The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark. There is a 22.0 N block hanging from the 80 cm mark. Decide where each of the other blocks should be placed, one at a time, to balance out the 22.0 N block. <img src="//img.wizedu.com/questions/62c59530-cdd0-11ec-a61f-d938cccec868.png" title="1651905520303163.png" alt="image.png"/>At what mark on the meter stick would you place a 18.0 N block to balance the 22.0 N block?At what mark on the meter stick would you place a 420 N block to balance the 22.0 N block?

Question

In: Physics

The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark.

The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark. There is a 22.0 N block hanging from the 80 cm mark. Decide where each of the other blocks should be placed, one at a time, to balance out the 22.0 N block.

At what mark on the meter stick would you place a 18.0 N block to balance the 22.0 N block?

At what mark on the meter stick would you place a 420 N block to balance the 22.0 N block?

Solutions

Expert Solution

genius_generous answered 2 years ago

Next > < Previous

Related Solutions

The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark.

The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark. There is a 21.0 N block hanging from the 80 cm mark. Decide where each of the other blocks should be placed, one at a time, to balance out the 21.0 N block. At what mark on the meter stick would you place a 18.0 N block to balance the 21.0 N block? At what mark on...

A particle of mass 0.350 kg is attached to the 100-cm mark of a meterstick of...

A particle of mass 0.350 kg is attached to the 100-cm mark of a meterstick of mass 0.150 kg. The meterstick rotates on the surface of a frictionless, horizontal table with an angular speed of 6.00 rad/s. (a) Calculate the angular momentum of the system when the stick is pivoted about an axis perpendicular to the table through the 50.0-cm mark. (b) Calculate the angular momentum of the system when the stick is pivoted about an axis perpendicular to the...

1) A meter stick is placed in a support stand and balanced at its center of gravity. A 50 gram mass is placed at the 25.00 cm mark.

1) A meter stick is placed in a support stand and balanced at its center of gravity. A 50 gram mass is placed at the 25.00 cm mark. An unknown mass is placed on the other side of the meter stick and moved until the entire system is balanced. If the unknown mass is placed at the 75.00 cm mark, then what is the value of the unknown mass? Ignore the mass of the knife-edge clamps and assume that...

The center of gravity of the meter stick is 49 cm. mass of meter stick 50...

The center of gravity of the meter stick is 49 cm. mass of meter stick 50 g . mass of hanger #1 =5 g. mass of hanger #2 = 5 g. 1.Place the fulcrum at 51 cm. Attach a 200 g mass, plus hanger #1, at 17 cm on the meter stick and calculate where to attach a 200 g mass, plus hanger #2, to balance it. 2.Balance the stick with the fulcrum at its center of gravity. Attach a...

To the end of a 50 cm long string, a ball of 100 g, which is...

To the end of a 50 cm long string, a ball of 100 g, which is swinging under a vertical circle under the influence of gravity, is tied. When the rope makes an angle = 12 ° with the ball, the ball has a speed of 2.2 m / s. a) Find the current Radial component of the acceleration (ar) b) When angle = 18 °, find the magnitude of the tangential acceleration (at). c) Find the magnitude of the...

As shown below, a 100 kg student is compressed 50 cm on a spring with a...

As shown below, a 100 kg student is compressed 50 cm on a spring with a spring constant of k = 80,000 N/m. He is on top of a 10 m frictionless hill. He then is released from rest. He goes down to the bottom of the hill before sliding up a 30° frictionless hill. a. (8 pts) Find the speed of the student when he reaches the bottom of the hill. b. (9 pts) Find the distance D the...

A solar cell module 100 cm x 50 cm which generate power 100 W peak per...

A solar cell module 100 cm x 50 cm which generate power 100 W peak per module. Solar power plant planned to generate electrical power to a village with 50 houses. If each of house is given electrical power 200 W with consumption of 5 hours and the capability of solar cell to catch the sun at peak average 6 hours per day. So: a) Calculate Total needed solar cell modules b) Calculate total of battery storage needed that have...

The figure shows a meter stick lying on the bottom of a 100-cm-long tank with its...

The figure shows a meter stick lying on the bottom of a 100-cm-long tank with its zero mark against the left edge. You look into the tank at a 30 angle, with your line of sight just grazing the upper left edge of the tank. a. What mark do you see on the meter stick if the tank is empty? b. What mark do you see on the meter stick if the tank is half full of water? c. What...

Consider a 62.7-cm long lawn mower blade rotating about its center at 4070 rpm. a) Calculate...

Consider a 62.7-cm long lawn mower blade rotating about its center at 4070 rpm. a) Calculate the linear speed of the tip of the blade. b) If safety regulations require that the blade be stoppable within 3.33 s, what minimum angular acceleration will accomplish this? Assume that the angular acceleration is constant.

Subjects