Yield strength and modulus of elasticity of steel containing 0.4% carbon had been determined as 300...

Yield strength and modulus of elasticity of steel containing 0.4% carbon had been determined as 300 MPa and 230 GPa, respectively. Estimate the yield strength and modulus of elasticity of the steel for a carbon content of 1.1% and explain the way of your estimation.

Expert Solution

Ally Wells answered 9 months ago

Modulus of Elasticity of Concrete? Explain how it is defined. Modulus of Elasticity of steel?

a-Calculate conventional yield effort at 0.2% (0.002 in./in.) b- Tensile strength. c- The modulus of elasticity....

a-Calculate conventional yield effort at 0.2% (0.002 in./in.) b- Tensile strength. c- The modulus of elasticity. d- Elongation e- The reduction in area. f- The engineering effort to fracture g- The real stress to fracture h- The modulus of resilience Magnesium Load (N) Calibrated length (mm) 0 30.00000 5000 30.02960 10000 30.0592 15000 30.0888 20000 30.1500 25000 30.51 26500 30.9 27000 31.5 26500 32.1 25000 32.79 - Initial diameter of the test tube: 12 mm - Initial calibrated length:...

A steel has a modulus of elasticity of 29,000 ksi and an elastic limit of 52...

A steel has a modulus of elasticity of 29,000 ksi and an elastic limit of 52 210 psi. A rod of this material and cross section of 0.0186 in2 and 36 in length is fastened vertically to a beam with a load of 410 lb at the opposite end. Determine: a) If this load is removed, will the bar return to its initial length? Justify the answer; b) The unitary deformation of the bar in these conditions; c) The minimum...

1) Identify the type of steel (alloy?) with values similar to the following: Modulus of Elasticity...

1) Identify the type of steel (alloy?) with values similar to the following: Modulus of Elasticity = 189.75 MPa Ultimate Tensile Strenght (UTS) = 740.05 MPa Cup Cone Fracture Toughness = 4.84 MPa 2) Identify the type of treated steel(alloy?) with values similar to the following: Modulus of Elasticity = 326.07 MPa Ultimate Tensile Strenght (UTS) = 408.97 MPa Cup Cone Fracture Toughness = 140.91 MPa My guess is that this one is some type of heat treated steel, the...

Question 6 Young's modulus, yield strength, ultimate tensile strength and elongation at fracture can ALL be...

Question 6 Young's modulus, yield strength, ultimate tensile strength and elongation at fracture can ALL be determined by a tensile test. True False

What properties do you use to determine the grade of steel (ie modulus of elasticity)?

An ASTM A36 steel having a yield strength of 235 MPa, a tensile strength of 640...

An ASTM A36 steel having a yield strength of 235 MPa, a tensile strength of 640 MPa, and an endurance limit of 210 MPa is subjected to a cyclic loading. Using the Goodman diagram, predict whether the material has an infinite fatigue life, or whether it will fail by yielding or fatigue, when the cyclic stress is between: (i) 0 and 250 MPa. (ii) 95 ± 220 MPa

low carbon steel having a tensile strength of 350 MPa and shear strength of 250 MPa...

low carbon steel having a tensile strength of 350 MPa and shear strength of 250 MPa is cut in a turning operation with a cutting speed of 200 m/min. The feed is 0.3 mm/rev and the depth of cut is 4.8 mm. The rake angle of the tool is 12 degrees in the direction of chip flow. The resulting chip ratio is 0.8. Using the orthogonal model as an approximation of turning determine... a.The shear plane angle. b. Shear force...

A rectangular rosette is mounted on a steel plate having a modulus f elasticity E=200GN/m2 and...

A rectangular rosette is mounted on a steel plate having a modulus f elasticity E=200GN/m2 and Poission’s ratio =0.3. The strains measured are ε1=500×10-6; ε2=400×10-6; ε3= -100×10-6. Develop a MATLAB code to compute maximum shear stress and the orientation angle for the principle axis of the stress.

Yield strength of steel connecting bars. To protect against earthquake damage, steel beams are typically fitted...

Yield strength of steel connecting bars. To protect against earthquake damage, steel beams are typically fitted and connected with plastic hinges. However, these plastic hinges are prone to deformations and are difficult to inspect and repair. An alternative method of connecting steel beams—one that uses high strength steel bars with clamps— was investigated in Engineering Structures ( July 2013). Mathematical models for predicting the performance of these steel connecting bars assume the bars have a mean yield strength of 300...

Question