Question

In: Physics

Assume you are given two resistors with resistances R1=4.0 kΩ and R2=6.0 kΩ and two capacitors...

Assume you are given two resistors with resistances R1=4.0 kΩ and R2=6.0 kΩ and two capacitors with capacitances C1=4.0 µF and C2=6.0 µF.

a)      Calculate the equivalent resistances Req and the equivalent capacitance Ceq if the resistors are connected in series and the capacitors are connected in parallel.

b)      Now, use the Req and Ceq that you calculate in part (a) to construct an RC circuit. An emf of 27 V is applied across Req and Ceq to charge the capacitor. After Ceq is fully charged, the battery is removed at t=0. Calculate the potential difference across the Ceq after t= 12µs.

c)      If the resistor R1 is made of iron wire with radius R= 3 mm, calculate the length of this wire. The resistivity of iron is ρiron= 9.68x10-8 Ω.m.

d)      If the capacitance C2 has square parallel-plates with the area A = 20 cm2. Calculate the separation between plates.

Solutions

Expert Solution

genius_generous answered 2 years ago
Next > < Previous

Related Solutions

Assume you are given two resistors with resistances R1=4.0 kΩ and R2=6.0 kΩ and two capacitors...
Assume you are given two resistors with resistances R1=4.0 kΩ and R2=6.0 kΩ and two capacitors with capacitances C1=4.0 µF and C2=6.0 µF. a) Calculate the equivalent resistances Req and the equivalent capacitance Ceq if the resistors are connected in series and the capacitors are connected in parallel. b) Now, use the Req and Ceq that you calculate in part (a) to construct an RC circuit. If an emf of 27 V is suddenly applied across Req and Ceq, calculate...
Three resistors with resistances R1, R2, R3 are connected in parallel across a battery with voltage...
Three resistors with resistances R1, R2, R3 are connected in parallel across a battery with voltage V. By Ohm’s law, the current (amps) is I = V* [ (1/R1) + (1/R2) + (1/R3) ] Assume that R1, R2, R3, and V are independent random variables where R1 ~ Normal (m = 10 ohms, s = 1.5 ohm)             R2 ~ Normal (m = 15 ohms, s = 1.5 ohm)             R3 ~ Normal (m =20 ohms, s = 1.0 ohms)...
let r1 and r2 be the relations represented as r1 (ABC) and r2 (ADE) .Assume the...
let r1 and r2 be the relations represented as r1 (ABC) and r2 (ADE) .Assume the corresponding domains of both the tables are same.r1 has 2000 tuples and r2 has 4500 tuples 1.common tuples between r1 and r2 are 500, what would be the resultant number of tuples for r1-r2, justify your answer 2.assuming 500 as the common tuples between r1 and r2,what is the maximum number of tuples that results in ]] A( r1) U ]] A r2. justify...
Two resistors, R1 = 20-ohm and R2 = 30-ohm, are connected in parallel to each other,...
Two resistors, R1 = 20-ohm and R2 = 30-ohm, are connected in parallel to each other, and this combination is connected across a 30-V source of emf. The current through the resistor R2 is:
The values of resistors R1 and R2 is 33.803 Ohms and 40.736 Ohms, respectively. If a...
The values of resistors R1 and R2 is 33.803 Ohms and 40.736 Ohms, respectively. If a current 0.47799 Amps runs through R2, what is the potential difference across R1? Please include the correct SI units in the answer.
Assume that you have a box of resistors that have a Gaussian distribution of resistances with...
Assume that you have a box of resistors that have a Gaussian distribution of resistances with mean µ = 100 Ω and standard deviation σ = 20 Ω (i.e., 20% resistors). Suppose that you wish to form a subgroup of resistors with µ = 100 Ω and standard deviation 5 Ω (i.e., 5% resistors) by selecting all resistors with resistance between the two limits r1 = µ−a and r2 = µ+a. (Apparently, you are too cheap to just order the...
A. Consider two concentric spherical structures of radius r1 and r2 such that r1 < r2...
A. Consider two concentric spherical structures of radius r1 and r2 such that r1 < r2 and full load Q and -2Q respectively. Calculate the magnitude of the field on ́ectrico in all three regions, i.e. within the smaller sphere, between the spheres and outside the sphere of the larger radius. Where does the electric field point to for this system? (no matter what material these concentric spherical are made of) B. Two cylindrical coaxial shells with radius r1 and...
If three resistors with resistance of R1, R2, R3 are wired in parralle, their combined combined...
If three resistors with resistance of R1, R2, R3 are wired in parralle, their combined combined resitance R is given by the following formula: 1/R= 1/R1 + 1/R2 +1/R3 The design of a voltmeter requires that the resitance R2 be 80 ohms greater than the restance of R1, that the restance of R3 be 5 ohms greater than R1, and that their combined restance be 10 ohms. Find the value of each resistance. R1=________ohms R2=________ohms R3=________ohms
For three resistors, R1, R2, and R3, sketch the schematic for the circuit if all three...
For three resistors, R1, R2, and R3, sketch the schematic for the circuit if all three are connected in parallel and determine in general the equivalent resistance. For three resistors, R1, R2, and R3, sketch the schematic for the circuit if all three are connected in series and determine in general the equivalent resistance. What will the equivalent resistance be for three 300 Ohm resistors connected in parallel?
Three resistors have values R1= 47Ω, R2 = 100Ω, and R3 = 10 Ω. There is...
Three resistors have values R1= 47Ω, R2 = 100Ω, and R3 = 10 Ω. There is a 1.5V battery. The battery and three resistors are all connected in various circuits described below. Calculate the equivalent (or total) resistance, and any currents for each of the following configurations: A) Series circuit B) Parallel circuit C) Series-parallel combination where R1 and R2 are in parallel and that combination is in series with R3.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT