Air at 1 atm flowing at a rate of 0.1 kg / s has to be...

Air at 1 atm flowing at a rate of 0.1 kg / s has to be cooled from 400 to 300K in a tube of 10 cm in diameter with a uniform wall temperature of 250 K. Determine the length of the tube.

Expert Solution

samet mamat answered 2 years ago

Ethane gas (C2H6) is burned with air. The fuel flow rate is 0.1 kg/s and the...

Ethane gas (C2H6) is burned with air. The fuel flow rate is 0.1 kg/s and the air flowrate is 2.2 kg/s. Ethane’s enthalpy of formation is -84,680 kJ/kmol. Determine: The equivalence ratio Ethane’s lower heating value by deriving it from enthalpy of formation data. The heat release rate, in kW. The mass fraction of oxygen in the products. The mass of CO2 emitted per 1000 hours of operation. The mass of fuel burned per 1000 hours of operation. The adiabatic...

1.7 kg/s NH3 and 20 m3/s air at 25 oC and 1 atm are fed into...

1.7 kg/s NH3 and 20 m3/s air at 25 oC and 1 atm are fed into a reactor in which the ammonia is completely consumed. The product gas emerges at 300 oC. Calculate the rate at which heat must be transferred to or from the reactor, assuming operation at approximately 1 atm. You must show full systematic working. The standard heat of reaction for the oxidation of ammonia is given below: 4 NH3(g) + 5 O2(g) ? 4 NO(g) +...

A stream of air (21mole% O2, the rest N2) flowing at a rate of 30 kg/h...

A stream of air (21mole% O2, the rest N2) flowing at a rate of 30 kg/h is mixed with a stream of CO2. The CO2 enters the mixer at a rate of 23.6 m3/h at 200 oC and 1.5 bar. What is the mole % of CO2 in the product gas? a) Calculate the number of kg. moles of air flowing b) Calculate the number of kg. moles of CO2 c) Calculate the mole percent of CO2 in the mixture?

Air at 20°C (1 atm) is flowing over a 0.025-m diameter sphere with a velocity of...

Air at 20°C (1 atm) is flowing over a 0.025-m diameter sphere with a velocity of 3.5 m/s. If the surface temperature of the sphere is constant at 80°C, determine the Reynolds number corresponding to the sphere, its average drag co-efficient, and the heat transfer rate from the sphere. The properties of air (1 atm) at the free stream temperature T∞ = 20°C, ρ = 1.204 kg/m3, k = 0.02514 W/m∙K, μ = 1.825 × 10−5 kg/m∙s, and Pr = 0.7309. At the surface temperature Ts= 80°C: μs =...

Water flowing at a rate of 0.667 kg/s (Cp = 4.192 kJ/kg. K) enters a counter...

Water flowing at a rate of 0.667 kg/s (Cp = 4.192 kJ/kg. K) enters a counter current heat exchanger at 318 K and is heated by an oil stream entering at 393 K at a rate of 2.85 kg/s (Cp=1.89 kJ/kg. K). The overall U=290 W/m2. K and the area A=20 m2. Calculate the heat transfer rate and the exit water temperature.

If hydrogen is burned at a rate of 1 kg/s, to completion, with 25% excess air...

If hydrogen is burned at a rate of 1 kg/s, to completion, with 25% excess air to generate electricity in a modified combustion turbine, what is the dew point temperature (°C) of the flue gas? Assume exit of the combustion chamber at 150 kPa.

Water flowing at a rate of 0.03 kg/s is heated from 20 to 40°C in a...

Water flowing at a rate of 0.03 kg/s is heated from 20 to 40°C in a horizontal pipe (inside diameter = 3 cm). The inside pipe surface temperature is 70°C. Estimate the convective heat transfer coefficient if the pipe is 1 m long. Assume forced convection conditions. Ts is not held constant! Properties of Water 20°C 30°C 40°C ρ (kg/m3) 998.2 995.7 992.2 k (W/mK) 0.597 0.615 0.633 μ (Pa s) 993.414 x 10-6 792.377 x 10-6 658.026 x 10-6 Cp...

Air flowing at 1000 ft3 /min, 66°F, and 1 atm enters a heat exchange unit and...

Air flowing at 1000 ft3 /min, 66°F, and 1 atm enters a heat exchange unit and exits at 76°F and 1 atm. Saturated steam at 12 psia is used to heat the air and leaves the unit operation as saturated water at 12 psia. The system is not adiabatic and heat is lost to the surroundings at -3 Btu/lbm steam condensed. Calculate the mass flow rate of the steam.

3) Air flows steadily at the rate of 0.4 kg/s through an air compressor, entering at...

3) Air flows steadily at the rate of 0.4 kg/s through an air compressor, entering at 6 m/s with a pressure of 1 bar and a specific volume of 0.85 m3/kg, and leaving at 4.5 m/s with a pressure of 6.9 bar and a specific volume of 0.16 m3/kg. The internal energy of air leaving is 88 kJ/kg greater than that of the air entering. Cooling water in a jacket surrounding the cylinder absorbs heat from the air at...

Consider the following combined cycle. The mass flow rate of air is 73 kg/s. Air enters...

Consider the following combined cycle. The mass flow rate of air is 73 kg/s. Air enters the compressor at state 1 with Patm =1 atm and Tamb = 20°C. The compressor has a pressure ratio of 7.5 and an efficiency ?c = 0.85. Air enters the combustor and is heated to a temperature TH = 1250°C. The turbine has an efficiency of ?t,1 = 0.87. The air leaving the turbine enters the steam boiler where it transfers heat to the...

Question