two large aluminum plates (k =240W/m.K) each 1cm thick with 10micrometer surface roughness are placed in...

two large aluminum plates (k =240W/m.K) each 1cm thick with 10micrometer surface roughness are placed in contact under a pressure of 1bar in air (k=0.026W/m.K). The temperature at the inside and outside surfaces is 400 degrees Celsius and 150degrees Celsius. Calculate the heat Flux and the temperature drop due to contact resistance.

Expert Solution

samet mamat answered 2 years ago

Two infinitely long plates with surface temperatures maintained at 600 K and 300 K respectively are...

Two infinitely long plates with surface temperatures maintained at 600 K and 300 K respectively are placed parallel to each other. Two infinitely long radiation shields are placed in the evacuated space between these plates. All the surfaces mentioned above are gray and diffuse and have an emissivity of 0.85. Determine the steady state temperatures of the radiation shields.

A dielectric slab of thickness b and dielectric constant k is placed between the plates of...

A dielectric slab of thickness b and dielectric constant k is placed between the plates of a parallel plate capacitor of plate area A and separation d. A potential difference ?o is applied with no dielectric present. The battery is then disconnected and the dielectric lab is inserted. Assume that ?=100cm2,?= 1.0cm,?=0.50c,?=7.0 and Vo=100 ?. a. The capacitance ?o before the slab is inserted. b. The capacitance C with the slab inserted. c. The free charge q. d. The electric...

Consider steady heat transfer between two large parallel plates at constant temperatures of T1 582 K...

Consider steady heat transfer between two large parallel plates at constant temperatures of T1 582 K and T2 196 K that are 6.8 cm apart. Assuming the surfaces to have emissivity 0.9 , determine the rate of heat transfer between the plates per unit surface area assuming the gap between the plates is (a) filled with atmospheric air (b) evacuated (c) filled with fiberglass insulation, and (d) filled with super insulation having an apparent thermal conductivity of 0.00045 W/m ·...

Two large thin metal plates are parallel and close to each other as in figure shown...

Two large thin metal plates are parallel and close to each other as in figure shown above. On their inner faces, the plates have surface charge densities of opposite signs and of magnitude 7 * 10-22 C/m2. The negatively charged plate is on the left and the positively charged plate is on the right. What are the magnitude and direction of the electric field E (a) to the left of the plates? » Direction: ? Straight out of the computer...

If an aluminum oxide at room temperature (25°C) is placed on hot oven where it's surface...

If an aluminum oxide at room temperature (25°C) is placed on hot oven where it's surface is heated to 100°C at time t=0, how long would it take for the material to reach 80°C, 1 mm from the surface? Thermal diffusivity of the aluminum oxide is 11 cm²/s. The answer should be in milliseconds. Hint: Apply the Fick's second law. SUBMIT YOUR SOLUTION! material science course

USE EXCEL TO SOLVE After heat treatment, the 2-cm thick metal plates (k = 180 W/m·K,...

USE EXCEL TO SOLVE After heat treatment, the 2-cm thick metal plates (k = 180 W/m·K, ρ = 2800 kg/m3, and cp = 880 J/kg·K) are conveyed through a cooling chamber with a length of 10 m. The plates enter the cooling chamber at an initial temperature of 500°C. The cooling chamber maintains a temperature of 10°C, and the convection heat transfer coefficient is given as a function of the air velocity blowing over the plates h = 33V0.8, where...

Two large, thin, metal plates of 0.5mx0.5m face each other. They are spaced 2cm apart and...

Two large, thin, metal plates of 0.5mx0.5m face each other. They are spaced 2cm apart and have equal but opposite charges on their inner surfaces. a) if the magnitude E of the electric field between the plates is 700 N/C what is the magnitude of the charge on each plate? b) Integrate E across the gap between the plates to find the potential difference V and hence the capacitance C. c) Recalculate C using the parallel plate capacitator formula instead....

Two large, flat metal plates are parallel to each other, a distance d apart. A charge...

Two large, flat metal plates are parallel to each other, a distance d apart. A charge of Q is placed on them and then they are electrically isolated. As a result, at the midpoint between the two plates the electric field has magnitude E. If the separation of the plates is then reduced to d/2 what is the magnitude of the electric field at the midpoint? A) 2E B) E/2 C) 0 D) 4E E) E

Two copper plates 0.50cm thick have a 0.10mm sheet of glass sandwiched between them. One copper...

Two copper plates 0.50cm thick have a 0.10mm sheet of glass sandwiched between them. One copper plate is kept in contact with flowing ice water and the other is in contact with stream. What are the temperatures of the two copper-glass interfaces, and what is the power transferred through a 10cm by 10cm area? kcopper=385 K/mC and kglass=0.8 K/mC The answers given are: 9C, 91 C, and 6.6E3 W. I am just trying to learn the process of solving problems...

1. The ideal model of two oppositely charged conducting plates with surface charge densities says that...

1. The ideal model of two oppositely charged conducting plates with surface charge densities says that there is a constant electric field between the plates and zero field outside. How does your model differ from the ideal model? Why does it differ? 2. Create your own question about electric fields and/or potentials that could be answered using this applet. The “Charges and Fields” applet here: https://phet.colorado.edu/en/simulation/charges-andfields.

Question