The beam is fixed-supported at B and free at A. Find the function, in terms of x,...

The beam is fixed-supported at B and free at A. Find the function, in terms of x, for the internal shear force in the beam.

W_o = 2 kip/ft

P = 5 kip

L = 8 ft

Input the terms of the function for the internal shear force in the beam. The function has the form: ax2 + bx + c (Units: kips)

Note that a, b and/or c may be 0.

Round answers to the nearest tenth.

Be sure to include the correct sign (+ or -).

Expert Solution

samet mamat answered 1 year ago

For the function y = -x2/3-x a) Find the slope of tangent at x=4 b) find...

For the function y = -x2/3-x a) Find the slope of tangent at x=4 b) find y''

You are analyzing a 40 FT long simply supported beam (b = 10 IN, d =...

You are analyzing a 40 FT long simply supported beam (b = 10 IN, d = 21.5 IN, h = 24 IN) in an existing building. The dead load on this beam is 1.2 KLF and you are tasked with deciding whether a load of 2 KLF of live load can be applied in addition. Based on the original plans, you think that the compressive strength of the concrete f’c = 3000 PSI and the yield strength of the rebar...

A beam 3m long is simply supported at its ends. The beam is loaded with a...

A beam 3m long is simply supported at its ends. The beam is loaded with a downward vertical load of 200N at a point 2m from the left support. USING AMM. a.) The maximum deflection is located at what distance from the left support? Answer: 1.63m b.) Calculate the maximum deflection assuming E = 50 GPa and I = 1x10^6 mm4 Answer 2.9mm

Consider a concrete beam in an interior environment as follows: a. The beam is simply supported...

Consider a concrete beam in an interior environment as follows: a. The beam is simply supported with a design span of 4.8 metres. b. The dead load in the beam is uniformly distributed. c. Dead load on the beam, in addition to its own weight, is 6.9 KN/m of which 75% is permanent (long term). d. The beam carries a single concentrated live load at mid-span of 70 KN. e. 20% of the live load is considered short term. f....

A beam 3m long is simply supported at its ends. The beam is loaded with a...

A beam 3m long is simply supported at its ends. The beam is loaded with a downward vertical load of 200N at a point 2m from the left support. Using DIM: a. The maximum deflection is located at what distance from the left support? b. Calculate the maximum deflection assuming E = 50 GPa and I = 1x10^6 mm4

(a) Find the demand for y in terms of just prices using the utility function U(x,...

(a) Find the demand for y in terms of just prices using the utility function U(x, y) = [x^2 + y^2 ]^1/2 . (b) Is y an inferior or normal good? (c) Are x and y substitutes or complements? (d) Let Px = 1 and Py = 2. What is the price elasticity of demand for y at equilibrium? (e) Find the cross price elasticity of demand for y. (Hint: Use Px as your cross price.)

Question

The beam is fixed-supported at B and free at A. Find the function, in terms of x,...

Solutions

Expert Solution

Related Solutions

For the function y = -x2/3-x a) Find the slope of tangent at x=4 b) find...

You are analyzing a 40 FT long simply supported beam (b = 10 IN, d =...

A beam 3m long is simply supported at its ends. The beam is loaded with a...

Consider a concrete beam in an interior environment as follows: a. The beam is simply supported...

A beam 3m long is simply supported at its ends. The beam is loaded with a...

(a) Find the demand for y in terms of just prices using the utility function U(x,...

1) Find the Taylor series (to second order terms) of the function f(x,y) = x^2 −4x...

Find a, b, c, and d such that the cubic function f(x) = ax3 + bx2...

Find a, b, c, and d such that the cubic function f(x) = ax3 + bx2...

Find a, b, c, and d such that the cubic function f(x) = ax3 + bx2...