Consider a compressor in which air enters at 1 bar, 27°C and exits at 3.5 bar,...

Consider a compressor in which air enters at 1 bar, 27°C and exits at 3.5 bar, 127°C. The work required is 127 kJ/kg of air flowing through the compressor. Heat transfer between the compressor and environment occurs at 27°C.

Determine

(a) the heat transfer, in kJ/kg

(b) the entropy generation rate, in kJ/kg.K, for the compressor as a control volume

(d) the entropy generation rate, in kJ/kg.K, for the environment alone.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

Air enters a compressor at 20 oC and atmospheric pressure, and exits at 200 oC and...

Air enters a compressor at 20 oC and atmospheric pressure, and exits at 200 oC and 0.8 MPa. The output stream flows at a linear velocity of 2 m/s, through an exit diameter of 10 cm. What is the power input to the compressor? (Answer: 16.7 kW)

Refrigerant 134a enters an air conditioner compressor at 4 bar, 20°C, and is compressed at steady...

Refrigerant 134a enters an air conditioner compressor at 4 bar, 20°C, and is compressed at steady state to 12 bar, 80°C. The volumetric flow rate of the refrigerant entering is 7.5 m3/min. The work input to the compressor is 112.5 kJ per kg of refrigerant flowing. Neglecting kinetic and potential energy effects, determine the magnitude of the heat transfer rate from the compressor, in kW.

1) In an air-standard Brayton cycle, the air enters the compressor at 0.1 MPa and 15?C....

1) In an air-standard Brayton cycle, the air enters the compressor at 0.1 MPa and 15?C. The pressure leaving the compressor is 1.0 MPa, and the maximum temperature in the cycle is 1100?C. Determine The pressure and temperature at each point in the cycle. The compressor work, turbine work, and cycle efficiency. For each control volume analysed, the model is ideal gas with constant specific heat at 300 K, and each process is steady state with no kinetic or potential...

Air enters a compressor operating at steady state at 1.05 bar, 300 K, with a volumetric...

Air enters a compressor operating at steady state at 1.05 bar, 300 K, with a volumetric flow rate of 48 m3/min and exits at 12 bar, 400 K. Heat transfer occurs at a rate of 8 kW from the compressor to its surroundings. Assuming the ideal gas model for air and neglecting kinetic and potential energy effects, determine the power input, in kW.

. In a gas turbine plant, air enters a compressor at atmospheric conditions of 15 ?C,...

. In a gas turbine plant, air enters a compressor at atmospheric conditions of 15 ?C, 1.0133 bar and is compressed through a pressure ratio of 10. The air leaving the compressor passes through a heat exchanger before entering the combustion chamber. The hot gases leave the combustion chamber at 800 ?C and expand through an HP turbine which drives the compressor. On leaving the HP turbine the gases pass through a reheat combustion chamber which raises the temperature of...

An air compressor is operating at a steady state. The air enters at with a volumetric...

An air compressor is operating at a steady state. The air enters at with a volumetric flow rate 1.2 m^3/s at 170 kPa and 22 degrees celsius with negligible velocity and leaves at 1500 kPa with velocity of 200 m/s. The power to the compressor is 60 kW and the compressor is cooled at a rate of 15 kJ/kg. Determine the exit area.

Air enters the compressor of an ideal gas refrigeration cycle at 17°C and 35 kPa and...

Air enters the compressor of an ideal gas refrigeration cycle at 17°C and 35 kPa and the turbine at 47°C and 160 kPa. The mass flow rate of air through the cycle is 0.3 kg/s. Assume variable specific heats for air. Determine the net power input. The net power input is kW.

Air enters a counterflow heat exchanger operating at steady state at 22°C, 0.1 MPa and exits...

Air enters a counterflow heat exchanger operating at steady state at 22°C, 0.1 MPa and exits at 7°C. Refrigerant 134a enters at 0.2 MPa, a quality of 0.33, and a mass flow rate of 30 kg/h. Refrigerant exits at 0°C. There is no significant change in pressure for either stream. (a) For the Refrigerant 134a stream, determine the rate of heat transfer, in kJ/h (b) For the refrigerant stream evaluate the change in flow exergy rate, in kJ/h. (c) For...

Air enters a food dehydration system at condition 1 and exits at condition 2. What is...

Air enters a food dehydration system at condition 1 and exits at condition 2. What is the change in enthalpy (kJ/kg dry air) of the air as it passes through the system: Condition 1: Tdb = 30C; Twb = 15C. Condition 2: Tdb = 100C; Twb = 40C. Select the closest answer.

An adiabatic air compressor with inlet conditions of 100 kPa, 27 C and an exit pressure...

An adiabatic air compressor with inlet conditions of 100 kPa, 27 C and an exit pressure of 500 kPa has an inlet volume flow rate of 5 m3/s and operates in steady flow. Calculate the minimum power required to drive the compressor.

Subjects