Question

In: Physics

An industrial CO2laser produces a beam of radiation with average power of 5.00 kW at a...

An industrial CO2laser produces a beam of radiation with average power of 5.00 kW at a wavelength of 10.6 m. Such a laser can be used to cut steel up to 25 mm thick! The laser light is polarized in the x-direction, travels in the positive z-direction, and is collimated (neither diverging or converging) at a constant diameter of 120 m. Calculate the amplitude of the oscillating magnetic field produced by the laser light.

Solutions

Expert Solution

We know that

Laser is a coherent electromagnetic wave and its intensity is given as:-

   ........ equ(1)

And

And

Intensity per second is given as:

  

Where. P= average power of beam

A= area of cross section of beam

From equ(1)

ANS


Related Solutions

A particular laser pointer emits a beam with an average power of 5.00 mW, and the...
A particular laser pointer emits a beam with an average power of 5.00 mW, and the beam has a circular cross-section with a diameter of 3.00 mm. The beam is linearly polarized. The average intensity of the light is 707.7 W/m2. Determine the following. (a) the amplitude of the oscillating electric field in the laser beam (V/m) (b) the amplitude of the oscillating magnetic field in the laser beam (T)
A small He-Ne laser produces a 632.8 nm beam with an average power of 3.5 mW...
A small He-Ne laser produces a 632.8 nm beam with an average power of 3.5 mW and diameter of 2.4mm a) How many photons per second are emitted by the laser? b) What is the amplitude of the electric field inside the beam? (Hint: You should consult your EP book, the internet, or equation 3.10 for this problem) c) How does this electric field compare with one produced by a 100W light bulb at a distance of 1 meter?
Lets say that we are testing an engine that produces 17 kW of power. As this...
Lets say that we are testing an engine that produces 17 kW of power. As this engine is operating, it absorbs 95 kW of heat from the surrounding air at 17 C. The air is then exited from a combustor into a room at 20 C. What is the reversible power? Group of answer choices -32.9 kW 32.9 kW 5.882 kW -5.882 kW
A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam...
A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam is supported in a horizontal position by a hinge and a cable, with angle ? = 115°. (a) Draw all the forces acting on the beam. (b) Label the axis of rotation and the position vectors of each point of action. (c) What is the tension on the cable? (d) What are the magnitude of the vertical and horizontal forces acting on the hinge?...
A pointer laser has an average output power of 0.9 mW and a beam diameter of...
A pointer laser has an average output power of 0.9 mW and a beam diameter of 1.2 mm. (a) What is the force exerted by the laser beam on a perfectly reflecting surface ? (b) Is this force much larger, smaller, or about the same compared to the weight of a 0.1 gram drop of water ( 1x10-4x9.8 = 9.8x10-4 Newton ) (c) What is the rms electric field produced by this laser ?
A laser emits a cylindrical beam of light 4.0 mm in diameter. The average power of...
A laser emits a cylindrical beam of light 4.0 mm in diameter. The average power of the laser is 2.8 mW . The laser shines its light on a perfectly absorbing surface. How much energy does the surface receive in 14 s ? What is the radiation pressure exerted by the beam?
A 100 kW, 8-cylinder R-22 compressor with 20 kW power operates at zero & 40 C...
A 100 kW, 8-cylinder R-22 compressor with 20 kW power operates at zero & 40 C evaporating & condensing temps. The compressor bore 0.07 m & stroke 0.06 m with clearance volume of 5% runs at 30 rev/sec. Determine: a. Draw the PH diagram indicating all enthalpy & sp. vol. b. Volumetric efficiency c. Suction volume, m3/s d. Piston displacement, m3/s e. Actual volumetric efficiency f. Actual work of compressor, kJ/kg g. Isentropic work of compression, kJ/kg h. Compression or...
Radiation Exposure from Dental X-rays Dental X-rays expose patients to about 5.00 μSv of radiation. 4th...
Radiation Exposure from Dental X-rays Dental X-rays expose patients to about 5.00 μSv of radiation. 4th attempt Part 1 (1 point)FeedbackSee HintSee Periodic Table Given an RBE of 1.00 for X-rays, how many micrograys of radiation does 5.00 μSv represent? ? μ Gy    Part 2 (1 point)FeedbackSee Hint For a 50.0 kg person, how much energy does 5.0 μSv correspond to? x 10 ? μ J   
A roller chain drive is to transmit a design power of 9.0 kW with the faster...
A roller chain drive is to transmit a design power of 9.0 kW with the faster shaft having a speed of 84 rpm. Select the most suitable chain size and type of lubrication from the following options if the pinion has 15 teeth: 1 - Pitch of 25.4 mm, oil bath or disc lubrication, 2 - Pitch of 19 mm, drip feed lubrication, 3 - Pitch of 25.4 mm, drip feed lubrication, 4 - Pitch of 19 mm, drip feed...
Air is expanded isentropically in an adiabatic turbine, to produce 135 kW of power. If the...
Air is expanded isentropically in an adiabatic turbine, to produce 135 kW of power. If the mass flow rate is 0.75 kg/s, and the air at the exit is 500 K and 305 kPa, then what is the temperature and pressure at the inlet of the turbine? (a) The temperature is K. (b) The pressure is kPa. NOTE: Do NOT approximate the air as having a constant specific heat.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT