Question

In: Civil Engineering

A 100-mL water sample is collected from the activated sludge process of municipal wastewater treatment. The...

A 100-mL water sample is collected from the activated sludge process of municipal wastewater treatment. The sample is placed in a drying dish (weight = 0.5000 g before the sample is added), and then placed in an oven at 104°C until all the moisture is evaporated. The weight of the dried dish is recorded as 0.5625 g. A similar 100-mL sample is filtered and the 100-mL liquid sample that passes through the filter is collected and placed in another drying dish (weight of dish before sample is added is also 0.5000 g). This sample is dried at 104°C and the dried dish’s weight is recorded as 0.5325 g. Determine the concentration (in mg/L) of:

(a) total solids,

(b) total dissolved solids,

(c) total suspended solids, and

(d) volatile suspended solids, (Assume that VSS = 0.7 x TSS.)

Solutions

Expert Solution

Ally Wells answered 1 year ago
Next > < Previous

Related Solutions

A wastewater treatment plant with activated-sludge process treats wastewater for 120,000 m3/d. The effluent standard for...
A wastewater treatment plant with activated-sludge process treats wastewater for 120,000 m3/d. The effluent standard for both BOD and TSS is 20 mg/L. Influent TSS concentration is 450 mg/L and influent BOD concentration is 220 mg/L. MLSS concentration is 3500 mg/L (Assume no nitrification and temperature is 20°C). Determine: (20 pts) (a) Influent BOD and TSS concentration to the aeration tank if the treatment efficiencies in primary clarifier are 30% and 70% for BOD and TSS, respectively. (b) Determine sludge...
A wastewater plant with the activated sludge process received 5 × 106 L/day of wastewater with...
A wastewater plant with the activated sludge process received 5 × 106 L/day of wastewater with a BOD5 of 500 mg/L. The primary clarifier removes 30% of the BOD and primary clarify effluent has no biomass (Xi=0 mg/L). Recycle (Qr) and waste sludge (Qw) flows are 25% and 2% of Qin, respectively. Effluent BOD5 from secondary clarifier and waste sludge is 20 mg/L. Microorganism concentration in the waste sludge (Xw) is 6,000 mg/L. Soluble BOD5 is biologically converted into CO2...
how is sludge treated differently in water treatment vs wastewater treatment?
how is sludge treated differently in water treatment vs wastewater treatment?
A conventional activated-sludge plant treats 10.0 MGD of municipal wastewater with a BOD concentration of 240...
A conventional activated-sludge plant treats 10.0 MGD of municipal wastewater with a BOD concentration of 240 mg/l and suspended solids of 200 mg/l. The sludge flow pattern is shown in Figure 11-1 of the textbook with a gravity belt thickener to concentrate the excess activated sludge. Primary and thickened activated sludge are pumped separately to the anaerobic digester. The primary clarifier removes 50% of the suspended solids and 35% of the BOD. The primary sludge solids content is 4.0%. The...
A conventional activated-sludge plant treats 10.0 MGD of municipal wastewater with a BOD concentration of 240...
A conventional activated-sludge plant treats 10.0 MGD of municipal wastewater with a BOD concentration of 240 mg/l and suspended solids of 200 mg/l. The sludge flow pattern is shown in Figure 11-1 of the textbook with a gravity belt thickener to concentrate the excess activated sludge. Primary and thickened activated sludge are pumped separately to the anaerobic digester. The primary clarifier removes 50% of the suspended solids and 35% of the BOD. The primary sludge solids content is 4.0%. The...
Design an aeration tank for activated sludge wastewater treatment designed to meet an effluent standard of...
Design an aeration tank for activated sludge wastewater treatment designed to meet an effluent standard of 10 mg/L BOD5. The flow from the primary effluent is 10 m3/min with a primary effluent BOD5 of 250 mg/L. The design calls for the suspended solids to equal 3500 mg/L for an SRT of 5 days. The decay rate constant is 0.03 day-1 and the yield is 0.75 mg/mg. Determine: the tank volume required to meet these specifications, the resulting mass of sludge...
An activated sludge process with an aeration basin volume of 0.3 MG is treating wastewater with...
An activated sludge process with an aeration basin volume of 0.3 MG is treating wastewater with the average daily flow of 2 MGD. The raw sewage entering the treatment plant has an average BOD5 of 400 mg/L. The primary treatment removes 25% of BOD5 and the subsequent activated sludge process is designed to remove 90% of BOD5. Given: Plant effluent BOD5 concentration = 30 mg/L Biomass concentration in the aeration tank = 2,000 mg/L Biomass concentration in the plant effluent...
1-S0 in an activated sludge process represents _________________________ concentration. 2-X in an activated sludge process represents...
1-S0 in an activated sludge process represents _________________________ concentration. 2-X in an activated sludge process represents ___________________________ concentration. 3-Biomass present in the influent is a product of biomass concentration in the influent multiplied by ______________ ___________. 4-Hydraulic detention time is a ratio of ______________ and _________________. 5- ___________________ represents the portion of microorganisms discharged from the process.
Sedimentation basins are employed both in filter plants for drinking water treatment and in municipal wastewater...
Sedimentation basins are employed both in filter plants for drinking water treatment and in municipal wastewater treatment plants. Briefly explain what solids are removed in each of these sedimentation basins.
If a water sample collected from a municipal source (like the Las Vegas Valley Water District)...
If a water sample collected from a municipal source (like the Las Vegas Valley Water District) tests positive for coliforms, what does this mean in terms of public health?
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT