Question

In: Electrical Engineering

An unbalanced wye connected wye connected load of three phase resistances with Ra=60 ohms, Rb=40 ohms...

An unbalanced wye connected wye connected load of three phase resistances with Ra=60 ohms, Rb=40 ohms and Rc=80 ohms is connected to a 440V, negative sequence, balanced 3 phase, 3 wire supply. Calculate the complex power using the method of symmetrical components.

Please show all steps and clearly show all answers.

Solutions

Expert Solution

Please note the fact that all the complex arithmetic and matrix operations can be performed with the help of a advanced scientific calculator. If you want to discuss regarding this problem, then please let me know in the comments. Thanks...


Related Solutions

An unbalanced three-phase wye-connected and grounded load is connected to a balanced three-phase four-wire source. The...
An unbalanced three-phase wye-connected and grounded load is connected to a balanced three-phase four-wire source. The load impedances are Za = 14+j3 Ω , Zb = 5-j24Ω and Zc =1+j14 Ω  and the phase a line voltage has an effective value of 18 Kv: use line-to-neutral voltage of phase A as a reference. Find the line and neutral current, also find the reactive power delivered to load and power factor.
Three equal impedances, (8+j6) ohms are connected in wye across a three-phase, three-wire supply. The symmetrical...
Three equal impedances, (8+j6) ohms are connected in wye across a three-phase, three-wire supply. The symmetrical components of the phase A line voltages are: Va0 = 0 Va1 = 220 + j 28.9 V Va2 = -40 - j 28.9 If there is no connection between the load neutral and the supply neutral, Calculate the symmetrical currents of line a,b, and c.
A series-connected dc motor is designed to operate with a variable load. The resistances RA and...
A series-connected dc motor is designed to operate with a variable load. The resistances RA and RF are negligible. To attain high efficiency, the motor has been designed to have very small rotational losses. For a load torque of 80 N?m , the machine runs at its maximum rated speed of 1300 rpm . Find the speed for a load torque of 350 N?m
A three-phase balanced star load No. 1 of (120 +j90) ohms in parallel with another three-phase...
A three-phase balanced star load No. 1 of (120 +j90) ohms in parallel with another three-phase balanced star load No. 2 of (90 +j120) ohms, both are fed by three-phase balanced conductors of 3 ohms resistance and 4 ohms reactance. If the generator is 240 volts, with angle of -150° on phase c and reactance of 1 ohms, determine: a) the current on load N°1 on phase C, b) the terminal voltage of the generator on phase B, c) the...
A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission...
A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission line. The line-line voltage for the source is 100∟0° V/phase and the impedance of load is (27 + j18) Ω/phase. The transmission line has an impedance of (1 + j4) Ω/line. a) Draw the complete schematic of the power system showing the location of wattmeters. (Two-Wattmeter system is considered for this problem). Phase “a” could be considered as a reference phase. b) What must...
A 3phase,400V sourcesupplies a delta connected load having phase impedances Zab=25? 0º ohms, Zbc=25?30º ohms, and...
A 3phase,400V sourcesupplies a delta connected load having phase impedances Zab=25? 0º ohms, Zbc=25?30º ohms, and Zca=25?-30º ohms. The magnitude of all the phase currents is ____ A.
A 100 ohms load is connected to a 50 ohms transmission line. Determine the value of...
A 100 ohms load is connected to a 50 ohms transmission line. Determine the value of the reactance to put in series at the input to the line and the length in wavelengths of the shortest transmission line to match with a 50 ohms source.
b) The load connected to a three-phase supply comprises three similar coils connected in star. If...
b) The load connected to a three-phase supply comprises three similar coils connected in star. If the phase currents are 10A and the total active power and power factor absorb by the loads are 3kW and 0.8 lagging, respectively. Find: i. The magnitude of phase and line voltages ii. Total apparent power (1 mark) iii. The impedance of each coil. c) If the coil in Q3(b) are now connected in delta to the same three-phase supply, calculate the magnitude of...
Three balanced three-phase loads are connected in parallel. Load 1 is Y-connected with an impedance of...
Three balanced three-phase loads are connected in parallel. Load 1 is Y-connected with an impedance of 420+300i Ω/ϕ ; load 2 is Δ-connected with an impedance of 2400-1780i Ω/ϕ ; and load 3 is 170.1+2201i kVA . The loads are fed from a distribution line with an impedance of 2+17i Ω/ϕ . The magnitude of the line-to-neutral voltage at the load end of the line is 23√3 kV. Part A: Calculate the total complex power at the sending end of...
Three resistors of 20, 50 and 60 ohms are connected to a battery having an emf...
Three resistors of 20, 50 and 60 ohms are connected to a battery having an emf of 15 volts. Draw the circuit diagram and determine the total resistance, the total and individual currents, total and individual voltages if the resistors are connected in series.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT