Question

In: Electrical Engineering

You are using a poorly constructed 4-bit natural binary-coded absolute encoder and observe that

You are using a poorly constructed 4-bit natural binary-coded absolute encoder and observe that, as the encoder rotates through the single step from code 3 to code 4, the encoder outputs several different and erroneous values. If misalignment between the photosensors and the code disk is the problem, what possible codes could result during the code 3-to-4 transition?

Solutions

Expert Solution



Related Solutions

Design and Test an 8-bit Adder using 4-bit adder. Use 4-bit adder coded in class using...
Design and Test an 8-bit Adder using 4-bit adder. Use 4-bit adder coded in class using full adder that is coded using data flow model. Use test bench to test 8-bit adder and consider at least five different test vectors to test it.
Create the Decoder module in System Verilog to decode the 4-bit Binary Coded Decimal digit into...
Create the Decoder module in System Verilog to decode the 4-bit Binary Coded Decimal digit into seven-segment code. You can also include and instantiate your decoder schematic from Section 3 instead of writing a new System Verilog module.
Represent -60 in binary using 8-bit signed magnitude. Add the following unsigned 8 bit binary numbers...
Represent -60 in binary using 8-bit signed magnitude. Add the following unsigned 8 bit binary numbers as shown. 01110101 + 00111011 Add the following unsigned 8 bit binary numbers as shown. 01000100 + 10111011
1. Design and implement a 4 bit binary to excess 3 code converter using CMOS transistors....
1. Design and implement a 4 bit binary to excess 3 code converter using CMOS transistors. (Note: Students are expected to design the circuit with truth table, solve the output expression by use of K Map or suitable circuit Reduction technique and implement using CMOS transistors.)
Design and implementation 4-bit binary full adder with fast carry using behavioral and structural style of...
Design and implementation 4-bit binary full adder with fast carry using behavioral and structural style of modelling. (LS 7483) I want logic diagram and its truth table also i want code for it in VDHL software
Design and implementation 4-bit binary full adder with fast carry using behavioral and structural style of...
Design and implementation 4-bit binary full adder with fast carry using behavioral and structural style of modelling. (LS 7483) i want logic diagram and truth table
Implement 4-bit binary adder/subtractor using gate level. ( verilog code and test bench)
Implement 4-bit binary adder/subtractor using gate level. ( verilog code and test bench)
Design a 32 bit after using a single 4 bit using verilog code
Design a 32 bit after using a single 4 bit using verilog code
Design a 4-bit multiplier by using 4 bit full adder and write a verilog code.
Design a 4-bit multiplier by using 4 bit full adder and write a verilog code.
Construct a 4 * 4 addition table of binary 2-bit strings modulo 2. For example, 01...
Construct a 4 * 4 addition table of binary 2-bit strings modulo 2. For example, 01 + 11 = 10 and 11 + 11 = 00. Replace each element in the table by its decimal equivalent plus 1. For example, 11 is replaced by 4. Is the resulting table a Latin square? Generalize this method for constructing Latin squares of order n
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT