Consider two production lines with fraction of nonconformities in accordance with LSL, USL. Production Line 1...

Consider two production lines with fraction of nonconformities in accordance with LSL, USL.

Production Line 1

P1=0.2

Production Line 2

P2=0.2

Consider Production Line 1, Nonconformities occur in productions according to a Poisson distribution. A random sample of 100 products contains a total of 11 nonconformities. Do Hypothesis test for Lambda equal 15% at Alpha 1%?

Expert Solution

orchestra answered 1 year ago

A manufacturing company operates two production lines.when both lines are operating,the production rate on each line...

A manufacturing company operates two production lines.when both lines are operating,the production rate on each line is 500 units per hour.At this production rate on each line is 500 per hour.At this production rate the failure rate of line 1 is 3 failures per 8-hr day(CFR) and the failure rate of line 2 is 2 failures per 8-hr day.when one line fails.the production rate of the second line must be increased in order to make production quotas.At the increased rate...

A product is being assembled and packaged on three production lines (line A, line B, and...

A product is being assembled and packaged on three production lines (line A, line B, and line C). Each day, the quality control team selects a production line and inspects a batch chosen at random from the output of the selected production line. Line A is selected with probability .5, line B is selected with probability .2, and line C is selected with probability .3. The probability that no defects will be found in a batch selected from line A...

1.A manufacturer of mountaineering equipment produces traditional three-strand climbing rope on two separate production lines, line...

1.A manufacturer of mountaineering equipment produces traditional three-strand climbing rope on two separate production lines, line 1 and line 2. The manufacturer regularly tests the tensile strength of its ropes by randomly selecting ropes from production and subjecting them to various tests. The results from the most recent random sample of ropes are shown below. Assuming the population of tensile strengths for each line is approximately normally distributed with equal variances, can the manufacturer conclude there is a difference between...

1). Consider a transmission line made of a conductor with length l, the lines are made...

1). Consider a transmission line made of a conductor with length l, the lines are made of conductor with resistance per unit length R, inductance per unit length L, between the two lines is dielectric material with conductance per unit length Gand capacitance per unit length C. (a) Derive transmission line equations (telegrapher’s equations) for the phasors of the voltage difference and current in the transmission line. Explain the meaning of the spatial coordinate clearly. (b) Write down the general...

Conduct performance management in accordance with organisational protocolsand time lines?

Consider two identical generating units with equal (4 %) speed-droop that operate in parallel in accordance...

Consider two identical generating units with equal (4 %) speed-droop that operate in parallel in accordance with the frequency-load characteristics as shown below. (a) If both units are set to operate on curve A and the total load is equal to 100 % of the rating of one unit, what percentage of rated kW output is each unit supplying and what is the frequency of the common busbar? (b) Repeat (a) if the total load is equal to 200 %...

The Alternate Interior Theorem states that if two lines cut by a transversal line have a...

The Alternate Interior Theorem states that if two lines cut by a transversal line have a pair of congruent alternate interior angles, then they must be parallel. Prove this theorem in Neutral Geometry (first 4 axioms) in two ways 1) using the exterior angle theorem 2) then without. Hint: use proof by contradiction for both solutions.

A paper manufacturer uses 3 different automated production lines to produce its’ product. Each line was...

A paper manufacturer uses 3 different automated production lines to produce its’ product. Each line was installed at different times as the business grew. The business started with the first machine in 2005, the 2nd line was added in 2010, and the 3rd line was installed in 2015. Each line operates 24 hours/day, 7 days/week and are only down when switching between types of paper, clearing jams, and performing routine maintenance. Because of their age differences each line has a...

Consider a production line with five stations. Station 1 can produce a unit in 9 minutes....

Consider a production line with five stations. Station 1 can produce a unit in 9 minutes. Station 2 can produce a unit in 10 minutes. Station 3 has two identical machines, each of which can process a unit in 12 minutes (each unit only needs to be processed on one of the two machines. Station 4 can produce a unit in 5 minutes. Station 5 can produce a unit in 8 minutes. Which station is the bottleneck station?

Consider a peptide with the sequence TEYR. 1.) Calculate the fraction of the peptide with all...

Consider a peptide with the sequence TEYR. 1.) Calculate the fraction of the peptide with all titratable groups protonated at pH 4. 2.) Calculate the pI of the peptide. Please show exactly how you come to your conclusion so I can understand how to properly do this. Thumbs up given to correct answers.

Question