A rigid tank with a volume of 20 litres initially contains water at 0.1 degree of...

A rigid tank with a volume of 20 litres initially contains water at 0.1 degree of dryness and a pressure of 175 KPA. A steam disposal Valve is located at the top of the tank. Adding heat and steam by throwing the final case degree of dryness 0.4 and pressure 150 kPa is desired to be made. How much mass is ejected and what is the entropy produced. Heat source temperature 1000 K.

Expert Solution

samet mamat answered 1 year ago

A rigid tank of volume 0.3 m3 contains water initially at its critical point. The water...

A rigid tank of volume 0.3 m3 contains water initially at its critical point. The water is now cooled to 150°C a) What mass of water is in the tank? b) Has the average specific volume of this water changed during the cooling process? c) Find the mass of liquid water and the mass of water vapor in the tankat the end of the process. d) Find the volume of liquid water and the volume of water vapor in the...

A rigid tank contains hydrogen and has a volume of 4.1 ft3. It is initially at...

A rigid tank contains hydrogen and has a volume of 4.1 ft3. It is initially at 87°F and 1,072 psia. Hydrogen then leaks from the tank until it is 76°F and 158 psia. How much heat transfer occurred into the tank, in Btu. Answer negative if heat left the tank.

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The...

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The tank is heated until the water reaches 290 °F. Find the initial and final pressure, in lbf/in2 . Sketch the process on P-υ and T-υ diagrams (be sure to include the vapor dome, constant temperature and pressure lines, number your states, and indicate the process direction with an arrow). Thermodynamic

An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and...

An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and 313 K. The amount of paddle-wheel work done on the system is 200 kJ. Calculate the nearest value of entropy change a. 0.66 kJ/K b. 0.88 kJ/K c. None d. 0.44 kJ/K e. 0.33 kJ/K

A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume...

A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume of the tank is 110 m3 and the temperature of the water in the tank is 115°C. In the tank, 70% of the mass is liquid and 30% of the mass is vapour. Please calculate the total mass of water in the tank.

A holding tank with capacity 5000 litres initially contains 1500 litres of 25 mM NaCl solution....

A holding tank with capacity 5000 litres initially contains 1500 litres of 25 mM NaCl solution. a) What is the final concentration of NaCl (expressed in mM) if an additional 3000 litres of 25 mM NaCl solution is pumped into the tank? b) Instead of (a), if 3000 litres of water are added to the tank, what is the final concentration of NaCl (expressed in mM)? c) Instead of (a) or (b), if an additional 500 litres of 25 mM...

A tank contains 420 litres of a solution, with 20 kilograms of salt in the solution....

A tank contains 420 litres of a solution, with 20 kilograms of salt in the solution. A solution with a concentration of 57 kilograms per litre enters the tank at a rate of 7 litres per minute. The well-stirred solution flows out of the tank at the same rate. Determine the mathematical model that gives the function y(t), the number of kilograms of salt in the tank after t minutes

A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated...

A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated vapor and 6.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored. Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.

A 4,500 litre tank contains 2,500 litres of brine. There is 50 kg of salt initially...

A 4,500 litre tank contains 2,500 litres of brine. There is 50 kg of salt initially present. Pure water is being put into the tank at 20 litres/min. Brine solution is draining away at a rate of 15 litres/min. a)Create a mathematical model of the dissolved salt in the solution. Give amount of salt in terms of time (t). b)Calculate how much salt is in the system after 15 minutes. State all of the assumptions that you are using. c)Create...

A well-insulated rigid tank contains 3kg of saturated liquid vapour-mixture of water at 250kpa. Initially, three...

A well-insulated rigid tank contains 3kg of saturated liquid vapour-mixture of water at 250kpa. Initially, three quarters of the mass is in the liquid phase. An electric resistance heater placed in the tank is turned on and kept on until all the liquid in the tank is vaporizer. Assuming the surroundings to be 25 degrees Celsius and 100kpa Determine: a) The exergy destruction and b) The second law efficiency for the process.

Question