Water flowing at a rate of 0.667 kg/s (Cp = 4.192 kJ/kg. K) enters a counter...

Water flowing at a rate of 0.667 kg/s (Cp = 4.192 kJ/kg. K) enters a counter current heat exchanger at 318 K and is heated by an oil stream entering at 393 K at a rate of 2.85 kg/s (Cp=1.89 kJ/kg. K). The overall U=290 W/m2. K and the area A=20 m2. Calculate the heat transfer rate and the exit water temperature.

Expert Solution

samet mamat answered 2 years ago

A gas with cp = 0.950 kJ/kg-K enters an insulated nozzle at 30oC and a velocity...

A gas with cp = 0.950 kJ/kg-K enters an insulated nozzle at 30oC and a velocity of 8 m/s. The gas exits at a velocity of 100 m/s. Assuming constant specific heats and ideal gas behavior, what is the exit temperature of the gas?

Air (cp = 1.0 kJ/kgK) enters an air conditioning system at 40C with a mass flow...

Air (cp = 1.0 kJ/kgK) enters an air conditioning system at 40C with a mass flow rate of 1.5 kg/s. The air is cooled by exchanging heat with a stream of R-134a refrigerant that enters the heat exchanger at -8C and 20% quality, and exits with 100% quality. If 25 kW of heat is transferred out of the air, determine: (40 pts) i) Mass flowrate of R-134a (kg/hr) ii) Exit temperature of air (C) iii) Exit pressure of R-134a (kPa)

Water ( ρ= 1000 kg/m3; Cp= 4.2 kJ/kg.K; k= 0.58 W/m.K ) at 1,537 kg/hr and...

Water ( ρ= 1000 kg/m3; Cp= 4.2 kJ/kg.K; k= 0.58 W/m.K ) at 1,537 kg/hr and 26oC enters a 10-mm-diameter smooth tube whose wall temperature is maintained at 79oC. If the water's Nusselt number (Nu) = 375, and the tube length is 7.6, calculate the water outlet temperature,in oC.

Air (Cp = 1.005 kJ/kg · K) is to be preheated by hot exhaust gases in...

Air (Cp = 1.005 kJ/kg · K) is to be preheated by hot exhaust gases in a cross-flow heat exchanger before it enters the furnace. Air enters the heat exchanger at 95 kPa and 20◦C at a rate of 0.90 kg/s. The combustion gases (Cp = 1.1 kJ/kg · K) enter at a rate of 1.1 kg/s and 150◦C. The product of the overall heat transfer coefficient and the heat transfer surface area is U A = 1200 W/K. Assuming...

Water flowing at a rate of 0.03 kg/s is heated from 20 to 40°C in a...

Water flowing at a rate of 0.03 kg/s is heated from 20 to 40°C in a horizontal pipe (inside diameter = 3 cm). The inside pipe surface temperature is 70°C. Estimate the convective heat transfer coefficient if the pipe is 1 m long. Assume forced convection conditions. Ts is not held constant! Properties of Water 20°C 30°C 40°C ρ (kg/m3) 998.2 995.7 992.2 k (W/mK) 0.597 0.615 0.633 μ (Pa s) 993.414 x 10-6 792.377 x 10-6 658.026 x 10-6 Cp...

A double-pipe heat exchanger operating in counter current mode is to heat a fluid(Cp 1.7 kJ/kg...

A double-pipe heat exchanger operating in counter current mode is to heat a fluid(Cp 1.7 kJ/kg K) from 50°C to 95°C at a rate of 4.5 kg/s. The heating is to be accomplished by hot fluid (Cp=1.97 kJ/kg K) available at 200°C at a mass flow rate of 6 kg/s. The inner tube is thin-walled and has a diameter of 4 cm. If the overall heat transfer coefficient of the heat exchanger is 680 W/m2 °C, determine the length of...

Nitrogen (N2), at 300 K, 1 bar with a mass flow rate of 1 kg/s enters...

Nitrogen (N2), at 300 K, 1 bar with a mass flow rate of 1 kg/s enters an insulated mixing chamber and mixes with carbon dioxide (CO2) entering as a separate stream at 500 K, 1 bar with a mass flow rate of 0.5 kg/s. The mixture exits at 1 bar. Assuming ideal gas behavior, for steady-state operation, determine (a) the molar analysis (i.e., the molar flow rate for each gas) of the exiting mixture, (b) the exit mixture temperature, and...

Air at 1 atm flowing at a rate of 0.1 kg / s has to be...

Air at 1 atm flowing at a rate of 0.1 kg / s has to be cooled from 400 to 300K in a tube of 10 cm in diameter with a uniform wall temperature of 250 K. Determine the length of the tube.

Oil (s = 0.850 and µ = 14.0 cP) is flowing out the end of a...

Oil (s = 0.850 and µ = 14.0 cP) is flowing out the end of a 100 ft long pipe with a diameter of 4.026 in at the maximum flow rate to remain in the laminar flow regime. (a) At what angle, in degrees, would you have to tilt this pipe so that the pressure drop is zero? Is the angle uphill or downhill? l (b) How much work is lost to friction? Give your answer in lbf ft/lbm. Answers...

Water flowing at a rate of 100 Kg/min at 100 oC and 20 bars is heated...

Water flowing at a rate of 100 Kg/min at 100 oC and 20 bars is heated at constant pressure to 400 oC. What are the initial and final phases of the water (subcooled liquid, saturated liquid, saturated steam, or superheated steam)? (saturation temperature of water at 20 bars is 212.4 oC).

Question