Question

In: Electrical Engineering

1). Consider a transmission line made of a conductor with length l, the lines are made...

1). Consider a transmission line made of a conductor with length l, the lines are made of conductor with resistance per unit length R, inductance per unit length L, between the two lines is dielectric material with conductance per unit length Gand capacitance per unit length C. (a) Derive transmission line equations (telegrapher’s equations) for the phasors of the voltage difference and current in the transmission line. Explain the meaning of the spatial coordinate clearly. (b) Write down the general solution of the equation derived in (a). (c) Calculate the intrinsic impedance of the transmission line.

Solutions

Expert Solution


Related Solutions

Derive the input impedance of the transmission line of Z0, length ‘l’ and terminated with Zl.
Derive the input impedance of the transmission line of Z0, length ‘l’ and terminated with Zl.
A constant pitch helical coil is made from a length L=7m of round conductor having a...
A constant pitch helical coil is made from a length L=7m of round conductor having a copper core with diameter d=0.1mm and covered with an insulation of thickness t=0.02m, by winding the conductor on a mandrel having a length Lm=120mm and a diameter dm=3mm and allowing equal leads for connection at the two ends, each with a length l=10mm Calculate the coil DC resistance if the electrical resistivity of copper is 1.72 µΩcm [marks 2] Calculate the coil inductance [marks...
A coaxial air transmission line has a solid conductor with a radius a on the inside...
A coaxial air transmission line has a solid conductor with a radius a on the inside and a very fine conductor with an inner radius on the outside. The conductors of this L-length coaxial transmission line include a lossy dielectric with electrical permeability E1, conductivity o1 and magnetic permeability u0 in the region a<r <c, and a lossy dielectric with electrical permeability E2, conductivity o2 and magnetic permeability u0 in the region of c <r <b. According to this, a)...
A lossless transmission line of length l=0.4? is terminated with a complex load impedance Z_L=60+j50 ?...
A lossless transmission line of length l=0.4? is terminated with a complex load impedance Z_L=60+j50 ? and characteristic impedance (Z_0=50 ?). Use Smith Chart to find: The VSWR on the line; The reflection coefficient at the load and its phase angle; The load admittance of the line Y_L in S; The input impedance of the line in ?; The distance to the first voltage minimum from the load in ?; and The distance to the first voltage maximum from the...
A new electricity transmission line is planned to supply an outlying area and two different conductor...
A new electricity transmission line is planned to supply an outlying area and two different conductor sizes are being considered. The capital cost of the line is estimated at $15,600,000 for conductor A and $18,700,000 for conductor B. The energy losses in the line in the first year are estimated at $146,000 for conductor A and $75,000 for conductor B. If conductor A is used the load capacity of the line will be reached in 13 years. The line will...
Transmission lines theory", explain with it; transmission lines effects and their causes,
Transmission lines theory", explain with it; transmission lines effects and their causes,
1.(a) Show that the length of the broken line satisfies Length(L) ≥ |AB|. (b) Show that...
1.(a) Show that the length of the broken line satisfies Length(L) ≥ |AB|. (b) Show that L achieves the lower bound Length(L) = |AB| if and only if the vertices V1,...,Vk−1 all lie on the segment AB and appear in that orderonAB,i.e.,theysatisfyVi ∈Vi−1Vi+1 forall1≤i≤k−1.
An input transmission line of characteristic impedance Z01 splits off into three identical output transmission lines...
An input transmission line of characteristic impedance Z01 splits off into three identical output transmission lines having characteristic impedance Z02 = 3Z01. This represents a four-port system. Find all 16 of the S parameters for this system. Note: Many of the 16 Sij parameters will be identical. There should be only four values that are distinct. SHOW WORK!!
Q \  What are transmission lines and what are the effects and causes of transmission lines, then...
Q \  What are transmission lines and what are the effects and causes of transmission lines, then mention the difference between the spread of electromagnetic waves in transmission lines and spread in free space?
Assuming that the length of a lossless transmission line with the normalized load impedance of zL...
Assuming that the length of a lossless transmission line with the normalized load impedance of zL = ZL/Z0 = 1 + j1 is l = 2.25λz , there are a total of (A) 2 voltage maxima and 2 voltage minima (B) 2 voltage maxima and 3 voltage minima (C) 3 voltage maxima and 2 voltage minima (D) 4 voltage maxima and 4 voltage minima (E) 4 voltage maxima and 5 voltage minima (F) 5 voltage maxima and 4 voltage minima...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT