Design an IIR digital filter based on the bilinear transformation method using the following transfer function...

Design an IIR digital filter based on the bilinear transformation method using the following transfer function as a reference (use three decimal places of precision for your response):
H (s) = 5 / (s ^ 2 + 1.1s +5)
The digital filter must have a resonant frequency at wr = pi / 3

a) Calculate H (z)
b) Find the correctly simplified difference equation of the designed system.
c) Implement the discrete system obtained using block diagram..

Show every step

Solutions

Expert Solution

I have Implemented the block diagram using Direct form-I representation

Manojponduru answered 10 months ago

Next > < Previous

Related Solutions

The filter coefficients of a second-order digital IIR filter are: a0 = 1, a1 = -2,...

The filter coefficients of a second-order digital IIR filter are: a0 = 1, a1 = -2, a2 = 2, b0 = 1, b1 = 1/2, b2 = 1/8. (a's are numerator coefficents and b's are the denominator coefficients). Compute the magnitude response |H(ej?)| where ? = 2.721 rad/sec.

Question, Digital Signal Processing: a)Explain in detail the difference between FIR filter and IIR filter with...

Question, Digital Signal Processing: a)Explain in detail the difference between FIR filter and IIR filter with examples and responses . Explain briefly? b)Write a detail note on Least Squares, explain breifly? NOTE: write the folowing in detaill, thank you.

Obtain the transfer function of a low pass digital filter meeting the following specifications: Passband 0...

Obtain the transfer function of a low pass digital filter meeting the following specifications: Passband 0 − 60 Hz; Stopband > 85 Hz; Stopband attenuation > 15 dB Assume sampling frequency of 256 Hz and having 3rd order Butterworth Characteristics.

Using matlab a) Find the transfer function of a fourth order Butterworth filter and plot the...

Using matlab a) Find the transfer function of a fourth order Butterworth filter and plot the magnitude response. b) Find the poles.

Design a LP FIR filter to meet the following specifications using the window method. Use a...

Design a LP FIR filter to meet the following specifications using the window method. Use a Blackman window. Fs = 25 kHz Fc = 5.0 kHz (3 dB down) Attenuation = 80 dB at 7 kHz Give all the relevant plots (impulse, frequency responses) and the performance of the final filter. Compare this filter to one designed using the optimal method .

Design a LP FIR filter to meet the following specifications using the window method. Use a...

8. In RFLP, this method can be used to transfer DNA to a filter so that...

8. In RFLP, this method can be used to transfer DNA to a filter so that it can be detected with a probe: a. Hybridization b. VNTR c. PCR d. Southern Blotting 9. In VNTR analysis, this consists of a complex barcode-like band pattern generated from multiple VNTR loci: a. Single-locus probe b. Multi-locus probe c. Southern Blotting d. None of the above 10. This technique used in VNTR analysis was pioneered by Sir Alec Jeffreys in 1984: a. Single-locus...

Design an analog elliptic lowpass IIR filter with specifications Fp=10 kHz., Ap=1 dB, Fs=15 kHz. And...

Design an analog elliptic lowpass IIR filter with specifications Fp=10 kHz., Ap=1 dB, Fs=15 kHz. And As=50 dB. Provide the following plots in MATLAB: a. Magnitude b. Log-magnitude c. Group-delay d. Impulse response e. Pole-zero

1.Design a parallel RLC bandpass filter, derive the transfer function H(s). Compute center frequency, Wo. Calculate...

1.Design a parallel RLC bandpass filter, derive the transfer function H(s). Compute center frequency, Wo. Calculate the cutoff frequencies Wc1 and Wc2, the bandwidth (Beta), and quality factor, Q. Compute the values for R and L to yield a bandpass filter with a center frequency of 5kHz and a bandwidth of 200Hz, using a 10nF capacitor.

2. Design a digital lowpass filter to meet the following specifications: passband edge = 0:45π stopband...

2. Design a digital lowpass filter to meet the following specifications: passband edge = 0:45π stopband edge = 0:5π Rp = 0.5 dB, As = 60 dB a. Design a Buttterworth filter, you may use the butteworth and butter commands to implement. b. Design Chebyshev Type 1 filter ( use the equivalent commands to above ) c. Design an Elliptic filter ( use the equivalent commands to part a ). d. List the order of each filter and find the...

Subjects