Question

In: Statistics and Probability

Consider a process under statistical quality control. The upper specification limit of the statistic of interest...

Consider a process under statistical quality control. The upper specification limit of the statistic of interest is 101, while the lower specification is 42. The sample plan is for 7 samples per period. The average range of the process is 13. What is the capability of the process assuming it is centered exactly between the specification limits and the statistic of interest has a normal distribution?

Solutions

Expert Solution

SOLUTION:

Please give a rating for this Solution,THANK YOU....

orchestra answered 2 years ago
Next > < Previous

Related Solutions

a process in statistical control has a mean of .3119 and specification limit of .307 to...
a process in statistical control has a mean of .3119 and specification limit of .307 to .317. if the standard deviation of the process is .0013, what percent of the process output is expected to be below the specification limit?
Consider the bottle-filling process, which has a lower specification limit of 0.99 liter and an upper...
Consider the bottle-filling process, which has a lower specification limit of 0.99 liter and an upper specification limit of 1.01 liters. The standard deviation is 0.005 liter and the mean is 1 liter. The company wants to reduce its defective probability from 45,500 PPM to 1000 PPM. A. Determine the current Capability index. B. Determine the new aspired capability index. C. To what level would they have to reduce the standard deviation in the process to meet this target?
Upper Control Limit (UCLx). (3 marks) Lower Control Limit (LCLx). (3 marks) Upper Control Limit (UCLR).
Upper Control Limit (UCLx). Lower Control Limit (LCLx). Upper Control Limit (UCLR).
In quality control, statistical process control (SPC ) is often employed to analyze the process capability...
In quality control, statistical process control (SPC ) is often employed to analyze the process capability in manufacturing or service operations. Explain the following with an example each : What is a p chart  ? What is a c chart ? There are 3 machines in your factory which can produce a ruler. The rulers as produced has a spread in length between 12.5 thru 12.4 inch. The standard deviation of the 3 machines are * 0.15 * 0.09 * 0.13...
In quality control, statistical process control (SPC ) is often employed to analyze the process capability...
In quality control, statistical process control (SPC ) is often employed to analyze the process capability in manufacturing or service operations. Explain the following with an example each : What is a p chart  ? What is a c chart ? There are 3 machines in your factory which can produce a ruler. The rulers as produced has a spread in length between 12.5 thru 12.4 inch. Given the standard deviation of the 3 machines are as follows, calculate the process...
Statistical process control charts: A. display upper and lower limits for process variables or attributes and...
Statistical process control charts: A. display upper and lower limits for process variables or attributes and signal when a process is no longer in control. B. display the measurements on every item being produced. C. are a graphic way of classifying problems by their level of importance, often referred to as the 80-20 rule. D. indicate to the process operator the average outgoing quality of each lot. E. indicate to the operator the true quality of material leaving the process.
Statistical process control explain the types of control charts available for analysis, the basis under which...
Statistical process control explain the types of control charts available for analysis, the basis under which their limits are defined and change, the types of analysis that lead to decisions of controlled or not-controlled, and the types of risks associated with different sample sizes and limit settings. In particular, describe what it means statistically to declare that a process is not in control.
Applications of Statistical Process Control and Quality Improvement Tools in Transactional and Service Business. The tools...
Applications of Statistical Process Control and Quality Improvement Tools in Transactional and Service Business. The tools are: 1. Cause and Effect Analysis. 2. Check sheets/ tally sheets. 3. Graphs. 4. Histograms. 5. Pareto analysis. 6. Scatter analysis. 7. Control charts. . For discussion, I want you to discuss how these tools are being used in your realm of work? If they are not being used, then how do you see them being used? Identify at least one tool being used...
Given the data below, what is the upper control limit for the Moving Range control chart?...
Given the data below, what is the upper control limit for the Moving Range control chart? Please enter your answer with at least 4 significant digits. Data: Observation 132.4654 118.9743 124.6528 130.3063 144.1334 118.4584 135.1793 115.2477 138.6022 104.4394 128.8716 133.7959 113.2013 120.4394 142.4859 123.592 135.9269 123.5473 139.3181 138.444 135.2332 125.4248 123.4138 138.3623 120.3414 126.7968 126.2955 138.4302 133.506 115.1217 119.105 136.3829 142.9304 146.3562 115.0906 147.2637 143.7961 140.0805
Explain statistical process control(SPC) and how it relates to continuous process improvement. Relate Demmings 14 Quality...
Explain statistical process control(SPC) and how it relates to continuous process improvement. Relate Demmings 14 Quality Points and explain how statistical data can assist with quality improvements efforts.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT