6 m3/s recirculated room air at 22oC Tdb and 50% saturation, is mixed with 1.5 m3/s...

6 m³/s recirculated room air at 22^oC T_db and 50% saturation, is mixed with 1.5 m³/s of incoming fresh air at 10^oC T_db and 6^oC T_wb. Determine all properties of the mixed air that you can get form the psychrometric chart (APPENDIX 2).

Expert Solution

samet mamat answered 1 year ago

There are 10 m3/s of moist air at 22C and relative humidity of 50% that enter...

There are 10 m3/s of moist air at 22C and relative humidity of 50% that enter a heating element until its temperature becomes 35C. Determine the amount of heat required and the final %Rh of the air.

Use: Air at a temperature of 293 K, with 50% saturation pressure for water in the...

Use: Air at a temperature of 293 K, with 50% saturation pressure for water in the air far above the pool and a velocity of 0.5 m/sec. The vapor pressure of water at this temperature is 2.3388 kPa. The length is 10 m and the width is 4 m. How fast will the level drop in a day? The kinematic viscosity of air is 1.51 x 10-5m2/sec. The gas constant is 8.314 Pa.m3/(mol.K). The diffusion coefficient is 0.25 cm2/sec. Show...

An air-conditioned room is to be maintained at 18oC, percentage saturation 40%. The fabric heat gains...

An air-conditioned room is to be maintained at 18oC, percentage saturation 40%. The fabric heat gains are 3000 W and there are a maximum of 20 people in the room at any time. Neglecting all other heat gains or losses calculate the required volume flow rate of air to be supplied to the room and its percentage saturation when the air supply temperature is 10oC. (Sensible heat gains per person = 100 W; latent heat gains per person = 30W;...

Given discharge is 450 m3/s, river width is 50 m at a depth of 6 m...

Given discharge is 450 m3/s, river width is 50 m at a depth of 6 m and bed slope of 0.0003, the sediment has a typical diameter of 0.01 m. Estimate the bedload transport using Shield and Einstein-Brown formula. 2. Annual precipitation measurements (Pi in cm) for M City, were given in Problem 1. Determine the magnitude of the 10-year precipitation depth if the data fit: the normal distribution. the Gumbel distribution. How many times was the P10 (normal) exceeded...

A window-mounted air conditioner supplies 19 m3/min of air at 15°C, 1 bar to a room....

A window-mounted air conditioner supplies 19 m3/min of air at 15°C, 1 bar to a room. Air returns from the room to the evaporator of the unit at 22°C. The air conditioner operates at steady state on a vapor-compression refrigeration cycle with Refrigerant 22 entering the compressor at 4 bar, 10°C. Saturated liquid refrigerant at 11.5 bar leaves the condenser. The compressor has an isentropic efficiency of 70%, and refrigerant exits the compressor at 11.5 bar. Determine: (a) the compressor...

A window-mounted air conditioner supplies 29 m3/min of air at 15°C, 1 bar to a room....

A window-mounted air conditioner supplies 29 m3/min of air at 15°C, 1 bar to a room. Air returns from the room to the evaporator of the unit at 22°C. The air conditioner operates at steady state on a vapor-compression refrigeration cycle with Refrigerant 22 entering the compressor at 4 bar, 10°C. Saturated liquid refrigerant at 9 bar leaves the condenser. The compressor has an isentropic efficiency of 70%, and refrigerant exits the compressor at 9 bar. Determine: (a) the compressor...

Problem 4.084 SI A rigid copper tank, initially containing 1.5 m3 of air at 295 K,...

Problem 4.084 SI A rigid copper tank, initially containing 1.5 m3 of air at 295 K, 4 bar, is connected by a valve to a large supply line carrying air at 295 K, 15 bar. The valve is opened only as long as required to fill the tank with air to a pressure of 15 bar. Finally, the air in the tank is at 320 K. The copper tank, which has a mass of 20 kg, is at the same...

1.7 kg/s NH3 and 20 m3/s air at 25 oC and 1 atm are fed into...

1.7 kg/s NH3 and 20 m3/s air at 25 oC and 1 atm are fed into a reactor in which the ammonia is completely consumed. The product gas emerges at 300 oC. Calculate the rate at which heat must be transferred to or from the reactor, assuming operation at approximately 1 atm. You must show full systematic working. The standard heat of reaction for the oxidation of ammonia is given below: 4 NH3(g) + 5 O2(g) ? 4 NO(g) +...

Air is flowing in a 1.5 m2 wind tunnel at 200 m/s at a pressure of...

Air is flowing in a 1.5 m2 wind tunnel at 200 m/s at a pressure of 250kPa, and temperature of 20°C at the entrance. Calculate: (i) Mach number (ii) Total Temperature (iii) Total Pressure (iv) Mass flow rate of air.

Water to a residential area is transported at a rate of 1.5 m3/s via 70-cm-internal-diameter concrete...

Water to a residential area is transported at a rate of 1.5 m3/s via 70-cm-internal-diameter concrete pipes with a surface roughness of 3 mm and a total length of 1520 m. In order to reduce pumping power requirements, it is proposed to line the interior surfaces of the concrete pipe with 2-cm thick petroleum-based lining that has a surface roughness thickness of 0.04 mm. There is a concern that the reduction of pipe diameter to 66 cm and the increase...

Question