A rectangular rosette is mounted on a steel plate having a modulus f elasticity E=200GN/m2 and...

A rectangular rosette is mounted on a steel plate having a modulus f elasticity E=200GN/m2 and Poission’s ratio =0.3. The strains measured are ε1=500×10-6; ε2=400×10-6; ε3= -100×10-6. Develop a MATLAB code to compute maximum shear stress and the orientation angle for the principle axis of the stress.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

Modulus of Elasticity of Concrete? Explain how it is defined. Modulus of Elasticity of steel?

A steel has a modulus of elasticity of 29,000 ksi and an elastic limit of 52...

A steel has a modulus of elasticity of 29,000 ksi and an elastic limit of 52 210 psi. A rod of this material and cross section of 0.0186 in2 and 36 in length is fastened vertically to a beam with a load of 410 lb at the opposite end. Determine: a) If this load is removed, will the bar return to its initial length? Justify the answer; b) The unitary deformation of the bar in these conditions; c) The minimum...

1) Identify the type of steel (alloy?) with values similar to the following: Modulus of Elasticity...

1) Identify the type of steel (alloy?) with values similar to the following: Modulus of Elasticity = 189.75 MPa Ultimate Tensile Strenght (UTS) = 740.05 MPa Cup Cone Fracture Toughness = 4.84 MPa 2) Identify the type of treated steel(alloy?) with values similar to the following: Modulus of Elasticity = 326.07 MPa Ultimate Tensile Strenght (UTS) = 408.97 MPa Cup Cone Fracture Toughness = 140.91 MPa My guess is that this one is some type of heat treated steel, the...

What properties do you use to determine the grade of steel (ie modulus of elasticity)?

I Need the solution of Elasticity Equations for Rectangular Plate Subjected to Bidirectional Sinusoidal load. (A...

I Need the solution of Elasticity Equations for Rectangular Plate Subjected to Bidirectional Sinusoidal load. (A closed form solution would be prefarable).Assume neccesary conditions wherever required. This question pertains to Advanced mechanics of materials.

Yield strength and modulus of elasticity of steel containing 0.4% carbon had been determined as 300...

Yield strength and modulus of elasticity of steel containing 0.4% carbon had been determined as 300 MPa and 230 GPa, respectively. Estimate the yield strength and modulus of elasticity of the steel for a carbon content of 1.1% and explain the way of your estimation.

A rectangular glass plate (Young's Modulus 70 GPa, Ultimate Tensile Strength 138 MPa, fracture Toughness Kic...

A rectangular glass plate (Young's Modulus 70 GPa, Ultimate Tensile Strength 138 MPa, fracture Toughness Kic = 1.2 MPa.m0.5) has a length of 200 mm, width of 100 mm and a thickness of 5 mm. The plate is subjected to an in-plane tensile load across its width. (a) What is the maximum load the plate can carry ifit had no flaws? (b) What is the maximum flaw size that can be tolerated at the centre of the plate before the...

Parameter Steel . Modulus of Elasticity 30,000,000 psi Proportional/Elastic Limit 34,000 psi Allowable Bending Stress 24,000...

Parameter Steel . Modulus of Elasticity 30,000,000 psi Proportional/Elastic Limit 34,000 psi Allowable Bending Stress 24,000 psi Allowable Axial (C or T) Stress 24,000 psi Allowable Shear Stress 16,500 ps You have a 25-foot long, simply supported W12-50 steel beam. It is supporting a single 10,000# point load at its midpoint. Including the weight of the beam, answer the questions below: A. What is the maximum bending moment (foot-#) and resulting maximum bending stress (psi)? Is this allowable? B. What...

A steel alloy specimen having a rectangular cross section of dimensions 19.1 mm × 3.0 mm...

A steel alloy specimen having a rectangular cross section of dimensions 19.1 mm × 3.0 mm (0.7520 in. × 0.1181 in.) has the stress-strain behavior shown in the Animated Figure 6.22. If this specimen is subjected to a tensile force of 95120 N (21380 lbf) then (a) Determine the amount of elastic strain induced. (b) Determine the amount of plastic strain induced. (c) If its original length is 590 mm, what will be its final length after this force is...

Indicate the number of significant figures in each of the following measured quantities: (a) 3.774 km, (b) 205 m2, (c) 1.700 cm, (d) 350.00 K, (e) 307.080 g, (f) 1.3 × 103 m/s.

Subjects