Design specifications require that a key dimension on a product measure 106 ± 12 units. A process being considered for producing this product has a standard deviation of five units.

a. What can you say (quantitatively) regarding the process capability? Assume that the process is centered with respect to specifications. (Round your answer to 4 decimal places.)

b. Suppose the process average shifts to 98. Calculate the new process capability. (Round your answer to 4 decimal places.)

c. What is the probability of defective output after the process shift? (Use Excel's NORM.S.DIST() function to find the correct probability. Round "z" values to 2 decimal places. Round your answer to 4 decimal places.)

Probability of defective output ?

1. a) What is a best cost provider strategy? Define. Explain how it is different from a cost leadership strategy (2 points).

b) Illustrate both strategies using a publicly-listed company for each strategy (i.e., 1 company for each strategy) within the same industry. Clearly identify the industry and the 2 companies you are discussing and explain how the companies are executing a best cost provider strategy and a cost leadership strategy? (2 points)

McBurger, Inc., wants to redesign its kitchens to improve productivity and quality. Three​ designs, called designs​ K1, K2, and​ K3, are under consideration. No matter which design is​ used, daily production of sandwiches at a typical McBurger restaurant is for

500

sandwiches. A sandwich costs

$1.30

to produce.​ Non-defective sandwiches​ sell, on the​ average, for

$2.50

per sandwich. Defective sandwiches cannot be sold and are scrapped.

The goal is to choose a design that maximizes the expected profit at a typical restaurant over a​ 300-day period. Designs​ K1, K2, and K3 cost

$100,000​,

$130,000​,

and

$180,000​,

respectively.

Under design​ K1, there is a .80 chance that 90 out of each 100 sandwiches are​ non-defective and a .20 chance that 70 out of each 100 sandwiches are​ non-defective. Under design​ K2, there is a .85 chance that 90 out of each 100 sandwiches are​ non-defective and a .15 chance that 75 out of each 100 sandwiches are​ non-defective. Under design​ K3, there is a .90 chance that 95 out of each 100 sandwiches are​ non-defective and a .10 chance that 80 out of each 100 sandwiches are​ non-defective.

The expected profit level of design K1 is

​$nothing.

​(Enter

your response as a real number rounded to two decimal

places.​)

The expected profit level of design K2 is

​$nothing.

​(Enter

your response as a real number rounded to two decimal

places.​)

The expected profit level of design K3 is

​$nothing.

​(Enter

your response as a real number rounded to two decimal

places.​)

What is the expected profit level of the design that achieves the maximum expected​ 300-day profit​ level?

Design

▼

K1

K2

K3

achieves the maximum expected​ 300-day profit​ level, with a profit of

​$nothing.

​(Enter

your response as a real number rounded to two decimal

places.​)

Explain and describe the concept of a population projection.

PART A

Write a C program that takes the names and surnames of the students and then displays the initial and last name of the name on the screen. For instance, if Onur Uslu is entered as input, the output of our program must be O. Uslu.

PART B

Write a C program that asks the user to enter a string and then sends it to a function that does the following job and shows the response from the function on the screen. The function must return all words in the string from the program by converting the initial letters into their large form.

Example Output

Type of a string:Hello world

New sentence:Hello World

"Changes are needed in the present education system to adequately meet the societal and personal needs of the Caribbean people." Do you agree or disagree.

A company needs to budget for fuel, they have to consider the weight of the shipment.

Average weight= 20,160 pounds

The CEO wonders if preferences have changed and you have to adjust the budget for fuel. Based on 14 shipments, the average weight has been 20,901 pounds with a sample standard deviation of 800 pounds. What should you conclude at the 99% confidence level?

Show your work on the calculated score (Commands from Excel)

Indicate what your calculated score is

Indicate and justify what your critical score is and determine if this sample average is statistically significant from the mean

Think of an algorithm to find the maximum value in an (unsorted) array. Now, think of an algorithm to find the second largest value in the array. Which is harder to implement? Which takes more time to run (as measured by the number of comparisons performed)? Now, think of an algorithm to find the third largest value. Finally, think of an algorithm to find the middle value. Which is the most difficult of these problems to solve?

Find the missing values for each company

During Year 1 and Year 2, Agatha Corp. completed the following transactions relating to its bond issue. The corporation’s fiscal year is the calendar year.

Year 1

Jan. 1 Issued $310,000 of 10-year, 6 percent bonds for $298,000. The annual cash payment for interest is due on December 31.

Dec. 31 Recognized interest expense, including the straight-line amortization of the discount, and made the cash payment for interest.

Dec. 31 Closed the interest expense account.

Year 2

Dec. 31 Recognized interest expense, including the straight-line amortization of the discount, and made the cash payment for interest.

Dec. 31 Closed the interest expense account.

Required

a-1. When the bonds were issued, was the market rate of interest more or less than the stated rate of interest?

a-2. If Agatha had sold the bonds at their face amount, what amount of cash would Agatha have received?

b. Prepare the liabilities section of the balance sheet at December 31, Year 1 and Year 2.

c. Determine the amount of interest expense that will be reported on the income statements for Year 1 and Year 2.

d. Determine the amount of interest that will be paid in cash to the bondholders in Year 1 and Year 2.

Predict the spontaneity of a reaction (and the temperature dependence of the spontaneity) for each possible combination of signs for ?rH and?rS (for the system).

-?rH negative, ?rS positive

-?rH positive, ?rS negative

-?rH negative, ?rS negative

-?rH positive, ?rS positive

Objective: Design and test a 4-bit Right shift register with serial input.

Part I

Use D flip-flops (FF) in your design (Memory → D Flip-Flop). Ensure the output of each FF (Q) goes to an output so the functionally of the shift register can be verified. All 4 Flip-Flop need to share a common clock which is connected to an input you can control. Verify the functionally of the circuit by changing the input value and toggling the clock. You should see the value in the register shift to the right.

Part II

Modify the circuit so that if the register contains 1010 OR 0111 an output signal goes active (logic 1). Verify the functionally of the circuit by shifting in the two values to be detected and ensure the output goes high (logic 1).

Please use some kind of software and attach screenshots

. Lang Co. manufacturers its products in a continuous process involving two departments, Machining and Assembly. Present entries to record the following selected transactions related to production during June:

(a) Materials purchased on account, $225,000

(b) Materials requisitioned by; Machining, $73,000 direct and $9,000 indirect materials; Assembly, $4,900 indirect materials.

(c) Direct labor used by Machining, $23,000, Assembly $47,000.

(D) Depreciation expenses: Machining $2,000, Assembly $8,000

(e) Factory overhead applied: Machining $9,700, Assembly $11,300

(f) Machining Department transferred $98,300 to Assembly Department; Assembly Department transferred $83,400 to finished goods.

(g) Cost of goods sold $72,000

1. Briefly describe what each of the following statements does.

file.seekp(100L, ios::beg);

file.seekp(-10L, ios::end);

file.seekg(-25L, ios::cur);

file.seekg(30L, ios::cur);

2. Describe the mode that each of the following statements causes a file to be opened in.

file.open("info.dat", ios::in | ios::out);

file.open("info.dat", ios::in | ios::app);

file.open("info.dat", ios::in | ios::out | ios::ate);

file.open("info.dat", ios::in | ios::out | ios::binary);