Question
In: Physics
A particle of mass 0.350 kg is attached to the 100-cm mark of a meterstick of...
A particle of mass 0.350 kg is attached to the 100-cm mark of a meterstick of mass 0.150 kg. The meterstick rotates on the surface of a frictionless, horizontal table with an angular speed of 6.00 rad/s.
(a) Calculate the angular momentum of the system when the stick
is pivoted about an axis perpendicular to the table through the
50.0-cm mark.
(b) Calculate the angular momentum of the system when the stick is
pivoted about an axis perpendicular to the table through the 0-cm
mark.
Solutions
genius_generous answered 11 months agoRelated Solutions
A small block with mass 0.350 kg is attached to a string passing through a hole...
A small block with mass 0.350 kg is attached to a string passing
through a hole in a frictionless, horizontal surface. The block is
originally revolving in a circle with a radius of 0.500 m about the
hole with a tangential speed of 1.50 m/s, uniformly. Consider the
block as a particle. Moment of inertia of a particle is I=mr2,
where r is the radius of the circle. Of course a tension force of
the string is holding the block...
A particle of mass 2.00 kg is attached to a spring with a force constant of...
A particle of mass 2.00 kg is attached to a spring with a force
constant of 300 N/m. It is oscillating on a horizontal frictionless
surface with an amplitude of 4.00 m. A 7.00 kg object is dropped
vertically on top of the 2.00 kg object as it passes through its
equilibrium point. The two objects stick together.
(a) Does the amplitude of the vibrating system increase or
decrease as a result of the collision?
decreases
increases
no change
(b)By...
A particle of mass 4.00 kg is attached to a spring with a force constant of...
A particle of mass 4.00 kg is attached to a spring with a force
constant of 300 N/m. It is oscillating on a horizontal frictionless
surface with an amplitude of 5.00 m. A 9.00 kg object is dropped
vertically on top of the 4.00 kg object as it passes through its
equilibrium point. The two objects stick together.
a) By how much does the amplitude of the vibrating system change
as a result of collision?
b) By how much does...
The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark.
The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark. There is a 22.0 N block hanging from the 80 cm mark. Decide where each of the other blocks should be placed, one at a time, to balance out the 22.0 N block. At what mark on the meter stick would you place a 18.0 N block to balance the 22.0 N block?At what mark on...
The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark.
The meterstick shown is 100 cm long. It is free to pivot around its center of gravity (CG), which is at the 50 cm mark. There is a 21.0 N block hanging from the 80 cm mark. Decide where each of the other blocks should be placed, one at a time, to balance out the 21.0 N block. At what mark on the meter stick would you place a 18.0 N block to balance the 21.0 N block? At what mark on...
A disk of radius 14 cm and has a mass of 10 kg is attached to...
A disk of radius 14 cm and has a mass of 10 kg is attached to a
hub which is a
disk of mass 8 kg and radius 5cm. The disks are mounted on a
frictionless axel
that runs through the center. A rope passes over the hub and
supports a 10 kg
mass on one side and a 5 kg mass on the other. If the rope does not
slip on the
hub,
a.) What is the tension in...
A 1-kg mass stretches a spring 20 cm. The system is attached to a dashpot that...
A 1-kg mass stretches a spring 20 cm. The system is attached to
a dashpot that imparts a damping force equal to 14 times the
instantaneous velocity of the mass. Find the equation of motion if
the mass is released from equilibrium with an upward velocity of 3
m/sec.
SOLVE THIS USING MATLAB CODE (SECOND ORDER DIFFERENTIAL
EQUATIONS)
SOLVE THIS USING MATLAB CODE (SECOND ORDER DIFFERENTIAL
EQUATIONS)
SOLVE THIS USING MATLAB CODE (SECOND ORDER DIFFERENTIAL
EQUATIONS)
SOLVE THIS USING MATLAB...
A meterstick (L = 1 m) has a mass of m = 0.168 kg. Initially it...
A meterstick (L = 1 m) has a mass of m = 0.168 kg. Initially it
hangs from two short strings: one at the 25 cm mark and one at the
75 cm mark.
1) What is the tension in the left string?
2) Now the right string is cut! What is the initial angular
acceleration of the meterstick about its pivot point? (You may
assume the rod pivots about the left string, and the string remains
vertical)
3) What...
A meterstick (L = 1 m) has a mass of m = 0.19 kg. Initially it...
A meterstick (L = 1 m) has a mass of m = 0.19 kg. Initially it
hangs from two short strings: one at the 25 cm mark and one at the
75 cm mark.
What is the tension in the left string right after the right
string is cut?
A particle of mass m is attached to a spring with a spring constant k. The...
A particle of mass m is attached to a spring with a spring
constant k. The other end of the spring is forced to move in a
circle in the x ? y plane of radius R and angular frequency ?. The
particle itself can move in all 3 directions. Write down the
Lagrangian, and derive the equations of motion.
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- A)Given a generic array with ‘n’ items (not only integers). Give a solution for checking whether...
- Explain virtualization as a key technology in cloud computing environments, as well as the purpose of...
- A system is set up to take raw grading information from the console and calculate a...
- I have an 8 by 8 array that has values ranging from 1-64. I am wanting...
- The background information and instruction of the question is provided below, and i only asked for...
- Which business or industry sectors have the most startups companies that consider a small and medium...
- 16. Cost of trade credit Firms usually offer their customers some form of trade credit. This...
ADVERTISEMENT