Three return steam lines in a chemical processing plant enter a collection tank operating at steady...

Three return steam lines in a chemical processing plant enter a collection tank operating at steady state at 5 bar. Steam enters inlet 1 with flow rate of 2 kg/s and quality of 0.9. Steam enters inlet 2 with flow rate of 2 kg/s at 200°C. Steam enters inlet 3 with flow rate of 1.2 kg/s at 95°C. Steam exits the tank at 5 bar. The rate of heat transfer from the collection tank is 40 kW. Neglecting kinetic and potential energy effects, determine for the steam exiting the tank:

(a) the mass flow rate, in kg/s.

(b) the temperature, in °C.

Expert Solution

samet mamat answered 2 years ago

An orange juice processing plant has three production lines. The production lines fill juice into 400...

An orange juice processing plant has three production lines. The production lines fill juice into 400 ml packages. The production manager of the plant would like to know if the production lines are all filling the packages the same amount. A sample of 25 packages from each production line are taken and the data is saved in juice.csv. The production manager would like to know: “are the three production lines filling packages with the same amount of juice, on average?”....

I have a statistics question: An orange juice processing plant has three production lines. The production...

I have a statistics question: An orange juice processing plant has three production lines. The production lines fill juice into 400 ml packages. The production manager of the plant would like to know if the production lines are all filling the packages the same amount. A sample of 25 packages from each production line are taken and the data is saved in juice.csv. The production manager would like to know: “are the three production lines filling packages with the same...

Consider a steam power plant operating on a simple ideal Rankine cycle in which the steam...

Consider a steam power plant operating on a simple ideal Rankine cycle in which the steam enters the turbine at 3 MPa and 350C and is condensed in the condenser at 75 kPa. Determine the thermal efficiency of this cycle and sketch an appropriately labeled T-s diagram. Also compare this thermal efficiency to that a Carnot heat engine operating between these same two limits. The change in enthalpy across the pump = work done by the pump: h2-h1= v1(P2– P1)

A food processing plant makes soup in a continuous process with a steady flow of product...

A food processing plant makes soup in a continuous process with a steady flow of product into and out of a large kettle. The soup is maintained at a certain temperature by heating the kettle with a coil of steam pipes. The large size of the kettle means the entering product remains in the kettle for a long time. Draw a graphic and describe how the plant could use feedback, feedforward, and cascade control to maintain a constant temperature. Which...

Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine...

Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine at 15 MPa and 600°C. The steam condenses in the condenser at 10 kPa. Use the EES software to study the effects of the following cases on the cycle performance and to sketch the T-s diagram for each case: Plot the variation of the cycle thermal efficiency with the turbine isentropic efficiency. Take the isentropic efficiency of the turbine in the range 70% to...

Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine...

Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine at 15 MPa and 600°C. The steam condenses in the condenser at 10 kPa. Use the EES software to study the effects of the following cases on the cycle performance and to sketch the T-s diagram for each case: #Plot the variation of the cycle thermal efficiency with the turbine isentropic efficiency. Take the isentropic efficiency of the turbine in the range 70% to...

Steam enters an adiabaticnozzle operating at steady state at 20 bar, 320°C, with a velocity of...

Steam enters an adiabaticnozzle operating at steady state at 20 bar, 320°C, with a velocity of 100 m/s. The exit pressure and temperature are 7 bar and 200°C, respectively. The mass flow rate is 5 kg/s. Neglecting potential energychanges, determine: a.the exit velocity, in m/s. b.the exit flow area, in cm2

Consider a steam power plant operating on the ideal reheat Rankine cycle. Steam enters the high-pressure...

Consider a steam power plant operating on the ideal reheat Rankine cycle. Steam enters the high-pressure turbine at PH MPa and TH °C and is condensed in the condenser at a pressure of PL kPa. Assume the steam is reheated to the inlet temperature of the high-pressure turbine, and that pump work is NOT negligible. If the moisture content of the steam at the exit of the low-pressure turbine is not to exceed w% percent, determine: (a) the pressure at...

Ideal Reheat Steam Cycle (10) Consider a steam power plant operating on the ideal reheat Rankine...

Ideal Reheat Steam Cycle (10) Consider a steam power plant operating on the ideal reheat Rankine cycle. Steam enters the high-pressure turbine at PH MPa and TH °C and is condensed in the condenser at a pressure of PL kPa. Assume the steam is reheated to the inlet temperature of the high-pressure turbine, and that pump work is NOT negligible. If the moisture content of the steam at the exit of the low-pressure turbine is not to exceed w% percent,...

a.) What is the thermal efficiency of a steam power plant operating on the Rankine cycle...

a.) What is the thermal efficiency of a steam power plant operating on the Rankine cycle if saturated steam is supplied to the turbine at 1000 psia, and the condenser is at 1 psia. Use a turbine efficiency of 95% and a pump efficiency of 85%. Refer to Chapter 9, Sections 10-11, as necessary. b.) Determine the thermal efficiency if the steam is superheated to 1000 F, assuming all else equal.

Question

Three return steam lines in a chemical processing plant enter a collection tank operating at steady...

Solutions

Expert Solution

Related Solutions

An orange juice processing plant has three production lines. The production lines fill juice into 400...

I have a statistics question: An orange juice processing plant has three production lines. The production...

Consider a steam power plant operating on a simple ideal Rankine cycle in which the steam...

A food processing plant makes soup in a continuous process with a steady flow of product...

Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine...

Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine...

Steam enters an adiabaticnozzle operating at steady state at 20 bar, 320°C, with a velocity of...

Consider a steam power plant operating on the ideal reheat Rankine cycle. Steam enters the high-pressure...

Ideal Reheat Steam Cycle (10) Consider a steam power plant operating on the ideal reheat Rankine...

a.) What is the thermal efficiency of a steam power plant operating on the Rankine cycle...