Question
In: Civil Engineering
A cantilever beam AB is 4 m long and is fully restrained at the left support...
A cantilever beam AB is 4 m long and is fully restrained at the left support A. The beam is loaded with a uniform load of 600 N/m over a length of 2 m from the free end together with a clockwise couple of magnitude 4800 N-m at the tip B. Determine the maximum moment.
|
a. 3600 N-m |
||
|
b. 8400 N-m |
||
|
c. 1200 N-m |
||
|
d. 5200 N-m |
Solutions
Expert Solution
. I'm really sorry for the
small disturbances in the calculation. I hope that you understand
the concept. If you understand the solution please like my solution
and support me. If you have any doubts please put a comment. Thank
you
Ally Wells answered 1 year agoRelated Solutions
A cantilever beam 4m long carries a uniform load of 3.5 kN/m over a portion 1.5m...
A cantilever beam 4m long carries a uniform load of 3.5 kN/m
over a portion 1.5m from the free end. E = 200 GPa and I = 30 x
10^6 mm^4
Using Area Moment Method
a. Determine the rotation at the free end.
b. Determine the deflection at the free end
A simply supported beam of length 7m has a concentrated couple
Mo of 10kNm (Counterclockwise) applied at one end.
Using Double Integration Method
The maximum deflection is located at...
A cantilever beam 4m long carries a uniform load of 3.5 kN/m over a portion 1.5m...
A cantilever beam 4m long carries a uniform load of 3.5 kN/m
over a portion 1.5m from the free end. E = 200 GPa and I = 30 x
10^6 mm4
Using AMM (Area Moment Method):
Determine the rotation at the free end.
Determine the deflection at the free end.
Select a 12 ft cantilever beam with p = 0.012, to support a dead load of...
Select a 12 ft cantilever beam with p = 0.012, to
support a dead load of 2k/f (including self weight) and Live load
of 3 k/ft. fy= 60000 psi, fc'= 3500 psi (hint your answer should be
Width = XXXX, Effective depth= XXXXX, Area of reinforcement =
XXXXX)
A beam extends over a span of 7.3 m and an overhang (cantilever) to the right...
A beam extends over a span of 7.3 m and an overhang (cantilever)
to the right of the right support of 3 m (that is, the total length
of the beam is 10.3 m.) The beam supports a service dead load of 18
t/m that does not include self-weight, and a service live load of
10 t/m. Assume the connection between the beam and the support is a
simple pin or roller.
. If self-weight is 1.512 , the height(h)...
Q6: A cantilever beam having span ‘L’ m was subjected to a uniformly distributed load of...
Q6: A
cantilever beam having span ‘L’ m was subjected to a uniformly
distributed load of
magnitude 8 kN/m for a distance of ‘0.6 L’ from the free end and
two concentrated loads one of
magnitude 15 kN at a distance ‘0.25 L’ m from the free end while
the other of magnitude ‘22’ kN at
a distance ‘0.6 L’ m from the free end respectively. It was
observed that the maximum bending
moment acting on the beam is equal...
Q1: A cantilever beam having span ‘L’ m was subjected to a uniformly distributed load of...
Q1: A cantilever beam having span ‘L’ m was subjected
to a uniformly distributed load of
magnitude 8 kN/m for a distance of ‘0.6 L’ from the free end and
two concentrated loads one of
magnitude 15 kN at a distance ‘0.25 L’ m from the free end while
the other of magnitude ‘22’ kN at
a distance ‘0.6 L’ m from the free end respectively. It was
observed that the maximum bending
moment acting on the beam is equal...
A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end.
A horizontal 14.9 kg beam 2.1 m long is attached to
the wall by a hinge at its left end. A cable is connected from the
right end of the beam to the wall, at an angle of 27 °
above the beam, as shown below. A 55 kg sign is hung 1.6
m from the left end of the beam.Part A - Find the tension in the cable.Part B - Find the horizontal force exerted on the wall by the
hinge.Part...
A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam...
A uniform beam is 5.00 m long and has a mass of 53.0 kg. The
beam is supported in a horizontal position by a hinge and a cable,
with angle ? = 115°.
(a) Draw all the forces acting on the beam.
(b) Label the axis of rotation and the position vectors of each
point of action.
(c) What is the tension on the cable?
(d) What are the magnitude of the vertical and horizontal forces
acting on the hinge?...
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm...
1. A 3.5 m clear span singly reinforced cantilever
beam has a rectangular section of b=300mm and D=500
mm is reinforced with 2 bars of 32 mm diameter and 1 bar of 25mm
diameter in the tension zone. The
live load taken by the beam is 19 kN/m. Check if the beam is safe
to carry the above load . Use M25
and Fe500.
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm...
1. A 3.5 m clear span singly reinforced cantilever
beam has a rectangular section of b=300mm and D=500
mm is reinforced with 2 bars of 32 mm diameter and 1 bar of 25mm
diameter in the tension zone. The
live load taken by the beam is 19 kN/m. Check if the beam is safe
to carry the above load . Use M25
and Fe500.
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- What are the SHDN, LNA in opamp What are the TXCO coding algorithm for binary and...
- Need to program a maze traversal program using dynamic array and stacks. The problem is faced...
- what were some of Ida B Wells significant contributions to the civil rights movement?
- In 2007, there were many people in Sri Lanka who have an opinion that the government...
- Example #2: Write the following set of four linear equations with 4 unknowns x1, x2, x3,...
- "In the digital age, our personal and collective privacy is threatened like it never has been...
- when i type those python code below, i got True, but when i type not a...
ADVERTISEMENT