Question

In: Mechanical Engineering

Water is contained in a closed, rigid, 0.2 m3 tank at an initial pressure of 5...

Water is contained in a closed, rigid, 0.2 m3 tank at an initial pressure of 5 bar and a quality of 50%. Heat transfer occurs until the tank contains only saturated vapor. Determine a)the final mass of vapor in the tank, in kg,b) the final pressure, in bar.

Solutions

Expert Solution

samet mamat answered 2 years ago
Next > < Previous

Related Solutions

A closed, rigid, 0.40 m3 tank is filled with 15 kg of water. The initial pressure...
A closed, rigid, 0.40 m3 tank is filled with 15 kg of water. The initial pressure is p1 = 20 bar. The water is cooled until the pressure is p2= 4 bar. Determine the initial quality, x1, and the heat transfer, in kJ.
A 0.2 m3 rigid tank contains 5 kg of water (in any phase or phases) at...
A 0.2 m3 rigid tank contains 5 kg of water (in any phase or phases) at 600 kPa. Which of the following values is closest to the temperature of the water in the tank? a)159 ℃ b)389 c)381 d)246 e)152
Nitrogen gas is contained in a rigid 1-m3 tank, initially at 5 bar, 300 K. Heat...
Nitrogen gas is contained in a rigid 1-m3 tank, initially at 5 bar, 300 K. Heat transfer to the contents of the tank occurs until the temperature has increased to 400 K. During the process, a pressure-relief valve allows nitrogen to escape, maintaining constant pressure in the tank. Neglecting kinetic and potential energy effects, and using the ideal gas model with constant specific heats evaluated at 350 K, determine (a) the mass of nitrogen that escapes, in kg, and (b)...
A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated...
A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated vapor and 6.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored. Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.
An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and...
An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and 313 K. The amount of paddle-wheel work done on the system is 200 kJ. Calculate the nearest value of entropy change a. 0.66 kJ/K b. 0.88 kJ/K c. None d. 0.44 kJ/K e. 0.33 kJ/K
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04...
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04 m^3 at 500 K. A paddle wheel stirs the air and transfers energy to the air at a constant rate of 1 kW for 100s. The temperature of the air increases to 600 K. (a) What is the final pressure of the air (kPa) (b)Calculate the heat transfer (kJ) for the process (use a constant, average specific heat)
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04...
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04 m^3 at 500 K. A paddle wheel stirs the air and transfers energy to the air at a constant rate of 1 kW for 100s. The temperature of the air increases to 600 K. (a) What is the final pressure of the air (kPa) (b)Calculate the heat transfer (kJ) for the process (use a constant, average specific heat)
A mass of m=1kg of steam is contained in a closed rigid container. Initially the pressure...
A mass of m=1kg of steam is contained in a closed rigid container. Initially the pressure and temperature of the steam are: p1= 1.5 MPa and t1=240?C, respectively. Then the temperature drops to T2 =100?C as the result of heat transfer to the surroundings. Determine: a) quality of the steam at the end of the process, b) percentage of volume that is occupied by the saturated liquid at the final state, c) heat transfer with the surroundings per unit mass...
Five kilograms of water is contained in a rigid, 3 m3 vessel at P = 1...
Five kilograms of water is contained in a rigid, 3 m3 vessel at P = 1 bar. A. What is the temperature and physical state (liquid, vapor, or both liquid and vapor) of the water? B. What is the specific internal energy of the water in the vessel?
Problem 3.034 A closed, rigid tank is filled with water. Initially, the tank holds 0.4 lb...
Problem 3.034 A closed, rigid tank is filled with water. Initially, the tank holds 0.4 lb of saturated vapor and 4.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored.   Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT