What properties do you use to determine the grade of steel (ie modulus of elasticity)?

What properties do you use to determine the grade of steel (ie modulus of elasticity)?

Expert Solution

According to the World Steel Association, there are over 3,500 different grades of steel.

Steel can be broadly categorized into four groups based on their chemical compositions:

Carbon Steels
Alloy Steels
Stainless Steels
Tool Steels

The table below shows the typical properties of steels at room temperature (25°C).

Ally Wells answered 1 year ago

Modulus of Elasticity of Concrete? Explain how it is defined. Modulus of Elasticity of steel?

A steel has a modulus of elasticity of 29,000 ksi and an elastic limit of 52...

A steel has a modulus of elasticity of 29,000 ksi and an elastic limit of 52 210 psi. A rod of this material and cross section of 0.0186 in2 and 36 in length is fastened vertically to a beam with a load of 410 lb at the opposite end. Determine: a) If this load is removed, will the bar return to its initial length? Justify the answer; b) The unitary deformation of the bar in these conditions; c) The minimum...

1) Identify the type of steel (alloy?) with values similar to the following: Modulus of Elasticity...

1) Identify the type of steel (alloy?) with values similar to the following: Modulus of Elasticity = 189.75 MPa Ultimate Tensile Strenght (UTS) = 740.05 MPa Cup Cone Fracture Toughness = 4.84 MPa 2) Identify the type of treated steel(alloy?) with values similar to the following: Modulus of Elasticity = 326.07 MPa Ultimate Tensile Strenght (UTS) = 408.97 MPa Cup Cone Fracture Toughness = 140.91 MPa My guess is that this one is some type of heat treated steel, the...

Determine the Modulus of Elasticity (unit is in GPa) from an aluminium specimen? Determine the 0.2%...

Determine the Modulus of Elasticity (unit is in GPa) from an aluminium specimen? Determine the 0.2% Proof Stress for aluminium (in MPa)? Calculate the Ultimate Tensile Strength (UTS) of aluminium. Given the maximum load of 15800N. The Ultimate Tensile Strength of cast iron is (in MPa)? Given the max load as 23700N. using the following data: Force extension N µm 0 0 2000 17 4000 40 6000 60 8000 80 10000 92 12000 128 14000 160 15500 355 15900 620...

A rectangular rosette is mounted on a steel plate having a modulus f elasticity E=200GN/m2 and...

A rectangular rosette is mounted on a steel plate having a modulus f elasticity E=200GN/m2 and Poission’s ratio =0.3. The strains measured are ε1=500×10-6; ε2=400×10-6; ε3= -100×10-6. Develop a MATLAB code to compute maximum shear stress and the orientation angle for the principle axis of the stress.

Yield strength and modulus of elasticity of steel containing 0.4% carbon had been determined as 300...

Yield strength and modulus of elasticity of steel containing 0.4% carbon had been determined as 300 MPa and 230 GPa, respectively. Estimate the yield strength and modulus of elasticity of the steel for a carbon content of 1.1% and explain the way of your estimation.

a) Determine the modulus of elasticity for a masonry prism made of 4 inc nominal clay...

a) Determine the modulus of elasticity for a masonry prism made of 4 inc nominal clay brick having compressive strength of 8250 psi and type S mortar. b) ) Determine the modulus of elasticity for a masonry prism made of Concrete masonry units compressive strength of 4050 psi and type N mortar. c) What is modulus of rupture of masonry flexural tensile stress normal to bed joints in running bond with solid units and PCL type M mortar. d) An...

How do you determine the properties of steam or refrigerant 134a from the properties if you...

How do you determine the properties of steam or refrigerant 134a from the properties if you know only specific internal energy and specific volume (or specific enthalpy and specific entropy) at the thermodynamic state?

Parameter Steel . Modulus of Elasticity 30,000,000 psi Proportional/Elastic Limit 34,000 psi Allowable Bending Stress 24,000...

Parameter Steel . Modulus of Elasticity 30,000,000 psi Proportional/Elastic Limit 34,000 psi Allowable Bending Stress 24,000 psi Allowable Axial (C or T) Stress 24,000 psi Allowable Shear Stress 16,500 ps You have a 25-foot long, simply supported W12-50 steel beam. It is supporting a single 10,000# point load at its midpoint. Including the weight of the beam, answer the questions below: A. What is the maximum bending moment (foot-#) and resulting maximum bending stress (psi)? Is this allowable? B. What...

Properties of STEEL In the table below, write down as many properties that you can think...

Properties of STEEL In the table below, write down as many properties that you can think of for “STEEL” as a building material. Do some searching on the internet. See if you can fill the sheet.

Question