Question

In: Other

(1) C&A's potato chip filling process has a lower specification limit of 9.5 oz and an...

(1) C&A's potato chip filling process has a lower specification limit of 9.5 oz and an upper specification limit of 10.5 oz. The standard deviation is 0.3 oz. and the mean is 10 oz. What is the process capability index (Cp) for the chip filling process?

(a) 0.56
(b) 1.11
(c) 0.33
(d) 3.33


(2) Which of the following represents customer requirement from a process?

(a) Sample size in control charts
(b) USL and LSL
(c) Process standard deviation
(d) UCL and LCL


(3) The mean of a process is 50, and the standard deviation is 2. The company uses statistical control process (SPC) to monitor the process. It uses sample size on 4, and 3 sigma (z=3) control limits. What are the Upper Control Limit (UCL) and Lower Control Limit (LCL)?

(a) LCL=48 and UCL=52
(b) LCL=44 and UCL=56
(c) LCL=47 and UCL=53
(d) LCL=49 and UCL=51


(4) If a company narrows the control limits for a process without making any other changes, which of the following will happen?

(a) The process will generate more products not acceptable by customers
(b) The process will not be stopped even when assignable cause is present
(c) The capability index for the process will reduce to a lower value
(d) The process will be stopped more often suspecting assignable cause

Solutions

Expert Solution

1. process capabilityindex = (USL - LSL)/6Sigma = 1/6(0.3)= 0.56 answer (a) 0.56

2. ans. (d) UCL and LCL

3. UCL = mean +3sigma = 50 +3(2) = 56. LCL = mean - 3sigma = 50 - 3(2) = 44 ans. (b) LCL=44 and UCL=56

4.ans. (d) The process will be stopped more often suspecting assignable cause


Related Solutions

Consider the bottle-filling process, which has a lower specification limit of 0.99 liter and an upper...
Consider the bottle-filling process, which has a lower specification limit of 0.99 liter and an upper specification limit of 1.01 liters. The standard deviation is 0.005 liter and the mean is 1 liter. The company wants to reduce its defective probability from 45,500 PPM to 1000 PPM. A. Determine the current Capability index. B. Determine the new aspired capability index. C. To what level would they have to reduce the standard deviation in the process to meet this target?
1) A quality control engineer at a potato chip company tests the bag filling machine by...
1) A quality control engineer at a potato chip company tests the bag filling machine by weighing bags of potato chips. Not every bag contains exactly the same weight. But if more than 12% of bags are over-filled then they stop production to fix the machine. They define over-filled to be more than 1 ounce above the weight on the package. The engineer weighs 103 bags and finds that 32 of them are over-filled. He plans to test the hypotheses...
a process in statistical control has a mean of .3119 and specification limit of .307 to...
a process in statistical control has a mean of .3119 and specification limit of .307 to .317. if the standard deviation of the process is .0013, what percent of the process output is expected to be below the specification limit?
A quality control engineer at a potato chip company tests the bag filling machine by weighing...
A quality control engineer at a potato chip company tests the bag filling machine by weighing bags of potato chips. Not every bag contains exactly the same weight. But if more than 16% of bags are over-filled then they stop production to fix the machine. They define over-filled to be more than 1 ounce above the weight on the package. The engineer weighs 201 bags and finds that 66 of them are over-filled. He plans to test the hypotheses H0:...
Question 3 A quality control engineer at a potato chip company tests the bag filling machine...
Question 3 A quality control engineer at a potato chip company tests the bag filling machine by weighing bags of potato chips. Not every bag contains exactly the same weight. But if more than 14% of bags are over-filled then they stop production to fix the machine. They define over-filled to be more than 1 ounce above the weight on the package. The engineer weighs 175 bags and finds that 56 of them are over-filled. He plans to test the...
The weight specification for packets of noodles is 150±10 grams. The packet-filling process is in a...
The weight specification for packets of noodles is 150±10 grams. The packet-filling process is in a state of statistical control and the packet weights are normally distributed with a standard deviation of 1.5 grams. However, the process is not centered at 150 grams. a)Find the value for process mean so that only 4 packets in 1000 fall below the lower specification. b)For the value of the process mean you found in part (i), what percent of the packets will be...
Flextronchip, an OEM manufacturer, has a fifth-generation chip for cell phones, with chip specification of 0.2...
Flextronchip, an OEM manufacturer, has a fifth-generation chip for cell phones, with chip specification of 0.2 ± 0.0002 mm for the distance between two adjacent pins. The loss due to a defective chip has been estimated as $36. Required: 1. Compute the value of k, the cost coefficient in the Taguchi quality loss function (QLF), L(x) = k(x − T)2. 2. Assume that the quality control manager takes a sample of 100 chips from the production process. The results are...
Determine the process capability performance metrics using Minitab of a process that had a lower specification...
Determine the process capability performance metrics using Minitab of a process that had a lower specification of 2 and an upper specification of 16 with the following responses:
1. There is a lower limit but no upper limit for a random variable that follows...
1. There is a lower limit but no upper limit for a random variable that follows the a. ​uniform probability distribution. b. ​exponential probability distribution. c. ​normal probability distribution. d. ​binomial probability distribution. 2. The weight of football players is normally distributed with a mean of 200 pounds and a standard deviation of 25 pounds. What is the minimum weight of the middle 95% of the players? a. 196 b. 190 c. 151 d. 249 3. A scatter diagram reveals...
Consider a process under statistical quality control. The upper specification limit of the statistic of interest...
Consider a process under statistical quality control. The upper specification limit of the statistic of interest is 101, while the lower specification is 42. The sample plan is for 7 samples per period. The average range of the process is 13. What is the capability of the process assuming it is centered exactly between the specification limits and the statistic of interest has a normal distribution?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT