Given discharge is 450 m3/s, river width is 50 m at a depth of 6 m...

Given discharge is 450 m³/s, river width is 50 m at a depth of 6 m and bed slope of 0.0003, the sediment has a typical diameter of 0.01 m. Estimate the bedload transport using Shield and Einstein-Brown formula.

2. Annual precipitation measurements (Pi in cm) for M City, were given in Problem 1. Determine the magnitude of the 10-year precipitation depth if the data fit:

the normal distribution.
the Gumbel distribution.

How many times was the P10 (normal) exceeded in the 20-year annual precipitation record given in Problem 1?

Expert Solution

Ally Wells answered 1 year ago

A rectangular channel with a base width of 3 m carries a discharge of 6 m3/s...

A rectangular channel with a base width of 3 m carries a discharge of 6 m3/s at a depth of 1.1 m. At downstream, there is a gradual rising of a channel bed of 0.1 m. a) Plot the specific energy curve from y = 0.4 m to 1.3 m in a step 0.1 m and from the curve, determine the depth of flow at the downstream section. Label the graph and show your working answers clearly on the graph....

13.(LAB) A discharge of 25 m3/s is passing in a rectangular channel of bed width 8.0...

13.(LAB) A discharge of 25 m3/s is passing in a rectangular channel of bed width 8.0 meters and water depth 3.0 meters. The channel bed width is gradually contracted from 8.0 meters at section (1) to 6.0 meters at section (2). In the contraction zone, a smooth hump is placed in the channel in which the bed level is gradually increased by 1.00 m. Determine: (i) The change in water levels, (ii).The minimum height of hump so that y2 =...

Two streams merge to form a river. One stream has a width of 8.4 m, depth...

Two streams merge to form a river. One stream has a width of 8.4 m, depth of 3.5 m, and current speed of 2.1 m/s. The other stream is 6.4 m wide and 3.1 m deep, and flows at 2.5 m/s. If the river has width 10.5 m and speed 2.8 m/s, what is its depth? Clearly explain why the Volume Flow rate R, (the volume of fluid per second that passes a point in a flow), is equal to...

A flow of 2.0 m3 /s is carried in a rectangular channel of 1.8 m width...

A flow of 2.0 m3 /s is carried in a rectangular channel of 1.8 m width at a depth of 1.0 m (section 1). There is an upward step of 0.18 m together with a contraction where b reduces to 1.4 m (section 2). a) Draw the side view and top view of the channel described above. b) Calculate the specific energy at section 1 and plot the specific energy curve. Show y1, E1, V1 2 /2g on the curve....

6 m3/s recirculated room air at 22oC Tdb and 50% saturation, is mixed with 1.5 m3/s...

6 m3/s recirculated room air at 22oC Tdb and 50% saturation, is mixed with 1.5 m3/s of incoming fresh air at 10oC Tdb and 6oC Twb. Determine all properties of the mixed air that you can get form the psychrometric chart (APPENDIX 2).

The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n...

The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n is 0.03. Determine the normal depth when the slope is 0.008. Check whether the flow is sub or supercritical. If the normal depth is to be kept at 2 m, determine the slope.

4 m3/s of water flows in a Rectangular channel with base width 3 m, base slope...

4 m3/s of water flows in a Rectangular channel with base width 3 m, base slope J= 0.0016 and roughness coefficient K= 80. a) find the normal depths and critical depth of the current. B) determine the current regime. roughhness coefficient given 80

In a rectangular cross-section canal with a width of 10 m and a depth of 1.5...

In a rectangular cross-section canal with a width of 10 m and a depth of 1.5 m, uniform and Continuous current monitoring is applied. The channel's Manning coefficient includes 0.015. Base because its slope is 0.0005. Considering this information a) By writing the numerical magnitude of water face slope and energy line slope and its rationale Set. b) Calculate the speed of the current in the channel. c) Calculate the flow of the current in the channel. d ) When...

A 50 m3/s is conveyed down a 5-m wide rectangular channel (n = 0.012) with a...

A 50 m3/s is conveyed down a 5-m wide rectangular channel (n = 0.012) with a slope of 0.02 m/m. The channel transitions into a second channel with a slope of 0.0008 m/m. A hydraulic jump occurs on the downstream channel. What is the downstream depth of the second channel after the jump? What is the depth of the water before the jump? What is the energy loss due to the jump? How long is the total distance of the...

A rectangular channel of bottom width B = 7 m carries an average discharge of Q...

A rectangular channel of bottom width B = 7 m carries an average discharge of Q = 8 m3/s. There are two successive long reaches. The first reach has s01=0.015 and n1=0.010; and the second reach has s02=0.0017 and n2=0.021. Classify the slopes.

Question