Question

In: Civil Engineering

A 50 m3/s is conveyed down a 5-m wide rectangular channel (n = 0.012) with a...

A 50 m3/s is conveyed down a 5-m wide rectangular channel (n = 0.012) with a slope
of 0.02 m/m. The channel transitions into a second channel with a slope of 0.0008 m/m. A
hydraulic jump occurs on the downstream channel. What is the downstream depth of the
second channel after the jump? What is the depth of the water before the jump? What is
the energy loss due to the jump? How long is the total distance of the hydraulic jump?

Solutions

Expert Solution

comment for any doubt about this solution thank you
Don't forget to upvote if you got your answer


Related Solutions

A 5 m wide rectangular channel carries a flow of 20 m3/s. The slope of the...
A 5 m wide rectangular channel carries a flow of 20 m3/s. The slope of the channel is 0.005 and the Manning’s n is 0.03. The flow encounters a 0.5 m step up that is 0.1 m long. The depths far upstream and downstream are normal. Classify this channel Qualitatively sketch this scenario, label gradually varied flow curves and provide appropriate depths. Draw this scenario on an E-Y cycle graph, and label all depth changes.
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n...
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n is 0.03. Determine the normal depth when the slope is 0.008. Check whether the flow is sub or supercritical. If the normal depth is to be kept at 2 m, determine the slope.
A flow of 2.0 m3 /s is carried in a rectangular channel of 1.8 m width...
A flow of 2.0 m3 /s is carried in a rectangular channel of 1.8 m width at a depth of 1.0 m (section 1). There is an upward step of 0.18 m together with a contraction where b reduces to 1.4 m (section 2). a) Draw the side view and top view of the channel described above. b) Calculate the specific energy at section 1 and plot the specific energy curve. Show y1, E1, V1 2 /2g on the curve....
A rectangular channel with a base width of 3 m carries a discharge of 6 m3/s...
A rectangular channel with a base width of 3 m carries a discharge of 6 m3/s at a depth of 1.1 m. At downstream, there is a gradual rising of a channel bed of 0.1 m. a) Plot the specific energy curve from y = 0.4 m to 1.3 m in a step 0.1 m and from the curve, determine the depth of flow at the downstream section. Label the graph and show your working answers clearly on the graph....
4 m3/s of water flows in a Rectangular channel with base width 3 m, base slope...
4 m3/s of water flows in a Rectangular channel with base width 3 m, base slope J= 0.0016 and roughness coefficient K= 80. a) find the normal depths and critical depth of the current. B) determine the current regime. roughhness coefficient given 80
A rectangular channel 10m wide carries a discharge of 40m3 /s. If at a section in...
A rectangular channel 10m wide carries a discharge of 40m3 /s. If at a section in this channel the depth is 1.5m, how far (upstream or downstream) from this section will the depth be 2.0m.Take So=0.00009and manning’s constant n=0.017.
13.(LAB) A discharge of 25 m3/s is passing in a rectangular channel of bed width 8.0...
13.(LAB) A discharge of 25 m3/s is passing in a rectangular channel of bed width 8.0 meters and water depth 3.0 meters. The channel bed width is gradually contracted from 8.0 meters at section (1) to 6.0 meters at section (2). In the contraction zone, a smooth hump is placed in the channel in which the bed level is gradually increased by 1.00 m. Determine: (i) The change in water levels, (ii).The minimum height of hump so that y2 =...
A rectangular channel 2 m wide has a bottom slope of 0.01 and a roughness coefficient...
A rectangular channel 2 m wide has a bottom slope of 0.01 and a roughness coefficient of 0.017. A sluice gate 2 m wide is located in the channel. The sluice gate has a contraction coefficient of 0.61 and a discharge coefficient of 0.58. The depth of water just upstream from the gate is 2 m. The depth of water just downstream from the gate is 0.5 m. Determine how far upstream from the gate the depth of water will...
A sluice gate in a 3.0 m wide rectangular, horizontal, channel release a discharge of 18.0...
A sluice gate in a 3.0 m wide rectangular, horizontal, channel release a discharge of 18.0 cms. The gate opening is 0.67 m and the coefficient of contraction can be assumed to be 0.6. Examine the type of hydraulic jump formed when the tailwater is (1) 3.60 m (2) 5.00 m and (3) 4.09m.
A rectangular channel 2.0 m wide has a discharge of 0.350 cms. Find the height of...
A rectangular channel 2.0 m wide has a discharge of 0.350 cms. Find the height of a rectangular weir spanning the full width of the channel that can be used to pass this discharge while maintaining an upstream depth of 0.850 m. if a contracted rectangular weir of length 1.5 m and height 0.6 m is used what would be the depth of flow upstream of the weir?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT