Methane is compressed adiabatically in a pipeline pumping station from 3500 kPa and 35°C to 5500...

Methane is compressed adiabatically in a pipeline pumping station from 3500 kPa and 35°C to 5500 kPa at a rate of 1.5 kg mol·s−1. If the compressor efficiency is 0.78, what is the power requirement of the compressor and what is the discharge temperature of the methane? ( if you could explaine it step by step )

Expert Solution

NOTE: DEAR STUDENT, IF YOU REQUIRE PROOF FOR EQUATIONS USED IN QUESTION, KINDLY INFORM ME. I SHALL HELP YOU.

Amanda K answered 2 years ago

A gas turbine expands air adiabatically at 1000 kPa and 550 ⁰C to 120 kPa and...

A gas turbine expands air adiabatically at 1000 kPa and 550 ⁰C to 120 kPa and 130⁰C. Air enters the turbine through a 0.25 m 2 opening with an aveage velocity of 45 m/s, and exhausts through a 1 m2 opening. Assume the air is ideal gas with constant specific heats. Take the constant pressure specific heat and gas constant of air as Cp= 1.05 kJ/(kg K) and R=0.287 kJ/(kg K), respectively. Determine; (a) the mass flow rate of air...

Air is compressed from 100 Kpa and 22 C to an outlet pressure 8 times greater....

Air is compressed from 100 Kpa and 22 C to an outlet pressure 8 times greater. The compressor is not well insulated and loses heat at a rate of 120 kJ/kg. It is also note that there is a decrease in the entropy of the air of 0.4 kJ/kg-K between the inlet & the outlet. Assuming constant specific heats determine a) The outlet air temperature b) The required work input (kJ/kg) c) The entropy generation sgen (kJ/kg-K) during the compression...

R22 is compressed adiabatically and reversibly from saturated vapor at -20 deg F to 200 psia....

R22 is compressed adiabatically and reversibly from saturated vapor at -20 deg F to 200 psia. Find the final temperature and the specific work done.

3.19 A gas with adiabatic exponent γ is compressed adiabatically from an initial state (Pi, Vi)...

3.19 A gas with adiabatic exponent γ is compressed adiabatically from an initial state (Pi, Vi) to final state (Pf, Vf). (a) Show that the work done in this process is W=((ViPi)/y-1)*[(Vi/Vf)^(y-1) -1] (b) Evaluate the result numerically for one mole of helium gas initially at P = 1.0 atm and T = 300 K compressed to half its initial volume. (c) Compute the work done in an isothermal compression from the same initial point to half the initial volume....

1 kg / s of steam is compressed in an adiabatic compressor from 200 kPa and...

1 kg / s of steam is compressed in an adiabatic compressor from 200 kPa and 200 ° C to 3000 kPa and 400 ° C. How powerful is the compressor? is this transformation possible (briefly argue)?

Air is compressed adiabatically in a piston–cylinder assembly from 1 bar, 300 K to 8 bar,...

Air is compressed adiabatically in a piston–cylinder assembly from 1 bar, 300 K to 8 bar, 600 K. The air can be modeled as an ideal gas and kinetic and potential energy effects are negligible. Determine the amount of entropy produced, in kJ/K per kg of air, for the compression. What is the minimum theoretical work input, in kJ per kg of air, for an adiabatic compression from the given initial state to a final pressure of 8 bar? Note...

Air is compressed adiabatically in a piston–cylinder assembly from 1 bar, 300 K to 4 bar,...

Air is compressed adiabatically in a piston–cylinder assembly from 1 bar, 300 K to 4 bar, 600 K. The air can be modeled as an ideal gas and kinetic and potential energy effects are negligible. Determine the amount of entropy produced, in kJ/K per kg of air, for the compression. What is the minimum theoretical work input, in kJ per kg of air, for an adiabatic compression from the given initial state to a final pressure of 4 bar? Note...

An adiabatic gas turbine uses air to produce work. Air expands adiabatically from 600 kPa and...

An adiabatic gas turbine uses air to produce work. Air expands adiabatically from 600 kPa and 287 C to 90 kPa and 67 C. Take specific heats at room temperature (300 K). a) Find the isentropic efficiency of the turbine. b) Find the work produced by the turbine for a mass flow rate of 2.5 kg/s. c) If the mass flow rate of air is again 2.5 kg/s, find the entropy generation under steady conditions

In an Otto cycle air is compressed from an initial pressure 120 kPa and temperature 370...

In an Otto cycle air is compressed from an initial pressure 120 kPa and temperature 370 T (K). The cycle has compression ratio of 10. In the constant volume heat addition process 1000 kJ/kg heat is added into the air. Considering variation on the specific heat of air with temperature, determine, (a) the pressure and temperature at the end of heat addition process (show the points on P-v diagram) (b) the network output (c) the thermal efficiency (d) the mean...

QUESTION NO 1 In an Otto cycle air is compressed from an initial pressure 120 kPa...

QUESTION NO 1 In an Otto cycle air is compressed from an initial pressure 120 kPa and temperature (T = 380). The cycle has compression ratio of 10. In the constant volume heat, addition process 1000 kJ/kg heat is added into the air. Considering variation on the specific heat of air with temperature, determine, (a) the pressure and temperature at the end of heat addition process (show the points on P-v diagram) (b) the network output (c) the thermal efficiency...

Question