A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated...

A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated vapor and 6.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored.

Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.

Expert Solution

samet mamat answered 2 years ago

Problem 3.034 A closed, rigid tank is filled with water. Initially, the tank holds 0.4 lb...

Problem 3.034 A closed, rigid tank is filled with water. Initially, the tank holds 0.4 lb of saturated vapor and 4.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored. Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The...

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The tank is heated until the water reaches 290 °F. Find the initial and final pressure, in lbf/in2 . Sketch the process on P-υ and T-υ diagrams (be sure to include the vapor dome, constant temperature and pressure lines, number your states, and indicate the process direction with an arrow). Thermodynamic

A closed, rigid, 0.40 m3 tank is filled with 15 kg of water. The initial pressure...

A closed, rigid, 0.40 m3 tank is filled with 15 kg of water. The initial pressure is p1 = 20 bar. The water is cooled until the pressure is p2= 4 bar. Determine the initial quality, x1, and the heat transfer, in kJ.

A well-insulated rigid tank contains 3kg of saturated liquid vapour-mixture of water at 250kpa. Initially, three...

A well-insulated rigid tank contains 3kg of saturated liquid vapour-mixture of water at 250kpa. Initially, three quarters of the mass is in the liquid phase. An electric resistance heater placed in the tank is turned on and kept on until all the liquid in the tank is vaporizer. Assuming the surroundings to be 25 degrees Celsius and 100kpa Determine: a) The exergy destruction and b) The second law efficiency for the process.

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at...

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at 200oC, 1 bar. During an interval of 20 minutes, the paddle wheel transfers energy to the air at a rate of 1 kW. During this time interval, the air also receives energy by heat transfer at a rate of 0.5 kW. These are the only energy transfers. Assume the ideal gas model for the air, and no overall changes in kinetic or potential energy....

Water is contained in a closed, rigid, 0.2 m3 tank at an initial pressure of 5...

Water is contained in a closed, rigid, 0.2 m3 tank at an initial pressure of 5 bar and a quality of 50%. Heat transfer occurs until the tank contains only saturated vapor. Determine a)the final mass of vapor in the tank, in kg,b) the final pressure, in bar.

A 500 L rigid tank contains a saturated water mixture at 200 C as shown: the...

A 500 L rigid tank contains a saturated water mixture at 200 C as shown: the mixture is 40% liquid and 60% vapour by volume (State 1). A valve on top of the tank is opened, and saturated vapor is slowly withdrawn from the tank. Heat transfer occurs during this process such that the temperature in the tank remains constant. The valve is closed when 50 % of the initial mass is withdrawn from the tank (State 2) (a) Determine...

A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume...

A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume of the tank is 110 m3 and the temperature of the water in the tank is 115°C. In the tank, 70% of the mass is liquid and 30% of the mass is vapour. Please calculate the total mass of water in the tank.

A rigid tank with a volume of 20 litres initially contains water at 0.1 degree of...

A rigid tank with a volume of 20 litres initially contains water at 0.1 degree of dryness and a pressure of 175 KPA. A steam disposal Valve is located at the top of the tank. Adding heat and steam by throwing the final case degree of dryness 0.4 and pressure 150 kPa is desired to be made. How much mass is ejected and what is the entropy produced. Heat source temperature 1000 K.

A rigid tank of volume 0.3 m3 contains water initially at its critical point. The water...

A rigid tank of volume 0.3 m3 contains water initially at its critical point. The water is now cooled to 150°C a) What mass of water is in the tank? b) Has the average specific volume of this water changed during the cooling process? c) Find the mass of liquid water and the mass of water vapor in the tankat the end of the process. d) Find the volume of liquid water and the volume of water vapor in the...

Question