A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam...

A uniform beam is 5.00 m long and has a mass of 53.0 kg. The beam is supported in a horizontal position by a hinge and a cable, with angle ? = 115°.

(a) Draw all the forces acting on the beam.

(b) Label the axis of rotation and the position vectors of each point of action.

(c) What is the tension on the cable?

(d) What are the magnitude of the vertical and horizontal forces acting on the hinge?

(e) What is the magnitude and direction of the torque exerted by the tension on the cable?

Expert Solution

Hey there Dear Respected student,I hope you're doing absolutely great, I'm too glad to answer such a nice question for you. I hope it helps you. I tried my best to provide you with a best quality answer for you . I tried to utilize my full time and knowledge for this question. Its quite easy and simple.. I believe that you will understand this in one read. Yes you can do this my dear . Please carefully go through answer till last word. And oh yes I appreciate your hunger of grabbing knowledge keep it always up like this.

So here is your answer :

Please Feel free to ask you doubts if any. Your suggestions are most welcomed.
Please appreciate my efforts and hardwork by upvote/thumbs up ? it will be really very helpful.

Thanks for your valuable time.
Thanks for choosing this platform. All the best for your future and career. Keep learning like this always. Stay safe stay healthy. Take a good care of yourself and family . Have a great life ahead

Thanks you so much :)

genius_generous answered 2 years ago

Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally...

Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally to a wall that can only support a vertical load ( The horizontal component of the force of the wall on the beam is identically zero). There is a chandelier (mass = 40 kg) hanging at a distance = 4.21 meter from the end of the beam that is attached to the wall. There is a vertical cable hanging down from the ceiling that...

Two people are carrying a uniform 3 m long steel beam that has a total mass...

Two people are carrying a uniform 3 m long steel beam that has a total mass of 32.1 kg. One person is supporting it at the far left end with an upward force of 120 N, while the second one is supporting it somewhere near the right end with an unknown force. How much force is required from the second person in order to balance the beam? H ow far from the right end must the second person lift in...

A uniform rod of length 2.00 m and mass 5.00 kg is suspended by two ropes...

A uniform rod of length 2.00 m and mass 5.00 kg is suspended by two ropes of negligible mass. The rope at the lower end is horizontal. The rope at the upper end makes an angle φ = 30.0◦ with the vertical. φ θ (a) Draw a free body diagram for the rod. (b) What is the tension in the upper rope? (c) What is the tension in the lower (horizontal) rope? (d) What is the angle θ the rod...

1. A uniform disk of mass M = 5.00 kg and radius r = 24.0 cm...

1. A uniform disk of mass M = 5.00 kg and radius r = 24.0 cm is mounted on a motor through its center. The motor accelerates the disk uniformly from rest by exerting a constant torque of 1.50 N · m. (a) What is the time required for the disk to reach an angular speed of 8.50 ✕ 102 rpm? (b) What is the number of revolutions through which the disk spins before reaching this angular speed? 2. A...

A uniform helicopter rotor blade is 8.97 m long, has a mass of 104 kg, and...

A uniform helicopter rotor blade is 8.97 m long, has a mass of 104 kg, and is attached to the rotor axle by a single bolt. (a) What is the magnitude of the force on the bolt from the axle when the rotor is turning at 329 rev/min? (Hint: For this calculation the blade can be considered to be a point mass at its center of mass. Why?) (b) Calculate the torque that must be applied to the rotor to...

A uniform steel beam of length 5.00 m has a weight of 4.50 ✕ 10^3 N....

A uniform steel beam of length 5.00 m has a weight of 4.50 ✕ 10^3 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the wall. The cable makes an angle of 25.0° above the horizontal. A load whose weight is 12.0 ✕ 10^3 N is hung from the beam at a point that...

A 3.20-m-long, 500 kg steel uniform beam extends horizontally from the point where it has been...

A 3.20-m-long, 500 kg steel uniform beam extends horizontally from the point where it has been bolted to the framework of a new building under construction. A 70 kg construction worker stands at the far end of the beam. What is the magnitude of the torque about the bolt due to the worker and the weight of the beam?

The 6.50 m long uniform ladder has a mass of 13.0 kg (weight: 130 N). Let...

The 6.50 m long uniform ladder has a mass of 13.0 kg (weight: 130 N). Let µs = 0.25 and µk = 0.20 A) BEFOREthe person climbs onto the ladder, it is placed against the wall and makes an angle of 59.49° with the floor. Does the ladder slip? SHOW WHY/WHY NOT B) Then the ladder is moved until it makes an angle of 53.13° with the floor. How far up the ladder can a 40.0 kg (400 N) person climb? C) For what range of...

one end of a uniform beam of mass 5 kg is mounted at the wall by...

one end of a uniform beam of mass 5 kg is mounted at the wall by hinges and the other end is held by a cable which is connected to the ceiling. The cable forms a 60 degree angle with the horizontal beam. Applying the equilibrium condition, find the force of tension at the cable and the vertical and horizontal components of the force of the hinge Fv and Fh on the beam and indicate their directions.

A uniform beam of mass MB = 0.8833 kg and length l = 0.8m is attached...

A uniform beam of mass MB = 0.8833 kg and length l = 0.8m is attached to a wall by a hinge at at one end and by a cord of negligible mass and length ls = 1.27 m that makes an angle ? with the horizontal at the other end (see figure drawn on the board), such that the beam is horizontal. A mass mH = 0.55 kg is hung from the beam at a distance lH = 0.6...

Question