Question

In: Physics

Consider a combustion plant which uses solid biomass directly in a boiler that is operating a...

Consider a combustion plant which uses solid biomass directly in a boiler that is operating a rankine cycle steam plant operates at 30% efficiency to generate electricity. At full operating capacity, the plant can process 2 million hectares of crops annually. Determine the annual electricity output (MWh) for this plant for two of the following crops: Wheat, Miscanthus, Switchgrass, Corn, and/or Hybrid Poplar. Consider (look-up) the energy content (HHV) and crop yields for different biomass types.

Solutions

Expert Solution

solution


Related Solutions

Consider a simple ideal Rankine cycle which uses water as the working fluid. The boiler pressure...
Consider a simple ideal Rankine cycle which uses water as the working fluid. The boiler pressure is 6100 kPa and the condenser pressure is 30 kPa. At the turbine inlet, steam is at 480°C. The isentropic efficiency of the turbine is 92 percent. The pump losses are negligible and the water leaving the condenser is subcooled by 6.3°C. The boiler is sized for a mass flow rate of 20 kg/s. Determine the following values. The temperature at the pump inlet....
In the boiler of a power plant are tubes through which water flows as it is...
In the boiler of a power plant are tubes through which water flows as it is brought from 0.8 MPa, 150°C to 240°C at essentially constant pressure. The total mass flow rate of the water is 100 kg/s. Combustion gases passing over the tubes cool from 1067 to 277 °C at essentially constant pressure. The combustion gases can be modeled as air as an ideal gas. There is no significant heat transfer from the boiler to its surroundings. Assuming steady...
designing a boiler in a chemical plant which is operated on twolevel L1 and L2 and...
designing a boiler in a chemical plant which is operated on twolevel L1 and L2 and two temeprature settings T1 and T2 ....L1: start inlet valve for fluid to flow in tank , L2 : stop inlet valve, T1 and T@ are the safe temperature range for some operation consider you as system engineer depending on follwing > promram development safe systes commiossioning fault finding sytem documentation What are the necessary action and feature you will add to task for...
The following system is a small power generating plant which contains a boiler, a superheater, a...
The following system is a small power generating plant which contains a boiler, a superheater, a turbine and a condenser. Describe each part of the system with reference to the equations required in terms of heat transfer and work transfer. The feed water flows at 1 tonne/hr at 50°C. The output pressure is 6 bar with a dryness fraction is 0.9 and the efficiency of the boiler is 75%. The calorific value of the fuel is 38MJ/kg. Determine the fuel...
Consider a steam power plant operating on a simple ideal Rankine cycle in which the steam...
Consider a steam power plant operating on a simple ideal Rankine cycle in which the steam enters the turbine at 3 MPa and 350C and is condensed in the condenser at 75 kPa. Determine the thermal efficiency of this cycle and sketch an appropriately labeled T-s diagram. Also compare this thermal efficiency to that a Carnot heat engine operating between these same two limits. The change in enthalpy across the pump = work done by the pump: h2-h1= v1(P2– P1)
Consider two 50 MW power generating plants. One plant is fueled by combustion of coal, the...
Consider two 50 MW power generating plants. One plant is fueled by combustion of coal, the other by solar energy. Using the concept of exergy, explain why the ecological impacts of the solar power process are lower than the coal fired process. Use words and diagrams in your answer
Consider palletizer at a bottling plant that has a first cost of $141,424, has operating and...
Consider palletizer at a bottling plant that has a first cost of $141,424, has operating and maintenance costs of $14,037 per year, and an estimated net salvage value of $44,603 at the end of 30 years. Assume an interest rate of 8%. What is the future worth of this project? Enter your answer as follow: 123456.78
Show step by step the answer and write clearly Consider a steam power plant operating on...
Show step by step the answer and write clearly Consider a steam power plant operating on the ideal reheat Rankine cycle. The steam enters the high-pressure stage turbine at 15 MPa and 600 oC and the condenser pressure is 10 kPa. If the intermediate pressure is 4 MPa and the steam enters the low-pressure stage turbine at 600 oC, determine the following: (a) Enthalpy at the end of each process (b) Heat added (c) Heat rejected (d) Work of pump...
Consider a steam power plant operating on a simple ideal Rankine cycle and having a net...
Consider a steam power plant operating on a simple ideal Rankine cycle and having a net power output of 57 MW. The steam enters the turbine at 9 MPa and 575 ° C and exits at 150 ° C, then it is cooled in the condenser to a pressure of 100 kPa by means of the cooling water from a lake and that circulates through the condenser tubes to a rate of 1370 kg / s. Consider leaving the pump...
Evolution of plant trait – Which adaptation is most important to plant success? i. Consider these...
Evolution of plant trait – Which adaptation is most important to plant success? i. Consider these three adaptations: vascular tissue, seeds, flowers. From these three adaptations which one of these specific traits is the most important to the success as plants as a species on the planet? ii. Your explanation must include: what survival advantages each of the three adaptions lends to plants.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT