Question

In: Physics

Initially, a simple circuit has a battery connected in series by conducting copper wire to a...

Initially, a simple circuit has a battery connected in series by conducting copper wire to a lightbulb. In this configuration, the lightbulb shines brightly. Vivian thinks the lightbulb is too bright and wants to reduce its power output. What change should she make to the circuit?

Please explain answer reasoning

A. Add another identical lightbulb connected in parallel.
B. Replace the conducting copper wire with a smaller diameter copper wire.

C. Replace the conducting copper wire with a larger diameter copper wire.

D. Change out the battery for one with a higher voltage.

Solutions

Expert Solution


Related Solutions

A simple electrical circuit comprises a battery and two 10.0 ? resistors connected in series. The...
A simple electrical circuit comprises a battery and two 10.0 ? resistors connected in series. The battery generates a voltage of 8.95 V and the current passing through the circuit is 425 mA. (a) Calculate the internal resistance (r) of the battery. (b) Briefly explain why a good voltmeter should have a high resistance.
A circuit has a 2.9 V battery connected in series with a switch. When the switch...
A circuit has a 2.9 V battery connected in series with a switch. When the switch is closed, the battery powers two paths in parallel, one of which has a resistor of resistance R1 = 80 Ω in series with an inductor of inductance L = 1×10−2 H , while the other has a resistor of resistance R2 = 230 Ω . What is the current supplied by the battery at a time t = 0.25 ms after the switch...
2. A circuit contains 3 resistors connected in series and no battery. It is a closed...
2. A circuit contains 3 resistors connected in series and no battery. It is a closed circuit and has dimensions of 18 cm by 42 cm. The resistor values are 12, 15 and 18 ohms. A magnetic field directed out of the plane of the circuit changes from 52 T to 0 T in 2.9 sec. a. Sketch the circuit and indicate the direction of the initial magnetic field. b. What is the magnetic flux through the circuit when the...
If a circuit consists of a battery connected to multiple resistors, and these resistors are connected...
If a circuit consists of a battery connected to multiple resistors, and these resistors are connected in series, what MUST be the same across each resistor? A. Voltage B. Current C. Resistance D. Power E. None of the above    QUESTION 2 If a circuit consists of a battery connected to multiple resistors, and these resistors are connected in parallel, what MUST be the same across each resistor? A. Voltage B. Current C. Resistance D. Power E. None of the...
A light bulb, a capacitor, and a nine-volt battery are wired up in series in a simple RC circuit.
A light bulb, a capacitor, and a nine-volt battery are wired up in series in a simple RC circuit. The light bulb has a resistance of 2.0 kΩ and the capacitor has a capacitance of 950 μF.(a) What is the electric current in the circuit at the exact moment the battery is connected (at t = 0)?(b) What is the electric current in the circuit 1 second after the battery was connected?(c) What is the electric current in the circuit...
An ac circuit has a resistance of 40 Ω connected in series to an inductor of...
An ac circuit has a resistance of 40 Ω connected in series to an inductor of inductive reactance equal to 30 Ω at a frequency of 50 Hz. Find the inductance of the inductor.
A circuit consists of a conducting movable bar and a lightbulb connected to two conducting rails...
A circuit consists of a conducting movable bar and a lightbulb connected to two conducting rails as shown in the figure below. An external magnetic field is directed perpendicular to the plane of the circuit. Which of the following actions will make the bulb light up? (Select all that apply.) a.The bar is moved to the left. b.The bar is moved to the right. c.The magnitude of the magnetic field is increased. d.The magnitude of the magnetic field is decreased....
An ammeter is connected in series to a battery of voltage Vb and a resistor of...
An ammeter is connected in series to a battery of voltage Vb and a resistor of unknown resistance Ru(Figure 1) . The ammeter reads a current I0. Next, a resistor of unknown resistance Rr is connected in series to the ammeter, and the ammeter's reading drops to I1. Finally, a second resistor, also of resistance Rr, is connected in series as well. Now the ammeter reads I2. Part A If i1 / i0 = 4/5, find i2 / i0. Express...
A capacitor C1 =1F is connected to a 1V battery using a wire with a total...
A capacitor C1 =1F is connected to a 1V battery using a wire with a total resistance R = 1Ohm Suppose after the charging is complete the capacitor C1 is connected to another capacitor C2 = 2 F using a wire with a total resistance of R =0.3 Ohm. Now the first capacitor discharges while the second one charges. 2.8 [1pt] How much charge was transferred through the resistor R during the discharge? ANSWER 2.9 [1pt] How much energy was...
The current through a 83 m long wire connected to a battery is 2.7 A. A...
The current through a 83 m long wire connected to a battery is 2.7 A. A section of the wire is cut off and used to build a circuit. When the remaining wire is connected to the same battery as before the current in the wire is 3.9 A. How much wire is left?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT