Draw a circuit with a battery of 90 V is connected to four resistors, R1 =10...

Draw a circuit with a battery of 90 V is connected to four resistors, R1 =10 Ω, R2,= 20 Ω , R3 =30 Ω and R4= 40 Ω, as follows. Resistors R1 and R2 are connected in parallel with each other, resistors R3 and R4 are connected in parallel with each other, and both parallel sets of resistors are connected in series with each other across the battery. (20 Points)

a. Find the equivalent resistor R12, for the partial circuits R1 and R2,

b. Find the equivalent resistor R34, for the partial circuits R3 and R4,

c. Find the equivalent resistor R1234, for the entire circuits with all four resistors R1, R2, R3, and R4

d. Find the current in the circuit with the single equivalent resistor R1234

e. Find the find the current and voltages across each of the partial circuits with resistors R12,

and R34.

e. Find the current and voltage across each of the four resistors R1, R2, R3, and R4

f. Find the power dissipated in each of the resistors R1, R2, R3, and R4

Expert Solution

Summary-This is the basic problem from Electricity. I have provided the step by step solution.

genius_generous answered 1 year ago

If a circuit consists of a battery connected to multiple resistors, and these resistors are connected...

If a circuit consists of a battery connected to multiple resistors, and these resistors are connected in series, what MUST be the same across each resistor? A. Voltage B. Current C. Resistance D. Power E. None of the above QUESTION 2 If a circuit consists of a battery connected to multiple resistors, and these resistors are connected in parallel, what MUST be the same across each resistor? A. Voltage B. Current C. Resistance D. Power E. None of the...

Four resistors are connected to a battery as shown in the figure. The current in the...

Four resistors are connected to a battery as shown in the figure. The current in the battery is I, the battery emf is ? = 6.20 V, and the resistor values are R1 = R, R2 = 2R, R3 = 4R, R4 = 3R. Find the voltages across each resistor. R 1, R2 and R3 are in series. R4 is in parallel.

2. A circuit contains 3 resistors connected in series and no battery. It is a closed...

2. A circuit contains 3 resistors connected in series and no battery. It is a closed circuit and has dimensions of 18 cm by 42 cm. The resistor values are 12, 15 and 18 ohms. A magnetic field directed out of the plane of the circuit changes from 52 T to 0 T in 2.9 sec. a. Sketch the circuit and indicate the direction of the initial magnetic field. b. What is the magnetic flux through the circuit when the...

Three resistors with resistances R1, R2, R3 are connected in parallel across a battery with voltage...

Three resistors with resistances R1, R2, R3 are connected in parallel across a battery with voltage V. By Ohm’s law, the current (amps) is I = V* [ (1/R1) + (1/R2) + (1/R3) ] Assume that R1, R2, R3, and V are independent random variables where R1 ~ Normal (m = 10 ohms, s = 1.5 ohm) R2 ~ Normal (m = 15 ohms, s = 1.5 ohm) R3 ~ Normal (m =20 ohms, s = 1.0 ohms)...

A simple electrical circuit comprises a battery and two 10.0 ? resistors connected in series. The...

A simple electrical circuit comprises a battery and two 10.0 ? resistors connected in series. The battery generates a voltage of 8.95 V and the current passing through the circuit is 425 mA. (a) Calculate the internal resistance (r) of the battery. (b) Briefly explain why a good voltmeter should have a high resistance.

1.) A set of 525 ohm resistors are connected to a 12.5 V battery. How would...

1.) A set of 525 ohm resistors are connected to a 12.5 V battery. How would you connect the resistors to achieve the minimum resistance and maximum resistance? what are the minimum and maximum resistance possible with five resistors? What are the minimum and maximum currents when connected to the battery? 2.) A small circle loop is inside a square loop. the large square loop of wire is connected to a battery and experiences a rapidly increasing current in a...

1.A circuit of resistors connected in series is plugged in a 120 V outlet. What can...

1.A circuit of resistors connected in series is plugged in a 120 V outlet. What can you tell about the voltage on each of resistor and current in each resistor? 2.A circuit of capacitors connected in parallel is plugged in a 120 V outlet. What can you tell about the voltage on each capacitor and current in each capacitor?

A circuit is constructed with four resistors, one inductor, one battery and a switch as shown....

A circuit is constructed with four resistors, one inductor, one battery and a switch as shown. The values for the resistors are: R1 = R2 = 56 Ω, R3 = 45 Ω and R4 = 91 Ω. The inductance is L = 255 mH and the battery voltage is V = 24 V. 1) The switch has been open for a long time when at time t = 0, the switch is closed. What is I1(0), the magnitude of the...

Draw and analyze a four resister BJT (CE) bias circuit with the following values: R1=10...

Draw and analyze a four resister BJT (CE) bias circuit with the following values: R1=10 kΩ, R2=12 kΩ, RC=5 kΩ, RE=3 kΩ and VCC=12 V, Find the operating points ICQ and VCEQ Assume a BJT transistor (npn) with β=100 and VBE=0.7V

A circuit has a 2.9 V battery connected in series with a switch. When the switch...

A circuit has a 2.9 V battery connected in series with a switch. When the switch is closed, the battery powers two paths in parallel, one of which has a resistor of resistance R1 = 80 Ω in series with an inductor of inductance L = 1×10−2 H , while the other has a resistor of resistance R2 = 230 Ω . What is the current supplied by the battery at a time t = 0.25 ms after the switch...

Question