A beam is embedded at the left end and free at the other end with a...

A beam is embedded at the left end and free at the other end with a constant loadw0=48EI uniformly distributed across its length. (6pts)

and L =1.

(a)Is this an initial value problem? Explain.

(b) Write and solve the beam deflection equation. Find the deflection when L=1/2

Expert Solution

A beam is embedded at the left end and free at the other end with a constant loadw0=48EI uniformly distributed across its length. (6pts) and L =1. (a)Is this an initial value problem? Explain. (b) Write and solve the beam deflection equation. Find the deflection when L=1/2

Colby Messinger answered 1 year ago

A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end.

A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end. A cable is connected from the right end of the beam to the wall, at an angle of 27 ° above the beam, as shown below. A 55 kg sign is hung 1.6 m from the left end of the beam.Part A - Find the tension in the cable.Part B - Find the horizontal force exerted on the wall by the hinge.Part...

hacking Embedded Operating Systems: The Hidden Threat EXPLAIN WINDOWS IoT (INTERNET OF THINGS) AND OTHER EMBEDDED...

hacking Embedded Operating Systems: The Hidden Threat EXPLAIN WINDOWS IoT (INTERNET OF THINGS) AND OTHER EMBEDDED SYSTEMS. WHAT ARE NIX EMBEDDED OPERATING SYSTEMS? HOW DO YOU PATCH EMBEDDED OPERATING SYSTEMS?.

Explain how to read the left and right radii of the circular curve of the beam...

Explain how to read the left and right radii of the circular curve of the beam of the electrons in such a way as to eliminate parallax. 2.What are the special characteristics of Helmholtz coils? Why are they used

A cantilever beam AB is 4 m long and is fully restrained at the left support...

A cantilever beam AB is 4 m long and is fully restrained at the left support A. The beam is loaded with a uniform load of 600 N/m over a length of 2 m from the free end together with a clockwise couple of magnitude 4800 N-m at the tip B. Determine the maximum moment. a. 3600 N-m b. 8400 N-m c. 1200 N-m d. 5200 N-m

5. Larry's Heart rate is 120bpm, left ventricular end-diastolic volume is 113mL and left ventricular end-systolic...

5. Larry's Heart rate is 120bpm, left ventricular end-diastolic volume is 113mL and left ventricular end-systolic volume is 9mL. What is Larry's Cardiac Output in L/min? a. 12.48 L/min b. 11.08L/min c. 1359mL/min d. 9.00L/min 3. Which receptors are responsible for short term regulation of MAP? a. Carotid Sinus Receptors Only b. Aortic Arch Receptors Only c. Central Chemorecptors Only d. A&B e. A&C f. B&C 2. Gases bind to...

The beam is fixed-supported at B and free at A. Find the function, in terms of x,...

The beam is fixed-supported at B and free at A. Find the function, in terms of x, for the internal shear force in the beam. Wo = 2 kip/ft P = 5 kip L = 8 ft Input the terms of the function for the internal shear force in the beam. The function has the form: ax2 + bx + c (Units: kips) Note that a, b and/or c may be 0. Round answers to the nearest tenth. Be sure to...

Enter the left end and right end of a range of integers. User chooses an integer...

Enter the left end and right end of a range of integers. User chooses an integer in that range. Computer makes a guess that equals the mid of the range. User gives a feedback for each guess: 1 for too big, 2 for too small and 3 for just right. When the feedback is 1 (too big), the computer throws away any integer that is bigger than guess. When the feedback is 2 (too small), the computer discards the integers...

Silver and Copper rods of equal areas are placed end to end with the free end...

Silver and Copper rods of equal areas are placed end to end with the free end of the silver rod in ice at 0.00 degrees Celsius and the free end of the copper rod in steam at 100. degrees Celsius. The Silver rod is 15.0 cm in length and the copper rod is 25.0 cm in length. a) What is the temperature of the junction between copper and sliver when they have come to equilibrium? b) How much ice (in...

one end of a uniform beam of mass 5 kg is mounted at the wall by...

one end of a uniform beam of mass 5 kg is mounted at the wall by hinges and the other end is held by a cable which is connected to the ceiling. The cable forms a 60 degree angle with the horizontal beam. Applying the equilibrium condition, find the force of tension at the cable and the vertical and horizontal components of the force of the hinge Fv and Fh on the beam and indicate their directions.

A 100 kg uniform beam is attached to a vertical wall at one end and is...

A 100 kg uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. Calculate the magnitude of the vertical component of the force that the wall exerts on the left end of the beam if the angle between the cable and horizontal is θ = 43°. The angle between the horizontal and the beam is 30 degrees.

Question