A circuit has a 2.9 V battery connected in series with a switch. When the switch...

A circuit has a 2.9 V battery connected in series with a switch. When the switch is closed, the battery powers two paths in parallel, one of which has a resistor of resistance R1 = 80 Ω in series with an inductor of inductance L = 1×10−2 H , while the other has a resistor of resistance R2 = 230 Ω . What is the current supplied by the battery at a time t = 0.25 ms after the switch is closed? What is the current i1 supplied by the battery a time t = 0.25 ms after the switch is closed? Express your answer in amperes to three significant figures.

Expert Solution

Summary- This Problem is solved by using the concepts of transient conditions in DC state. Below are the images uploaded in sequence.

Manojponduru answered 8 months ago

Initially, a simple circuit has a battery connected in series by conducting copper wire to a...

Initially, a simple circuit has a battery connected in series by conducting copper wire to a lightbulb. In this configuration, the lightbulb shines brightly. Vivian thinks the lightbulb is too bright and wants to reduce its power output. What change should she make to the circuit? Please explain answer reasoning A. Add another identical lightbulb connected in parallel. B. Replace the conducting copper wire with a smaller diameter copper wire. C. Replace the conducting copper wire with a larger diameter...

A 24.0-V battery is connected in series with a resistor and an inductor, with R =...

A 24.0-V battery is connected in series with a resistor and an inductor, with R = 4.60 Ω and L = 7.00 H, respectively. (a) Find the energy stored in the inductor when the current reaches its maximum value. ________J (b) Find the energy stored in the inductor at an instant that is a time interval of one time constant after the switch is closed. ________J

1. When a switch is closed in a RL circuit with a battery, which of the...

1. When a switch is closed in a RL circuit with a battery, which of the following statement is TRUE? Back emf is maximum in the beginning and decreases exponentially with time Back emf is zero in the beginning and increases exponentially with time Current is maximum in the beginning and decreases exponentially with time Current is zero in the beginning and increases exponentially with time 2. When an inductor is connected to an AC voltage source with Vmax= 5...

2. A circuit contains 3 resistors connected in series and no battery. It is a closed...

2. A circuit contains 3 resistors connected in series and no battery. It is a closed circuit and has dimensions of 18 cm by 42 cm. The resistor values are 12, 15 and 18 ohms. A magnetic field directed out of the plane of the circuit changes from 52 T to 0 T in 2.9 sec. a. Sketch the circuit and indicate the direction of the initial magnetic field. b. What is the magnetic flux through the circuit when the...

A 140-mH inductor and a 4.80-Ω resistor are connected with a switch to a 6.00-V battery...

A 140-mH inductor and a 4.80-Ω resistor are connected with a switch to a 6.00-V battery as shown in the figure above. (a) After the switch is first thrown to a (connecting the battery), what time interval elapses before the current reaches 220 mA? ms (b) What is the current in the inductor 10.0 s after the switch is closed? A (c) Now the switch is quickly thrown from a to b. What time interval elapses before the current in...

Draw a circuit with a battery of 90 V is connected to four resistors, R1 =10...

Draw a circuit with a battery of 90 V is connected to four resistors, R1 =10 Ω, R2,= 20 Ω , R3 =30 Ω and R4= 40 Ω, as follows. Resistors R1 and R2 are connected in parallel with each other, resistors R3 and R4 are connected in parallel with each other, and both parallel sets of resistors are connected in series with each other across the battery. (20 Points) a. Find the equivalent resistor R12, for the partial circuits...

A simple electrical circuit comprises a battery and two 10.0 ? resistors connected in series. The...

A simple electrical circuit comprises a battery and two 10.0 ? resistors connected in series. The battery generates a voltage of 8.95 V and the current passing through the circuit is 425 mA. (a) Calculate the internal resistance (r) of the battery. (b) Briefly explain why a good voltmeter should have a high resistance.

A series RLC circuit connected to a 24-V AC source has a current of 150 mA...

A series RLC circuit connected to a 24-V AC source has a current of 150 mA when the AC source is set to 85 Hz. The voltage on the capacitor is measured to be 36 V. When the frequency of the source is adjusted in any way the current decreases. Calculate the values of R L, and C. In P4, the frequency of the AC source is increased until the voltage on the capacitor has dropped to 12 V. Calculate...

Two capacitors, C1 and C2, are connected in series and a battery, providing a voltage V,...

Two capacitors, C1 and C2, are connected in series and a battery, providing a voltage V, is connected across the two capacitors. (a) Find the equivalent capacitance, the energy stored in this equivalent capacitance, and the energy stored in each capacitor. (b) Show that the sum of the energy stored in each capacitor is the same as the energy stored in the equivalent capacitor. Will this equality always be true, or does it depend on the number of capacitors and...

A 100 F capacitor and a 225 resistor are connected in series with a 75.0 V battery....

A 100 F capacitor and a 225 resistor are connected in series with a 75.0 V battery. The switch is closed and the capacitor begins to charge. a)When does the capacitor hold 15.0 % of its maximum charge? Express your answer in milliseconds. b)What is the voltage across the resistor at this same time? Please state your answers as clear as possible and show all the steps and formulas used. Thank you!!!

Question