Sedimentation basins are employed both in filter plants for drinking water treatment and in municipal wastewater...

Sedimentation basins are employed both in filter plants for drinking water treatment and in municipal wastewater treatment plants. Briefly explain what solids are removed in each of these sedimentation basins.

Expert Solution

Solids removed in the drinking water sedimentation process -

Genereally the solids removed in drinking water are inorganic matter like silt as turbidity , inorganic metals , there could be a little amount of organic matter but that is removed in filteration or disinfection process , conclusion can be taken as most of the solids removed in sedimentation in drinking water process are inorganic solids .

Solids removed in sedimentation process of wastewater -

Generally the solids removed in the waste water are the organic solids like organic wastes , the reason in the wastewater treatement is to decrease the oxygen demand so the it could be discharged without affecting the enviroment . So, the conclusion is in wate water sedimentaton process , most of the solids are organic solids .

.............................................................................................

I tried the explain all points . For more clarification . Kindly comment . Thank you.

Ally Wells answered 1 year ago

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process...

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process followed by an activated sludge process composed of aeration tanks and a secondary clarifiers. This problem focuses on the activated sludge process. The activated sludge process receives a flow of 15 million gallons per day (MGD). The primary sedimentation process effluent has a BOD5 concentration of 180 mgBOD5/L (this concentration is often referred as S). Before flowing into the activated sludge process, the primary...

A municipal wastewater treatment plant discharges 20,000 m3/d of treated wastewater to a stream. The wastewater...

A municipal wastewater treatment plant discharges 20,000 m3/d of treated wastewater to a stream. The wastewater has a BOD5 of 30 mg/L with a k1 of 0.23 d-1. The temperature of the wastewater is 20 oC, and the dissolved oxygen is 2.0 mg/L. The stream just above the point of wastewater discharge flows at 0.65 m3/s, has a BOD5 of 5.0 mg/L, and is 90% saturated with oxygen. The temperature of the stream is also 20 oC. After mixing, the...

A municipal wastewater treatment plant is designed for COD removal and nitrification. The wastewater characteristics and...

A municipal wastewater treatment plant is designed for COD removal and nitrification. The wastewater characteristics and kinetic coefficients are described in the table below. The aeration tank DO concentration is 2.0 mg/L and MLSS concentration is 2500 mg/L. The temperature is 15C. Assume that the concentration of influent NH4-N that is nitrified accounts for 80% of influent TKN. Calculate the following parameters as a function of SRT (i.e., derive mathematical expressions of the following parameters as a function of SRT,...

A 100-mL water sample is collected from the activated sludge process of municipal wastewater treatment. The...

A 100-mL water sample is collected from the activated sludge process of municipal wastewater treatment. The sample is placed in a drying dish (weight = 0.5000 g before the sample is added), and then placed in an oven at 104°C until all the moisture is evaporated. The weight of the dried dish is recorded as 0.5625 g. A similar 100-mL sample is filtered and the 100-mL liquid sample that passes through the filter is collected and placed in another drying...

Explain the need for municipal wastewater re-use in thermal plants?

what is the wastewater treatment principal and layout? Discuss how to design a sedimentation tank

About wastewater treatment: A. Explain the primary, secondary and tertiary WWTPs (Wastewater Treatment Plants). You can...

About wastewater treatment: A. Explain the primary, secondary and tertiary WWTPs (Wastewater Treatment Plants). You can use diagrams and explain them. b. In addition to the WWTPs, mention and explain two alternatives for treating wastewater.

proposal for potable water or wastewater treatment

14. (a) Explain with specific details why the effluents from the municipal waster water treatment plants...

14. (a) Explain with specific details why the effluents from the municipal waster water treatment plants (MWTPs) that use tertiary treatment process pose lower risks to the receiving environment compared to the plants that use primary or secondary treatment process. (b) Explain with appropriate documented examples how the effluents from MWTPs affect aquatic ecosystems and why. (c) Compare the benefits and limitations of end of pipe whole effluent toxicity evaluation and Environmental Effects Monitoring approach.

Environmental Engineering Water Treatment Wastewater Treatment Waste Water Treatment. A river is used as water resource...

Environmental Engineering Water Treatment Wastewater Treatment Waste Water Treatment. A river is used as water resource for a town. During monitoring, high level of NH3 is detected. A) What are the reasons for this pollution? B) Is it logical to continue feeding the water treatment system? C) Can NH3 be removed by regular units in a typical water treatment plant? In summary, how do you solve this problem, explain your reasons.

Question