Question 1. Samples of n = 4 items are taken from a process at regular intervals....

Question 1. Samples of n = 4 items are taken from a process at regular intervals. A normally distributed quality characteristic is measured and x-bar and s values are calculated at each sample. After 50 subgroups have been analyzed, we have

? x?_i = 1,000 and ? s_i = 72

(A) Compute the control limit for the x and s control charts

(B)Assume that all points on both charts plot within the control limits. What are the natural tolerance limits of the process?

(C) if the specifications limits are 19 + 4.0 what are your conclusions regarding the ability of the process to produce items conforming to specifications?

(D) Assuming that if an item exceeds the upper specification limit it can be reworked, and if it is below the lower specification limit it must be scrapped, what percentage scrap and rework is the process now producing?

(E) If the process were centered at u = 19.0, what would be the effect on percentage scrap and rework?

Expert Solution

samet mamat answered 2 years ago

samples of n=4 items each are taken from a manufacturing process at regular intervals. a quality...

samples of n=4 items each are taken from a manufacturing process at regular intervals. a quality characteristic is measured, and x-bar and r values are calculated for each sample. after 25 samples, we have: x-bar = 107.5 r = 12.5 assume that the quality characteristic is normally distributed. a)compute control limits for the x-bar and r control charts b)estimate the process mean and standard deviation c)assuming that the process is in control, what are the natural tolerance limits of the...

Samples of n = 5 units are taken from a process every hour. The x-bar and...

Samples of n = 5 units are taken from a process every hour. The x-bar and R-bar values for a particular quality characteristic are determined. After 25 samples have been collected, we calculate x-bar = 20 and R-bar = 4.56. a) What are the three-sigma control limits for x-bar and R? b) Both charts exhibit control. Estimate the process standard deviation. c) Assume that the process output is normally distributed. If the specifications are 19 ± 5, what are your...

Five samples of size 4 were taken from a process. A range chart was developed that...

Five samples of size 4 were taken from a process. A range chart was developed that had LCLr = 0 and UCLr = 2.50. Similarly, an average chart was developed with the average range from the five samples, with LCLx = 15.0 and UCLX = 24.0. The ranges for each of the five samples were 1.75, 2.42, 2.75, 2.04, and 2.80, respectively. The values of the sample average for each sample were 19.5, 22.3, 17.4, 20.1, and 18.9, respectively. What...

Five samples of size 4 were taken from a process. Summary statistics are shown below: Sample...

Five samples of size 4 were taken from a process. Summary statistics are shown below: Sample Range Mean 1 1.75 10.5 2 2.42 22.3 3 2.75 17.4 4 2.04 20.1 5 2.80 18.9 What is the lower control limit for a range chart?

Samples of 36 parts are taken from a manufacturing process that produces machine parts with a...

Samples of 36 parts are taken from a manufacturing process that produces machine parts with a mean diameter of 12.40 cm and a standard deviation of 0.06 cm. If the diameters are normally distributed, what proportion of sample means will have diameters between 12.39 and 12.41 cm?

Mortgages, loans taken to purchase a property, involve regular payments at fixed intervals and are treated...

Mortgages, loans taken to purchase a property, involve regular payments at fixed intervals and are treated as reverse annuities. Mortgages are the reverse of annuities, because you get a lump-sum amount as a loan in the beginning, and then you make monthly payments to the lender. You’ve decided to buy a house that is valued at $1 million. You have $300,000 to use as a down payment on the house, and want to take out a mortgage for the remainder...

Suppose that independent samples ( of sizes n(i) ) are taken from each of k populations...

Suppose that independent samples ( of sizes n(i) ) are taken from each of k populations and that population (i) is normally distributed with mean mu(i) and variance sigma^2, i = 1, ..., k. That is, all populations are normally distributed with the same variance but with (possibly) different means. Let X(i)bar and s(i)^2, i = 1, ..., k be the respective sample means and variances. Let phi = c(1)mu(1) + c(2)mu(2) + ... + c(k)mu(k), where c(1), c(2), ...,...

Question 4 By utilising Annexure A, answer the following questions: (a) 15 samples of n =...

Question 4 By utilising Annexure A, answer the following questions: (a) 15 samples of n = 8 have been taken from a cleaning operation. The average sample range for the 20 samples was 0.016 minute, and the average mean was 3 minutes. Determine the three-sigma control limits for this process. (b) 15 samples of n = 10 observations have been taken from a milling process. The average sample range is 0.01 centimetres. Determine upper and lower control limits for sample...

Mortgage payments Mortgages, loans taken to purchase a property, involve regular payments at fixed intervals and...

Mortgage payments Mortgages, loans taken to purchase a property, involve regular payments at fixed intervals and are treated as reverse annuities. Mortgages are the reverse of annuities, because you get a lump-sum amount as a loan in the beginning, and then you make monthly payments to the lender. You’ve decided to buy a house that is valued at $1 million. You have $100,000 to use as a down payment on the house, and want to take out a mortgage for...

Twenty samples of n = 200 were taken by an operator at a workstation in a...

Twenty samples of n = 200 were taken by an operator at a workstation in a production process. The number of defective items in each sample were recorded as follows Sample number of defectives Sample number of defectives 1 12 11 16 2 18 12 14 3 10 13 12 4 14 14 16 5 16 15 18 6 19 16 20 7 17 17 18 8 12 18 20 9 11 19 21 10 14 20 22 1- develop...

Question