1 Rc=435
For a slip of 5 percent, and a terminal voltage of 460 V, line
to line, calculate:
A) Calculate the motor phase current and input real and reactive
power.
B) Calculate the mechanical output power and the power
dissipated in the rotor. You might assume that the motor friction
and windage losses are 270W
C) Calculate the motor core loss and the...
The circuit shown in Fig. 4.17a is a precision differential voltage-gain device. It is used to provide a single-ended input for an analog-to-digital converter. We wish to derive an expression for the output of the circuit in terms of the two inputs.
The circuit shown in Fig. 4.17a is a precision differential voltage-gain device. It is used to provide a single-ended input for an analog-to-digital converter. We wish to derive an expression for the output of the circuit in terms of the two inputs.
Three single-phase transformers are used in a Y-Y configuration to supply a load rated 4000 V,...
Three single-phase transformers are used in a Y-Y configuration
to supply a load rated 4000 V, and drawing 80 kW at a power factor
of 0.72 (lagging), independently of the voltage. Each transformer,
rated 14500/2300 V, 40 kVA, has the following parameters in pu:
series elements: 0.01 (resistive), 0.06 (inductive); magnetizing
branch: 70 (resistive), 20 (inductive).
(a) Assume the transformer is ideal and the phase voltage at the
primary is 13000 V. Draw the per phase equivalent circuit of the...
A single-phase transformer of 3 kVA, 60 Hz, has a voltage ratio on open circuit of...
A single-phase transformer of 3 kVA, 60 Hz, has
a voltage ratio on open circuit of 240 / 120 V.
The primary and secondary resistances are 0.25 Ω
and 0.05 Ω respectively, the corresponding leakage
reactance being 0.75 Ω and 0.18
Ω. The transformer delivers current to the load at a 0.9
power factor lagging.
Determine the voltage across the
load.
Determine the power dissipated by the
load.
Determine percentage voltage regulation referred to the
secondary...
Design a circuit that converts a sinusoidal wave with 480Vrms at 60Hz into a three-phase set...
Design a circuit that converts a sinusoidal wave with 480Vrms at
60Hz into a three-phase set of voltages with 400 Vrms (Phase
voltage) at 50 Hz. Suppose that this circuit is loaded with a
Y-connected RL- series load with R=50Ω and 50 mH per phase. Make
sure that the output THD is less than 5%. Verify your results with
simulations. Estimate the power output with simulations in
simulink.
Your lab partner builds a circuit with a single battery, three identical bulbs, and a single...
Your lab partner builds a circuit with a single battery, three
identical bulbs, and a single switch. You can see the bulbs but not
the wiring of the circuit. With the switch closed, bulbs A and B
are equally bright, and bulb C is not lit at all. When the switch
is opened, the brightness of bulb A does not change, the brightness
of bulb B decreases, and bulb C "turns on". Now (with the switch
open), bulb A is...
Electric Machinery What are the advantages of using three-phase induction motor as compared to single phase...
Electric Machinery
What are the advantages of using three-phase induction
motor as compared to single phase induction motors?
please write it with long details and with clear written
- Single phase controlled bridge type rectifier circuits; a. Drawing circuit shapes, input voltage and wave...
- Single phase controlled bridge type rectifier circuits;
a. Drawing circuit shapes, input voltage and wave current of load
current and load voltage at pure resistive load
Explain in the angular velocity axis. (10 points)
b. Prove mathematically how load voltage values are calculated, (10
points)
c. How the output waveforms will be affected if the R-L charge
feeds instead of the pure resistive charge, and
you explain the reasons for this with waveforms and mathematically.
(10 points)
The terminal voltage across a single phase of a stepper motor used as a generator is...
The terminal voltage across a single phase of a stepper motor
used as a generator is applied across a load resistor of 33 ohms.
This terminal voltage has an amplitude of 18.7V and a frequency of
242 Hz. From a previous measurement, we know that this stepper
motor phase has an internal resistance of 11.2 ohms. What is the
time-averaged power delivered to the load? What is the electrical
efficiency of this circuit? Write down an expression for the
instantaneous...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- For Questions 1-3: consider the following code: public class A { private int number; protected String...
- You are tasked with assessing the health department’s intervention program in preventing recurrence of acute alcohol...
- Compare the MOSFET, JFET , and BJT and identify the reasons these devices behave differently. What...
- How would you use SAS Enterprise Miner to create a neural network model of your example?
- Explain the use of neural networking modeling in predictive analytics.
- Current Market Mix of Netflix, as detail as possible, please.
- This is all one question, thank you so much in advance! You must evaluate a proposal...
ADVERTISEMENT