Shows a new process in which 0.0100 kg of methane (an ideal gas) is compressed from...

Shows a new process in which 0.0100 kg of methane (an ideal gas) is compressed from a pressure of 0.100 MPa and a temperature of 20.0 °C to a pressure of 10.0 MPa in a polytropic process with n = 1.35. Determine the moving boundary work required.

Determine the work required in Example 4.5 if the final pressure of the methane is 0.500 MPa.

If the work required in Example 4.5 is ?5.00 kJ, determine the final temperature and pressure of the methane.

If the gas used in Example 4.5 were air, determine the work required to compress it polytropically from 14.7 psia, 70.0°F to 150.°F with n = 1.33.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

Consider a process in which one mole of a monatomic ideal gas is compressed from a...

Consider a process in which one mole of a monatomic ideal gas is compressed from a volume of V1 =1.459m3 to V2 =1m3 at a constant temperature of T =353.7 K. (a) What is the entropy change of the gas (in J/K units)? (b) What is the change in the value of PV for the gas (in J units)? (c) What is the energy change of the gas (in J units)? (d) What is the enthalpy change of the gas...

One kg mole of an ideal gas is compressed isothermally at 127°C from 1 atm to...

One kg mole of an ideal gas is compressed isothermally at 127°C from 1 atm to 10 atm in a piston-and-cylinder arrangement. Calculate the entropy change of the gas, the entropy change of the surroundings, and the total energy change resulting from the process, if: (a) the process is mechanically reversible and the surroundings consist of a heat reservoir at 127°C. (b) the process is mechanically reversible and the surroundings consist of a heat reservoir at 27°C. (c) the process...

(a)Air, which can be assumed to behave as an ideal gas, undergoes a process from 150kPa...

(a)Air, which can be assumed to behave as an ideal gas, undergoes a process from 150kPa and 400K to 600kPa and 500K within a piston cylinder. Can this process occur adiabatically? (Think about what the limitations on ???? are to answer this question). (b)Now consider air which is compressed in an air compressor adiabatically from 150kPa and 400K to 1000K and 600kPa. It enters the air compressor with a mass flow rate of 1kg/s. Determine the rate of entropy produced...

One mole of an ideal gas (CP = 5R/2) in a closed piston/cylinder is compressed from...

One mole of an ideal gas (CP = 5R/2) in a closed piston/cylinder is compressed from Ti = 298 K, Pi = 0.1 MPa to Pf = 0.25 MPa by the following pathways. For each pathway, calculate ΔU, ΔH, Q, and WEC: (a) isothermal; (b) constant volume; (c) adiabatic. i need your help as soon as possible please!!! please give me step by step so i can understand it Thank you!

. An ideal gas initially contained at 1 bar and 25ºC, is compressed to a final...

. An ideal gas initially contained at 1 bar and 25ºC, is compressed to a final state of 5 bar and 25ºC. Although the initial and final temperatures are the same, the process is NOT isothermal. Rather, the change of state occurs in two steps. First, the gas is cooled at constant pressure (i.e., 1 bar). Second, the gas is heated at constant volume. Please calculate Q, W, DU, and DH for the two steps. Note: Cp*=29.1 J/mol/K, and 1...

two moles of a monatomic ideal gas are compressed in a cylinder at a constant temperature...

two moles of a monatomic ideal gas are compressed in a cylinder at a constant temperature of 85 c until the original pressure has tripled? a)what is the work done on the gas? b)How much heat is transfered out of the gas? A monatomic ideal gas in a cylinder is held at a constant temperature 230kpa and is cooled and compressed from 1.7 to 1.2 a) what is the internal energy of the gas? b)How much heat is transferred out...

Take temperatures and efficiencies to be exact. A monatomic ideal gas (? = 1.67) is compressed...

Take temperatures and efficiencies to be exact. A monatomic ideal gas (? = 1.67) is compressed adiabatically from a pressure of 3.00

A sample of 11.8 liters of an ideal gas at 24.0°C and 725 torr is compressed...

A sample of 11.8 liters of an ideal gas at 24.0°C and 725 torr is compressed and heated so that the volume is 6.6 liters and the temperature is 73.0°C. What is the pressure in the container?

5 moles of ideal gas is initially at 300 K and 5 bar. It is compressed...

5 moles of ideal gas is initially at 300 K and 5 bar. It is compressed to 10 bar at 300 K. This change is carried out by two different reversible processes: A: heating at constant volume followed by cooling at constant pressure B: cooling at constant pressure followed by heating at constant volume Depict these processes on a PT graph. (Hand drawn on engineering sheet would suffice). Calculate ΔU, ΔH, Q, and W requirements for each path. Cv=20.78 J/mol.K...

2) An ideal gas cycle operates via the following 4 stages: 1→2 The gas is compressed...

2) An ideal gas cycle operates via the following 4 stages: 1→2 The gas is compressed adiabatically 2→3 The gas is ignited and heated at constant pressure 3→4 The gas expands adiabatically 4→1 Heat is removed from the gas at constant pressure a) Draw the cycle on a pressure-volume diagram, labelling the states 1, 2, 3, and 4 and showing where heat enters the cycle and where heat is removed from the cycle. Identify the highest pressure phigh and lowest...

Subjects